ALUCOBOND Verarbeitung - Ravago

More documents

Recommendations

Info

$(Cenik Trespa plo\232\350 2013.xls) - Ravago$

JOINTING / FIXING TECHNIQUEScrewing on wooden substructuresCommercially available fascia screws made of stainless steel are used.The screws must be suitable for the wooden substructure (please notethe information given by the manufacturer). The substructure mustbe pre-drilled. Bore holes in the wooden substructure must be drilledcentrically to the bore holes in the panel using a drilling jig.144,8 4.8The screws should be tightened such that the screw head sits on thepanel without exerting any torque or pressure on it (preferably using acordless screwdriver). With wooden substructures, particular attentionshould be paid to the material’s softness.3Pan head38Planed, glued, laminated timber should be used for the substructure. Theentire surface of the wood must be covered with a non-compressiblesealing strip.(4)≥ 15 ≥ 15 10(2)(3)(1)(1) ALUCOBOND ® , (2) Fascia screw 4.8 x 38 – K14, (3) Aluminium sealing strip orEPDM sealing strip, (4) Glued laminated timber, min. 40 x 80 mmGluingMetal adhesives / universal adhesives, tapes, Velcro tapesFor indoor use, trade fair/exhibition stand structures, mechanical engineering,etc. commercially available metal/universal adhesives or double-sidedadhesive tapes are used according to the particular application.So-called Velcro tapes are available for detachable joints, e.g. SCOTCHMATE or Dual Lock (3M).Please note:--Adhesives or structural sealants do not adhere to the ALUCOBOND ® core.--All-over lamination of ALUCOBOND ® panels (one side) to other materialsmay result in the deformation of the laminates (differing expansion/bimetal effect).--As with mechanical fastening, special care is required when processingor installing high-gloss and/or dark surfaces.--Regarding the application and use of adhesives/tapes, please observethe manufacturers’ instructions and regulations.--Training has to be carried out in accordance with the building supervisionapprovals of the adhesives manufacturers.28 Edition 1 ALUCOBOND ® Processing and Technical Data GB
adhesive Sika Tack-Panel orMBE-Panel-locadhesive tape Sika Tack-Panel orMBE-Panel-loc10Fixation of ALUCOBOND ® by means of gluingThe fixation of ALUCOBOND ® façade panels using structural sealantsis approved by the building authorities:supporting sectionvertical panel jointsadhesive Sika Tack-Panel orMBE-Panel-locadhesive tape Sika Tack-Panel orMBE-Panel-loc1033JOINTING / FIXING TECHNIQUE8 12 12min. 90/100 mmsupporting sectionpanel area8 12 1212min. 90/100 mm40Bonding ALUCOBOND ® to stiffeners--The fixation of stiffeners using adhesives enables the fabrication oftray panels in larger sizes.--For mounting façade cladding, the gluing must not be applied as thesole means of fixation.supporting sectionpanel area--Forces acting on the stiffener must be conducted to the substructurein an appropriate way.--If the adhesive should fail, it must be ensured that nobody is endangeredby any falling façade elements.--When positioning the stiffeners horizontally, the adhesive must beprotected against standing water.--For bonding mill-finished aluminium stiffeners to bright-rolled and12primed reverse sides of ALUCOBOND ® panels, 3A Composites GmbH40recommends using permanently elastic, structural sealants or doublesided,adhesive tapes.--The use of OMEGA sections is recommended.--For the products Sika Tack Panel of Sika Chemie, MBE Panel-loc ofMBE GmbH and 3M VHB Structural Cladding Tape W20F, bonding toALUCOBOND ® has been approved, thereby taking the correspondingprocessing instructions into consideration.Edition 1ALUCOBOND ® Processing and Technical Data GB29
Page 1: PROCESSING AND TECHNICAL DATASimply
Page 4 and 5: TRANSPORTATION, STORAGE1.00 m- 1.20
Page 6 and 7: PANEL INSTALLATIONProtective film w
Page 8: INFORMATION ON SPECIAL SURFACESMill
Page 11 and 12: PROCESSING METHODS--speed 2,400 rpm
Page 13 and 14: PROCESSING METHODSdie for single pu
Page 15 and 16: ROUTING AND FOLDING TECHNIQUEGenera
Page 17 and 18: ROUTING AND FOLDING TECHNIQUEMACHIN
Page 19 and 20: ROUTING AND FOLDING TECHNIQUEFabric
Page 21 and 22: ROUTING AND FOLDING TECHNIQUEFabric
Page 23 and 24: ROUTING AND FOLDING TECHNIQUE(4) Ro
Page 25 and 26: JOINTING / FIXING TECHNIQUE--The to
Page 27: JOINTING / FIXING TECHNIQUETHREADED
Page 31 and 32: JOINTING / FIXING TECHNIQUEFaçade,
Page 33 and 34: CLEANING AND MAINTENANCECLEANING AN
Page 35 and 36: FACADE - STANDARD DESIGNSTray panel
Page 37 and 38: TECHNICAL DATA SHEETALUCOBOND ®Thi
Page 39 and 40: TECHNICAL DATA SHEETALUCOBOND ® A2
Page 41 and 42: Internet addressesSealing tapeswww.
Page 43 and 44: Create the differenceVERSATILE ON P
Page 46: Create the difference.3A Composites

ALUCOBOND Verarbeitung - Ravago

Create successful ePaper yourself

Delete template?

Save as template?