Iskra Zascite

CCP-L/4-N SeriesCOAXIAL/RF PROTECTIONIEC category / EN type: C1/C2/C3 (IEC 61643-21)Design Bulkhead, impedance matchedMax. Peak Power:500WFreq:865 - 965MHz, 1700 - 1950MHzCharacteristic Impedance: 50ΩInsertion loss:< 0.2dBReturn loss:> 20dBSurge Discharge Ratings: I N: 15kA 8/20µs, I MAX : 30kA 8/20µsEnclosure:Shielded enclosure, bulkhead installationTermination:L/4-N-Type M-F and F-F availableThe CCP-L/4-N series of coaxial surge protectors is intended to protect base station RF antenna systems and issuitable for frequencies from DC to 865 - 965 Mhz, 1700 - 1950MHz.It is designed for bulkhead or in-line installation. The careful design, low intermodulation and high quality 7/16-typetermination connectors ensure a minimum of insertion loss throughout the frequency band.Transfer power is 500W.The CCP coaxial cable protector is designed in accordance with the following standards and regulations:- IEC 61643-21:2000Technical characteristicsType CCP-L/4 CCP-L/4-N-MF -N-FFMax. Continuous operating voltage U C0V 0VMax. peak power 500W 500WImpedance 50ΩFrequency range 865 - 965, 1700 - 1950MHzInsertion losses < 0.2dBReturn losses > 20dBNom. discharge current (8/20µs) I n15kAMax. discharge current (8/20µs) I max30kAVoltage protection level U p< 100VInsulation > 10GΩWeight 282g 266gOperation temperature - 40oC … + 80oCStyle of connector L/4-N male / female L/4-N female / femaleOrdering code 800 757 800 758Dimensional drawingsConnection diagramCCP-L/4-N-MF2482245858CCP-L/4-N-FF74PEwww.iskrazascite.si71