10x4 DVI Dual Link Matrix - Gefen

More documents

Recommendations

Info

RS-232 SERIAL CONTROLGeneral FunctionsFunction#ACTIVEBOLO#FADEFAULT#LOCKPOWER#MASKOUT#RMTIRADD#STBYMODEDescriptionEnables the boot loaderSet matrix local and routing status to default settingsToggles the lock power stateBlanks selected outputsSet the remote IR channelSets the Matrix to Standby Mode#ACTIVEBOLO FunctionThe #ACTIVEBOLO function enables the boot loader allowing the Matrix to beupdated with firmware using RS-232.Syntax:#ACTIVEBOLOParameters:NoneNotes:The #ACTIVEBOLO command must be typed twice in order to activate the bootloader.#FADEFAULT FunctionThe #FADEFAULT function sets all Local EDIDs and routing settings to default.Syntax:#FADEFAULTParameters:None28
RS-232 SERIAL CONTROL#LOCKPOWER FunctionThe #LOCKPOWER enables/disables the power lock state. Enabling this featurewill store the 5V status for each input prior to shutting the unit down. This preservesthe 5V state when the Matrix is restarted.Syntax:#LOCKPOWER param1Parameters:param1 State [0 - 1]ValueMeaning0 Disable Power Lock1 Enable Power Lock#MASKOUT FunctionThe #MASKOUT function allows blanking or selected outputs.Syntax:#MASKOUT param1 param2Parameters:param1 Output [1 - 4]param2 Output [1 - 4]Notes:The current masking state will be lost if power is lost.29
Page 1: 10x4 DVI Dual Link MatrixGEF-DVI-10
Page 4 and 5: CONTENTS1 Introduction2 Operation N
Page 6 and 7: OPERATION NOTESREAD THESE NOTES BEF
Page 8 and 9: FRONT PANEL LAYOUTFront Panel123 44
Page 10 and 11: BACK PANEL LAYOUTBack Panel4107 6 5
Page 12 and 13: CONNECTING AND OPERATINGTHE 10X4 DV
Page 18 and 19: IR REMOTE DESCRIPTIONRMT-16416IRRem
Page 20 and 21: IR REMOTE CONFIGURATIONHow to Resol
Page 22 and 23: RS-232 SERIAL CONTROLWhat features
Page 24 and 25: RS-232 SERIAL CONTROL#EDIDDSTOLO Fu
Page 26 and 27: RS-232 SERIAL CONTROL#LOCKEDID Func
Page 28 and 29: RS-232 SERIAL CONTROL#PREDIDST Func
Page 30 and 31: RS-232 SERIAL CONTROL#SNETMASK Func
Page 34 and 35: RS-232 SERIAL CONTROL#RMTIRADD Func
Page 36 and 37: RS-232 SERIAL CONTROLM CommandThe M
Page 38 and 39: IP CONTROL - MANAGE EDIDSET INPUT T
Page 40 and 41: IP CONTROL - MANAGE EDIDEDID LOCK S
Page 42 and 43: IP CONTROL - CONFIGURATIONIP CONFIG
Page 44 and 45: FIRMWARE UPDATEFIRMWARE UPDATE PROC
Page 46 and 47: RACK MOUNT SAFETY INFORMATIONa. Max
Page 48 and 49: WARRANTYGefen warrants the equipmen
Page 52: Rev A820600 Nordhoff St., Chatswort

10x4 DVI Dual Link Matrix - Gefen

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?