Iskra Zascite

CCP-N SeriesCOAXIAL/RF PROTECTIONIEC category / EN type: C1/C2/C3 (IEC 61643-21)Design:In-line. Impedance matchedMax. Operating Voltage U C:70, 180, 280VMax. Peak Power:40, 125, 300W respectivelyFreq:DC 2.6GHzCharacteristic Impedance: 50ΩInsertion loss:< 0.4dBReturn loss:> 20dBSurge Discharge Ratings: I N: 10kA 8/20µs, I MAX : 20kA 8/20µsEnclosure:Shielded enclosure, in-line installationTermination:N - Type. M-F and F-F availableThe CCP-N series of coaxial surge protectors is intended to protect RF antenna systems and is suitable forfrequencies from DC to 2.4 GHz.It is designed as an in-line unit allowing ease of installation. The careful design, low capacitance gas dischargearresters and high quality N-type termination connectors, ensures a minimum of insertion loss throughout thefrequency band.Transfer power is 40W to 300W continuous (depending on CCP voltage).The CCP coaxial cable protector is designed in accordance with the following standards and regulations:- IEC 61643-21:2000A grounding stud is provided which should be connected to the system ground, or coaxial feed-through bulkhead,as directly as possible.Technical characteristicsType CCP70 CCP180 CCP280 CCP70 CCP180 CCP280-N-FF -N-FF -N-FF -N-MF -N-MF -N-MFMax. Continuous operating voltage U C70V 180V 280V 70V 180V 280VMax. peak power 40W 125W 300W 40W 125 W 300 WImpedance 50ΩFrequency range 0 - 2600MHzInsertion losses < 0.4dBReturn losses > 20dBNom. discharge current (8/20µs) I n10kAMax. discharge current (8/20µs) I max20kAResidual voltage (1kV/µs) < 600V < 700V < 900V < 600V < 700V < 900VInsulation > 10GΩWeight 138g 138g 138g 142g 142g 142gOperation temperature - 40oC … + 80oCStyle of connector N female / female N male / femaleOrdering code 800 723 800 724 800 725 800 726 800 727 800 728Dimensional drawingsConnection diagramCCP-N-MF2560CCP-N-FFLINELINE25SHIELDSHIELD57PEwww.iskrazascite.si65