Series CHL/CHH - Warden Fluid Dynamics

Catalog M1136Foot Mount InstallationCompact Hydraulic CylindersSeries CHL & CHHInstallation With a KeyKey Included With Cylinder(C Mounting Only)Dimensional TableKey Nominal Dimension Key Groove DimensionBore b x h x l b1 t1 r100.043φ32 12 x 8 x 63 12- 5.00φ40 12 x 8 x 70 12-0.0435.0 0 0.250+0.2φ50 14 x 9 x 80 14- 5.5~0.400.0430φ63 16 x 10 x 100 16- 6.00.043+0.20+0.20+0.20When installing a foot Mount (C Mount)cylinder, refer to the dimensional table forthe correct key and machined groovedimensions.Installation Without a KeyRecommended Key Groove Dimensionb1Front Block(For Retracting)Rear Block(For Extending)r1 r1 t1Block And Key Dimensions Must Be Identical To One AnotherWhen installing a cylinder without a key, besure to place blocks at each end. Bolts alonemay not support the cylinder’s force, whichcould result in damage to the bolts.Lock NutsKKCHBLock NutParts NumberB C H KKLN-20 11/16 0.794 3/8 7/16 – 20 UNFLN-25 3/4 0.866 7/16 1/2 – 20 UNFLN-01 7/8 1.010 31/64 9/16 – 18 UNFLN-02 1-1/8 1.299 41/64 3/4 – 16 UNFLN-03 1-5/16 1.516 3/4 7/8 – 14 UNFLN-04 1-11/16 1.949 31/32 1-1/8 – 12 UNFLN-05 2-1/16 2.382 1-11/64 1-3/8 – 12 UNFLN-06 2-15/16 3.392 1-27/32 1-7/8 – 12 UNFDimensions are in inches.8Miller Fluid PowerDes Plaines, ILToronto, Ontario Canada