Iskra Zascite

IMH-TC SeriesDATA/SIGNAL LINES PROTECTIONDimensional drawings689045PG17.5IM baseIM S-GDT baseIM 2GND baseConnection diagramVarious options for the base unit exist including:RRS-GDT base: where a coaxial shield is used andequipotential ground equalization is required.2 GND base: where a second ground terminal (inaddition to the DIN rail ground strip) is provided forinstallations not utilizing DIN rail.TCabIMH-TC 110 VGDTRPGMOVMOVMOVbase,a,babIMH-TC 5 V - 60 VGDTRPGDBbase,a,bRRabGDTTCRMOVMOVMOV,a,babGDTRDB,a,bSGGDTSGSGGDTSGS-GDT baseS-GDT baseIMH-TC 110 VPGIMH-TC 5 V - 60 VPGLegend:TDGDTMOVRDDBSGPGthermal decouplergas discharge tubevaristorresistordiodediode blocsignal groundingprotective groundingTCabPGIMH-TC 110 VRGDTRPGMOVMOVMOV2GND base,a,bRGDTaRbPGPGIMH-TC 5V - 60 VDB2GND base,a,bAccessory Part for IMH-TCTesting module IM TESTA testing module IM TEST is intended for performing measurements on the IM bases.A module enables performing of the measurements on both input and output sides.It is equipped with five banana sockets with D = 2 mm. Red terminals are connected to the module's output, blueones are connected to the module's input, whereas yellow one is connected to the grounding contact.TypeIMTestOrdering code 127 145www.iskrazascite.si23