Linear Roller Way Super X

Identification numberThe specification of Linear Roller Way Super X is indicatedby the identification number, consisting of a model code,a size, a part code, a material symbol, a preload symbol,a classification symbol, an interchangeable code, and anysupplemental codes.qSeriesFlange type mounted from theupper/lower side LRX 1 Block type mounted from the uppersideLRXDCompact block type mounted fromthe upper side LRXSFor available models and sizes, see Table 1.For the model code of a single track rail ofinterchangeable specification, indicate LRX.Note 1 The size 20 models can be mounted from the upper side only. For mounting from the lowerside, LRXH can be used.Interchangeable specificationSlide unitTrack railAssembled setNon-interchangeable specificationAssembled setqSerieswLength of slide unitModelcodeLRX C 35 C1 T2 P S1 / ZLRX 35 R640 P S1 / FLRX C 35 C1 R640 T2 P S1 / FZLRX C 35 C1 R640 T2 P / FZwLength of slide uniteSize of rolling guideShortStandardHigh rigidity longCNo symbolG12, 15, 20, 25, 30, 35, 45, 55,65, 85, 100Table 1 Models and sizes of Linear Roller Way Super XMaterialHigh carbonsteel madeStainlesssteel madeShapeFlange typeBlock typeCompact blockBlock typeNote 1 The interchangeable specification is not available.rNumber of slide unitsAssembled setSlide unitCC1For available models and sizes, see Table 1.For available models and sizes, see Table 1.SizeModel12 15 20 25 30 35 45 55 65 85 100LRXC LRX 1 LRXG 1 1 LRXDC LRXD LRXDG LRXSC LRXS LRXSG LRXDCSL LRXD SL LRXDGSL For an assembled set, indicate the number of slideunits assembled on one track rail. For a slide unit,only “C1” can be indicated.eSize of rolling guideSizetLength of track railAssembled setTrack railRRIndicate the length of track rail in mm. For standardand maximum lengths, see Table 17 on page 27.rNumber of slide unitsyMaterialHigh carbon steel made No symbolStainless steel made SLFor available models and sizes, see Table 1.tLength of track railPart codeuPreload amountStandardLight preloadMedium preloadHeavy preloadNo symbolT1T2T3Specify this item for an assembled set or a slide unit.Note that, for the slide unit of interchangeablespecification, the preload amount that can be specifieddiffers depending on the size. For details of preloadamount, see Table 3 on page 13.yMaterialuPreload amountMaterialsymbolPreloadsymboliAccuracy classHighPrecisionSuper precisionUltra precisionHPSPUPThe super precision classSPand the ultra precisionclassUPapply to the non-interchangeable specificationproducts. In case of interchangeable specification products,assemble track rails and slide units of the same accuracyclass. For details of accuracy, see Table 2 on page 13.iAccuracy classClassificationsymboloInterchangeable codeSelect group S1Select group S2S1S2Specify this item for interchangeable specificationproducts. Assemble track rails and slide units with thesame interchangeable code. Performance and accuracyof “S1” group and “S2” group are the same.oInterchangeable!0Special specificationInterchangeablecodeSupplementalcode!0Special specificationA, D, E, F, GE, HP,, J, L, LF, MN,N, PS, Q, T, V,W, Y, ZFor applicable special specifications, see Table 5 onpage 14.111N0.102kgf0.2248lbs.1mm0.03937inch 12