ALUCOBOND Verarbeitung - Ravago

More documents

Recommendations

Info

$(Cenik Trespa plo\232\350 2013.xls) - Ravago$

ROUTING AND FOLDING TECHNIQUECarbide tipped disk milling cutters for vertical panel sawsDisk milling cutter for V-grooves 90° Disk milling cutter for V-grooves 135° Disk milling cutter for rectangular groovesMilling cutters with cylindrical shank for hand routing machinesEnd milling cutter for V-grooves 90°Carbide tipped cutter No. 491 444 (Festool)Carbide tipped cutter No. FV09.01.090 (GIS )Carbide tipped cutter No. 79 803 (KWO)End milling cutter for V-grooves 135°Carbide tipped cutter No. 491 443 (Festool)Carbide tipped cutter No. FV09.01.135 (GIS )Carbide tipped cutter No. 79 804 (KWO)End milling cutter for rectangular groovesHSS cutter Ø 10 mm No. 79800(KWO)HSS cutter Ø 15 mm No. 79801(KWO)18 Edition 1 ALUCOBOND ® Processing and Technical Data GB
ROUTING AND FOLDING TECHNIQUEFabrication of tray panelsDetermination of the measures of periphery and routing measuresThe measures of periphery and the routing measures are determined onrouting measurethe basis of the drawing measures (final measures). In this case, approx.approx.approx.1 mm per edge is deducted from the final measure. 1 mm The total of the 1 mm routingmeasures results in the cutting measure. In any case, final the measure final measuresshould be checked using a test strip prior to series production. Thenthe limit stops of the panel saw can be adjusted to obtain elements ofidentical sizes.Determination of the cutting measureExample ALUCOBOND ® roof edge:Total of routing measures = cutting measure = 1292 mmfinal measurerouting measureapprox.1 mm300 final measure298 routing measurecut off the completemilled grooveapprox.1 mmrouting measurefinal measureapprox.1 mmfinal measurerouting measure800 final measure798 routing measure50 final measure49 routing measureapprox.1 mm50 final measure49 routing measure100 final measure098 routing measurecut off thegroove basepunching upto centre ofmilled grooveV-groove90°For dimensionsrelating to traypanels, pleasesee examples“Suspendedtray panels”Determination of the routing measureAdjustment of punch depth300 final measure298 routing measureAdjustment of the punching depth when punching cornersIn order to obtain perfectly closed tray corners, the machine settingsindicated in the sketch must be observed.800 final measure798 routing measure50 final measure49 routing measure50 final measure49 routing measureFor clean cuts use sharp tools and dies with minimal cutting clearance(~ 0.1 mm).4final measure10routing measure82Bending aids100 final measure098 routing measureFor easy folding of ALUCOBOND ® , particularly in the case of narrowfolds processed according to the routing and folding technique, werecommend bending aids that can be produced of ALUCOBOND ® buttjoint sections and panel strips.--Butt joint section4 mmSection No. 31343--Butt joint section6 mmSection No. 31344Minimum double foldsALUCOBOND ®panel stripEdition 1ALUCOBOND ® Processing and Technical Data GB19
Page 1: PROCESSING AND TECHNICAL DATASimply
Page 4 and 5: TRANSPORTATION, STORAGE1.00 m- 1.20
Page 6 and 7: PANEL INSTALLATIONProtective film w
Page 8: INFORMATION ON SPECIAL SURFACESMill
Page 11 and 12: PROCESSING METHODS--speed 2,400 rpm
Page 13 and 14: PROCESSING METHODSdie for single pu
Page 15 and 16: ROUTING AND FOLDING TECHNIQUEGenera
Page 17: ROUTING AND FOLDING TECHNIQUEMACHIN
Page 21 and 22: ROUTING AND FOLDING TECHNIQUEFabric
Page 23 and 24: ROUTING AND FOLDING TECHNIQUE(4) Ro
Page 25 and 26: JOINTING / FIXING TECHNIQUE--The to
Page 27 and 28: JOINTING / FIXING TECHNIQUETHREADED
Page 29 and 30: adhesive Sika Tack-Panel orMBE-Pane
Page 31 and 32: JOINTING / FIXING TECHNIQUEFaçade,
Page 33 and 34: CLEANING AND MAINTENANCECLEANING AN
Page 35 and 36: FACADE - STANDARD DESIGNSTray panel
Page 37 and 38: TECHNICAL DATA SHEETALUCOBOND ®Thi
Page 39 and 40: TECHNICAL DATA SHEETALUCOBOND ® A2
Page 41 and 42: Internet addressesSealing tapeswww.
Page 43 and 44: Create the differenceVERSATILE ON P
Page 46: Create the difference.3A Composites

ALUCOBOND Verarbeitung - Ravago

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?