Iskra Zascite

ZV1; ZV1-F SeriesCOAXIAL/RF PROTECTIONIEC category / EN type: C1/C2/C3 (IEC 61643-21)Design:Impedance matchedNom. Operating Voltage U n:48VDCMax. Operating Voltage U c:60VDCFreq:40 - 860MHzSurge Discharge Ratings: I n: 5kA 8/20µs, I max: 10kA 8/20µsSeries load current:100mAEnclosure:Shielded enclosure, in-line installationTermination:IEC; F connectorsThe aerial adapters ZV1 (ZV1-F) are intended for the protection of TV sets, aerial amplifiers and cable televisionCATV.It should be connected to the aerial input of the TV set, with the coaxial cable from the aerial plugged into the otherside. It should be grounded to the protective earth conductor of the housing installation.In the case of an individual aerial system with an individual aerial amplifier it is recommended to install anadditional aerial adapter which should be connected in the same way as for the TV set.The aerial adapter is not suitable for outdoor installation or installation in very damp places.Technical characteristicsType ZV-1ZV1-FProtection construction Protective moduleNominal operating voltage U 48V 48Vn DC DCMax. operating voltage U 60V 60Vc DC DCRated spark overvoltage (wire-shield) 90V - 110V 90V - 110VoRated operating current at 25 C I 100mA 100mALNominal discharge current (8/20µs) I 5kA 5kAnResidual voltage at 5kA (8/20µs) < 500V < 500VResponse time of overvoltage protection (wire-shield) < 25ns < 25nsInsulation resistance of the protection (wire-shield) ≥ 6MΩ ≥ 6MΩSerial resistance R < 0.1 Ω < 0.1 ΩLimit frequency f G40 - 860MHz 40 - 860MHzOperating temperature - 40oC … + 80oCDegree of protection IP 20Casing material MetalConnection IEC FOrdering code 125 090 125 210Dimensional drawingsConnection diagramZV1-FZv1737817 17Legend:MOVLCPGvaristorcoilcapacitorprotective groundingLINEMOVLMOVPGCEQUIP62www.iskrazascite.si