ALUCOBOND Verarbeitung - Ravago

ROUTING AND FOLDING TECHNIQUEMACHINES FOR ROUTING AND FOLDING TECHNIQUEFestool panel routing machine PF 1200 E-Plus ALUCOBOND ®Supplied with:--Tracing roller for 4 mm--Cutter disk for V-grooves 90°--Adjustment template--Transport boxHand routing machinesCommercially available hand routing machines with a minimum rating of800 W are suitable. Collet chucks 8 mm dia.Panel routing machine PF 1200 E-PlusMobile dust extractorsE.g. Festool mobile dust extractors, types CTM approved for dust classM for dust with MAK values > 0.1 mg / m³ for sheet milling machines,hand routers and hand-held circular saws.TOOLS FOR ROUTING AND FOLDING TECHNIQUECarbide tipped disk milling cutters for vertical panel sawsWith a nominal panel thickness, the diameters of tracing rollers andcutter discs are adjusted so as to leave a residual core thickness of0.3 mm (V-groove) or 1 mm (rectangular groove). The dimensions givenin the drawings show the cover panel thickness of 0.5 mm plus thecorresponding residual core thickness.For inquiries relating to disc milling cutters with indexable inserts suitablefor processing ALUCOBOND ® plus and AALUCOBOND ® A2 for Holz-Herpanel saws (type PK 1255 ALUCOBOND ® , number of teeth = 8, cutterdisk outer dia. = 244 mm), please contact Reich, Holz-Her or LEUCO.For ordering disk milling cutters with indexable inserts V-groove 90° andV-groove 135° as well as the corresponding tracing rollers for all typesof Striebig panel saws, please contact Striebig AG.When ordering please state type of panel saw and year of construction.Edition 1ALUCOBOND ® Processing and Technical Data GB17