Iskra Zascite

CCP-L/4-7/16 SeriesCOAXIAL/RF PROTECTIONIEC category / EN type: C1/C2/C3 (IEC 61643-21)Design Bulkhead, impedance matchedMax. Peak Power:500WFreq:865 - 965MHz, 1700 - 1950MHzCharacteristic Impedance: 50ΩInsertion loss:< 0.2dBReturn loss:> 20dBSurge Discharge Ratings: I N: 15kA 8/20µs, I MAX : 30kA 8/20µsEnclosure:Shielded enclosure, bulkhead installationTermination:L/4-7/16-Type M-F and F-F availableThe CCP-L/4-7/16 series of coaxial surge protectors is intended to protect base station RF antenna systems andis suitable for frequencies from DC to 865 - 965 Mhz, 1700 - 1950MHz.It is designed for bulkhead or in-line installation. The careful design, low intermodulation and high quality 7/16-typetermination connectors ensure a minimum of insertion loss throughout the frequency band.Transfer power is 500W.The CCP coaxial cable protector is designed in accordance with the following standards and regulations:- IEC 61643-21:2000Technical characteristicsType CCP-L/4 CCP-L/4-7/16-MF -7/16-FFMax. Continuous operating voltage U C0V 0VMax. peak power 500W 500WImpedance 50ΩFrequency range 865 - 965, 1700 - 1950MHzInsertion losses < 0.2dBReturn losses > 20dBNom. discharge current (8/20µs) I n15kAMax. discharge current (8/20µs) I max30kAVoltage protection level U p< 100VInsulation > 10GΩWeight 320g 312gOperation temperature - 40oC … + 80oCStyle of connector L/4-7/16 male / female L/N-7/16 female / femaleOrdering code 800 755 800 756Dimensional drawingsConnection diagramCCP-L/4-7/16-MFCCP-L/4-7/16-FF6929 2963 6369PE70www.iskrazascite.si