APPROVED MATERIALS LIST (AML) - City of West Palm Beach

More documents

Recommendations

Info

Submittal:VALVE BOXES AND ADAPTERS (CONTINUED)UNDERGROUND VALVE IDENTIFICATION (UVI) TAGS:Utilized when the Tyler-style valve box with the Debris Cap is not used, such as with the American Trench Adapter.Dimensions: 3" x 1/4", Brass, with 2-1/2" theft proof “J” rod anchor. Stamped: ¼” to 3/8” capital lettering. Each valvewill have the following minimum information on the tag, words in parentheses are examples of wording to use, Citycode (WPB), valve size (6"), type of valve (RV, BV, PV), type of use (WM, FM), and operation instructions (R-21) right21 turns to open, plus valve number, if applicable. In unpaved areas the UVI will be placed in the concrete collararound valve boxes. In paved areas the UVI will be epoxy mounted adjacent to the valve box or on a nearby concretecurb face.____ WAGCO MARKERVALVE TRENCH ADAPTERS:The American Flow Control trench adapter is to be used on all in ground valves. It is required that the optional CastIron Lid be used and that the valve have embossed on the lid “WATER” for all water applications and “SEWER” for allforce main applications. The UVI tags specifications will also need to be used with the trench adapter.____ AMERICAN FLOW CONTROLModel # 1 - 7NOTE: The following information is supplied to help the supplier to pick the proper model number of the AmericanFlow Control trench adapter. American used the measurements for a trench adapter resting on 7 different sizedAmerican Flow Control RW valves. The supplier will need to compare the valve manufacturer used (if not American)with the American valve to determine the difference in height of Dimension “B” (TABLE 2 on the following page),which is the depth from the trench bottom to where the trench adapter will rest on the valve bonnet.EXAMPLE:If you are utilizing a Mueller 6" valve and Dimension “B” is 14.25 and you were going to have 6' of bury from thebottom of the trench then you would add 14.25" to 72" which would give you 86.25" of bury. So you would need to usea Model # 7 to have the ability to adjust the box.TABLE 1 on this page is based on the valve size and the trench depth. It then refers to the model number to use. Ifyou wish you can use TABLE 3 to figure the minimum length of a trench adapter and your dimension “B” to figure thelength of the model to use.If the minimum length of the No. 1 Valve Trench Adapter is too great or the No. 7 extended out as far as it will go isnot long enough then, revert to using the valve boxes, debris caps and valve stem extension listed after this section.EXAMPLE:If you are installing a 16" American Flow Control Valve and the depth of bury is 36" then the OD of the pipe (17.5)would place the trench depth at 53.5". Dimension “B” for a 16" valve is 41", so the remaining distance is 12.5" and avalve trench adapter would not be usable, since the minimum length for#1 is 18.25".Page 16 of 54 Approved Materials List – Revised November 1, 2011
Submittal:VALVE BOXES AND ADAPTERS (CONTINUED)VALVETRENCH DEPTH AND TRENCH ADAPTER MODEL NUMBER (dimension “B”)SIZE 3'0" 3'6" 4'0" 4'6" 5'0" 5'6" 6'0" 6'6" 7'0" 7'6" 8'0"4" 3 4 4-5 5 5-6 6 6 6 6 7 76" 2 3 4 4-5 5 5-6 6 6 6 6 78" - 2 3-4 4 5 5 6 6 6 6 610" - 1 2 3-4 4 5 5 6 6 6 612" - - 1 3 3-4 4-5 5 5 6 6 614" - - - - - 3 4 5 5 5 616" - - - - - - 3-4 4 5 5 6TABLE 1 (part 1)VALVETRENCH DEPTH AND TRENCH ADAPTER MODEL NUMBERSIZE 8'6" 9'0" 9'6" 10'0" 10'6" 11'0" 11'6" 12'0" 12'6" 13'0"4" 7 7 7 7 7 7 - - - -6" 7 7 7 7 7 7 7 - - -8" 7 7 7 7 7 7 7 7 - -10" 7 7 7 7 7 7 7 7 7 -12" 6 7 7 7 7 7 7 7 7 714" 6 6 6 7 7 7 7 7 7 716" 6 6 6 7 7 7 7 7 7 7TABLE 1 (part 2)VALVE DIMENSION MODEL MINIMUM MAXIMUMSIZE “B” NUMBER LENGTH EXTENSION4" 9.25" # 1 18.25 20.256" 13.50" # 2 22.25 28.258" 18.25" # 3 24.75 32.5010" 23.00" # 4 29.75 40.5012" 27.50" # 5 37.75 56.5014" 36.50" # 6 49.75 80.5016" 41.00" # 7 73.75 128.50TABLE 2 TABLE 3- End of Section -Page 17 of 54 Approved Materials List – Revised November 1, 2011
Page 1 and 2: ENGINEERING SERVICES DEPARTMENTCONS
Page 3: TABLE OF CONTENTSAPPLICABLEITEM PAG
Page 6 and 7: SUBMITTAL GUIDELINES (CONTINUED):7.
Page 8: APPROVED MATERIALS LISTSECTION ONEP
Page 11 and 12: Submittal:DUCTILE IRON LININGS AND
Page 13 and 14: Submittal:DUCTILE IRON FITTINGS (CO
Page 15: Submittal:VALVE BOXES AND ADAPTERSN
Page 19 and 20: Submittal:TAPPING SLEEVES & SADDLES
Page 21 and 22: Submittal:AIR RELEASES:GENERAL:ARV
Page 23 and 24: APPROVED MATERIALS LISTSECTION TWOW
Page 25 and 26: Submittal: 1" WATER SERVICENOTE: Br
Page 27 and 28: Submittal: DUAL WATER SERVICENOTE:
Page 29 and 30: Submittal: EXTENDED & MULTIPLE WATE
Page 31 and 32: Submittal: 3" OR LARGER WATER SERVI
Page 33 and 34: Submittal: 3" OR LARGER WATER SERVI
Page 35 and 36: Submittal: PRIVATE FIRE LINES (CONT
Page 37 and 38: Submittal: PRIVATE FIRE LINES (CONT
Page 39 and 40: Submittal: BACKFLOW PREVENTER(S) (C
Page 41 and 42: APPROVED PRODUCT LISTSECTION THREEG
Page 43 and 44: Submittal: SANITARY GRAVITY SEWER (
Page 45 and 46: APPROVED MATERIALS LISTSECTION FOUR
Page 47 and 48: Submittal: STORMWATER MANAGEMENT ST
Page 49 and 50: Submittal: HARDSCAPE:PEDESTRIAN SUR
Page 51 and 52: APPROVED MATERIALS LISTSECTION EIGH
Page 53 and 54: Submittal: IRRIGATION SYSTEM COMPON

APPROVED MATERIALS LIST (AML) - City of West Palm Beach

Create successful ePaper yourself

Delete template?

Save as template?