10x4 DVI Dual Link Matrix - Gefen

More documents

Recommendations

Info

RS-232 SERIAL CONTROL#EDIDDSTOLO FunctionThe #EDIDDSTOLO function reads the downstream EDID and stores it to a LocalEDID input.Syntax:#EDIDDSTOLO param1 param2 [param3...param9]Parameters:param1 A downstream monitor [1 - 4]param2 Input list [1 - 10]Notes:If param2 = 0, then the downstream EDID is stored to all 10 <strong>DVI</strong> inputs.Examples:#EDIDDSTOLO 2 1 2 3 4 5#EDIDDSTOLO 3 0inputs 1-5 use display 2 EDIDall inputs use display 3 EDID#EDIDDSTOBA FunctionThe #EDIDDSTOBA function reads the downstream EDID and stores it to aspecified EDID bank.Syntax:#EDIDDSTOBA param1 param2Parameters:param1 A downstream monitor [1 - 4]param2 EDID bank offset [1 - 5]20
RS-232 SERIAL CONTROL#EDIDBATOLO FunctionThe #EDIDBATOLO function reads the downstream EDID and stores it to anylocal input.Syntax:#EDIDBATOLO param1 param2 [param3...param9]Parameters:param1 EDID bank offset [1 - 5]param2 Input [1 - 10]Notes:If param2 = 0, then the EDID in the specified bank is copied to all eight inputs.#EDIDDETOLO FunctionThe #EDIDDETOLO function stores the Default EDID (640x480) in the specifiedLocal EDID inputs.Syntax:#EDIDDETOLO param1 param2 param3...param9param1 Input [1 - 10]Notes:If param1 = 0, then all 10 <strong>DVI</strong> inputs will be set to the Default EDID.21
Page 1: 10x4 DVI Dual Link MatrixGEF-DVI-10
Page 4 and 5: CONTENTS1 Introduction2 Operation N
Page 6 and 7: OPERATION NOTESREAD THESE NOTES BEF
Page 8 and 9: FRONT PANEL LAYOUTFront Panel123 44
Page 10 and 11: BACK PANEL LAYOUTBack Panel4107 6 5
Page 12 and 13: CONNECTING AND OPERATINGTHE 10X4 DV
Page 18 and 19: IR REMOTE DESCRIPTIONRMT-16416IRRem
Page 20 and 21: IR REMOTE CONFIGURATIONHow to Resol
Page 22 and 23: RS-232 SERIAL CONTROLWhat features
Page 26 and 27: RS-232 SERIAL CONTROL#LOCKEDID Func
Page 28 and 29: RS-232 SERIAL CONTROL#PREDIDST Func
Page 30 and 31: RS-232 SERIAL CONTROL#SNETMASK Func
Page 32 and 33: RS-232 SERIAL CONTROLGeneral Functi
Page 34 and 35: RS-232 SERIAL CONTROL#RMTIRADD Func
Page 36 and 37: RS-232 SERIAL CONTROLM CommandThe M
Page 38 and 39: IP CONTROL - MANAGE EDIDSET INPUT T
Page 40 and 41: IP CONTROL - MANAGE EDIDEDID LOCK S
Page 42 and 43: IP CONTROL - CONFIGURATIONIP CONFIG
Page 44 and 45: FIRMWARE UPDATEFIRMWARE UPDATE PROC
Page 46 and 47: RACK MOUNT SAFETY INFORMATIONa. Max
Page 48 and 49: WARRANTYGefen warrants the equipmen
Page 52: Rev A820600 Nordhoff St., Chatswort

10x4 DVI Dual Link Matrix - Gefen

Create successful ePaper yourself

Delete template?

Save as template?