Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Conduct <strong>OnGrade</strong> Bore - 30<strong>OnGrade</strong> Operator’s <strong>Manual</strong>Calibrate SystemRollTurn drill housing to 12 o’clock position and verify roll position on tracker. If it is incorrect when using anendload housing, verify that the timing slot on the front of the beacon is engaged with the locating pin in thehousing. If it is still incorrect or when using a sideload housing, select “Roll Calibration” in “BeaconSettings” menu and follow prompts.Pitch1. Rotate beacon housing to appropriateposition for drilling mode.• JT mode: 12 o’clock position• AT mode: 9 or 3 o’clock position2. Place level on beacon housing and adjustrollers (shown) until housing is level (0.0%).Select “Pitch Calibration” in “BeaconSettings” menu and follow prompts.e14om012t.epsCMW
Change language