Arc Protection Relay REA 10_ - APE Distribuidor ABB

Arc Protection Relay REA 10_1MRS750929-MBGTable 13: Environmental testsSpecified service temperature range-10...+55°CTransport and storage temperature range-40...+70°COperation in dry heat conditions According to IEC 60068-2-2Operation in dry cold conditions According to IEC 60068-2-1Damp heat test cyclic According to IEC 60068-2-30r.h. >95%, t = 20...55°CStorage temperature test According to IEC 60068-2-48Table 14: EncapsulationREA 101 Degree of protection, IEC 60529 IP 20Weightabout 4.6 kgREA 103 Degree of protection, IEC 60529 IP 20Weightabout 1.1 kgREA 105 Degree of protection, IEC 60529 IP 20Weightabout 1.1 kgREA 107 Degree of protection, IEC 60529 IP 20Weightabout 1.0 kgTable 15: Insulation testsDielectric tests according to IEC 60255-5Impulse voltage test according to IEC 60255-5Insulation resistance according to IEC 60255-52 kV, 50 Hz, 1 min.5 kV, 1.2/50 µs, 0.5 J>100 MΩ, 500 V DCTable 16: Electromagnetic compatibility testsEMC immunity test level meets the requirements listed below:1 MHz burst disturbance test according to IEC 60255-22-1, class III:Common modeDifferential modeElectrostatic discharge test according to IEC 61000-4-2, class IV andANSI/IEEE C37.90.3-200:For contact dischargeFor air discharge2.5 kV1 kV8 kV15 kVRadio-frequency electromagnetic field disturbance test according to IEC 61000-4-3 andIEC 60255-22-3:Amplitude-modulated:Frequency fField strength EPulse-modulated:Frequency fField strength ERadio frequency disturbance test according toIEC 61000-4-6 and IEC 60255-22-6:Conducted, common modeFast transient disturbance tests according toIEC 60255-22-4 and IEC 61000-4-4Surge immunity test according to IEC 61000-4-5 and IEC 60255-22-5:Aux. voltage input, trip outputs:Line-to-lineLine-to-earthSignal contacts (IRF), current inputs, RESET input:Line-to-lineLine-to-earthElectromagnetic emission tests according to EN 55011 and IEC 60255-25:80...1000 MHz10 V/m (rms)900 MHz10 V/m (rms)10 V, 150 kHz...80 MHz4 kV2 kV4 kV1 kV2 kV10