10x4 DVI Dual Link Matrix - Gefen

More documents

Recommendations

Info

OPERATION NOTESREAD THESE NOTES BEFORE INSTALLING OROPERATING THE GEFENPRO 10X4 DVI DUAL LINK MATRIX• The 10x4 DVI Dual Link Matrix does not support HDCP content.• Make sure that a DVI monitor is powered and connected to one of the DVIoutputs on the 10x4 DVI Dual Link Matrix before applying power. By default,the Local EDID is read from the connected monitor and is copied to all 10DVI inputs once the Matrix has been turned on. If a monitor is not detectedby the Matrix at power-on, a default (internal) EDID of 640x480 will be used.This functionality can be disabled using the Secure Local EDID functionthrough IP control. See page 36 for more information.• There is no internal scaling in the 10x4 DVI Dual Link Matrix. Each monitorattached to the Matrix must be able to display the resolutions output by thesource device(s). For maximum compatibility it is recommended that onlyone common resolution be used by each source device.• Advanced EDID features and IP configuration features are accessiblethrough the RS-232 serial command set.• Routing and EDID features can be accessed using a Web browser using thebuilt-in IP control.• IMPORTANT: If the unit is installed in a closed or multi-rack assembly, donot block the ventilation holes of the enclosure.2
FEATURESFeatures• Increases productivity• Supports 1080p Full HD at 120Hz and dual-link resolutions up to 3840 x2400 (WQUXGA)• Front panel control buttons for local switching• IP Control• Serial RS-232 interface for remote control via a computer or controlautomation devices• Discrete IR remote control• Advanced EDID management permits uploading of custom internal orexternal EDID settings• Supports DDWG standards for DVI• Internal power supply• Output masking command• Standby mode• Energy Star compliant• Grounding pin• IR Sensor• IR Extender• Power On/Off switch• Status LCD (shows routing status)• Rack mountablePackage Includes(1) GefenPRO 10x4 DVI Dual Link Matrix(10) 6-foot DVI cable (M-M)(1) IR remote control unit(1) AC Power Cord(1) User Manual3
Page 1: 10x4 DVI Dual Link MatrixGEF-DVI-10
Page 4 and 5: CONTENTS1 Introduction2 Operation N
Page 8 and 9: FRONT PANEL LAYOUTFront Panel123 44
Page 10 and 11: BACK PANEL LAYOUTBack Panel4107 6 5
Page 12 and 13: CONNECTING AND OPERATINGTHE 10X4 DV
Page 18 and 19: IR REMOTE DESCRIPTIONRMT-16416IRRem
Page 20 and 21: IR REMOTE CONFIGURATIONHow to Resol
Page 22 and 23: RS-232 SERIAL CONTROLWhat features
Page 24 and 25: RS-232 SERIAL CONTROL#EDIDDSTOLO Fu
Page 26 and 27: RS-232 SERIAL CONTROL#LOCKEDID Func
Page 28 and 29: RS-232 SERIAL CONTROL#PREDIDST Func
Page 30 and 31: RS-232 SERIAL CONTROL#SNETMASK Func
Page 32 and 33: RS-232 SERIAL CONTROLGeneral Functi
Page 34 and 35: RS-232 SERIAL CONTROL#RMTIRADD Func
Page 36 and 37: RS-232 SERIAL CONTROLM CommandThe M
Page 38 and 39: IP CONTROL - MANAGE EDIDSET INPUT T
Page 40 and 41: IP CONTROL - MANAGE EDIDEDID LOCK S
Page 42 and 43: IP CONTROL - CONFIGURATIONIP CONFIG
Page 44 and 45: FIRMWARE UPDATEFIRMWARE UPDATE PROC
Page 46 and 47: RACK MOUNT SAFETY INFORMATIONa. Max
Page 48 and 49: WARRANTYGefen warrants the equipmen
Page 52: Rev A820600 Nordhoff St., Chatswort

10x4 DVI Dual Link Matrix - Gefen

Create successful ePaper yourself

Delete template?

Save as template?