Terminal Junction Box - Pepperl + Fuchs
Terminal Junction Box - Pepperl + Fuchs
Terminal Junction Box - Pepperl + Fuchs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 2 3 4 5 6 7 8Master document<strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>(for further information, refer also to the manual)PuF_Cover_TJB_FXL_SL_XL_Master<strong>Pepperl</strong>+<strong>Fuchs</strong> referencesDescriptionTypeVoltage max.Current max.<strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>SLS4xx.T-Cxxxxdepending on terminal typedepending on CSA(see table on page 7)Marking depending on usage:for Zone 0 in Gas atmosphere (Ex i)for Zone 1 in Gas atmosphere (Ex e)for Zone 21 in Dust atmosphereII 1 G Ex ia IIC T6 GaII 1 G Ex ia IIC T5 GaII 2 G Ex e IIC T6 GbII 2 G Ex e IIC T5 GbII 2 D Ex tb IIIC T80°C DbII 2 D Ex tb IIIC T95°C DbMaterial Stainless Steel 316L (1.4404)FinishelectropolishedGasket material (only enclosure!) NeopreneIngress protection (acc. EN 60529) IP66Dimensions (WxHxD)150 x 150 x 90mmGross weight (only enclosure!)1,9kgEC type-examination certificateMin. ambient temperatureMax. ambient temperatureSIRA 99 ATEX 3199-30°C+40°C (T6/T80°C: max. surface temp. Gas/Dust)+55°C (T5/T95°C: max. surface temp. Gas/Dust)Form: PuF_MASTER_04xThis document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale noneCover sheetDrawn DC.MKOApproved DC.CL13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJDocument-No.04-CLC8RevisionASheet 1 of 7
1 2 3 4 5 6 7 8Index - Technical documentationRevisionDocument Sheet Description Date IDX Date IDX Date IDX Date IDX Date04-CLC8 1 Cover sheet13.03.2013 A04-CLC8 2 Index sheet13.03.2013 A04-CLC8 3 BoM with certifications (ATEX)13.03.2013 A04-CLC8 4 BoM with torques13.03.2013 A04-CLC8 5 Dimensions, cable entries and labelling13.03.2013 A04-CLC804-CLC86 Maximum entry capacity13.03.20137 Internal assembling13.03.2013AAPuF_STD_INDEX_SHEETForm: PuF_MASTER_04xThis document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale none13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJIndex sheetDrawn DC.MKOApproved DC.CLDocument-No.04-CLC8RevisionASheet 2 of 7
1 2 3 4 5 6 7 8BoM with certificationsPosComponent name Type Manufacturer Mat. Umax Imax Tmin Tmax IP(V) (A) (°C) (°C) GradeApproval-No.1 Ex-e Stainless steel enclosure SLSxx SLSxx PEPPERL+FUCHS SS 316L -40 85 IP66 0,1,2,21,22 II 1 G / II 2 G / II 2 Ex D e IIC, Ex tb IIIC SIRA00 ATEX 3027U2 Ex-e-plastic cable gland bk M12 to M50 ESKE-e M12-M50 PA WISKA PA -40 75 IP66/68 1,2,21,22 II 2 G / II 2 D Ex e II, Ex tDPTB 05 ATEX 1068X3 Ex-i-plastic cable gland bu M12 to M50 ESKE-i M12-M50 PA WISKA PA -40 75 IP66/68 1,2,21,22 II 2 G / II 2 D Ex e II, Ex tDPTB 05 ATEX 1068X4 Ex e Stop end M12-M50 EX-EVSG M12-M50 PA WISKA PA -40 75 IP66/68 1,2,21,22 II 2 G / II 2 D Ex e II, Ex tDPTB 06 ATEX 1032X5 Ex-e/d Metal cable gland ADE1F M12 to M50 ADE1F M12-M50 nickel plated CAPRI CUZN/Ni -30 80 IP66/68 1,2,21,22 II 2 G / II 2 D Ex e II, Ex d IIC, Ex tD LCIE97 ATEX6008X6 Ex-e/d Metal cable gland ADE1F M12 to M50 ADE1F M12-M50 SS CAPRI SS 316L -30 80 IP66/68 1,2,21,22 II 2 G / II 2 D Ex e II, Ex d IIC, Ex tD LCIE97 ATEX6008X7 Ex-e/d Metal cable gland ADE4F M12 to M50 ADE4F M12-M50 nickel plated CAPRI CUZN/Ni -30 80 IP66/68 1,2,21,22 II 2 G / II 2 D Ex e II, Ex d IIC, Ex tD LCIE97 ATEX6008X8 Ex-e/d Metal cable gland ADE4F M12 to M50 ADE4F M12-M50 SS CAPRI SS 316L -30 80 IP66/68 1,2,21,22 II 2 G / II 2 D Ex e II, Ex d IIC, Ex tD LCIE97 ATEX6008X9 Ex-e/d Metal stop end M16-M50(Mushroom) EX-PM01-06 CUZN/Ni PEPPERL+FUCHS CUZN/Ni -60 160 IP66 1,2,21,22 II 2 G / II 2 D Ex e IIC, Ex d IIC, Ex tb IIIC SIRA 04 ATEX 1365 U10 Ex-e/d Metal stop end M16-M50(Hex head) EX-PH01-06 CUZN/Ni PEPPERL+FUCHS CUZN/Ni -60 160 IP66 1,2,21,22 II 2 G / II 2 D Ex e IIC, Ex d IIC, Ex tb IIIC SIRA 04 ATEX 1365 U11 Ex-e/d Metal stop end M16-M50(Mushroom) EX-PM01-06 SS316L PEPPERL+FUCHS SS 316L -60 160 IP66 1,2,21,22 II 2 G / II 2 D Ex e IIC, Ex d IIC, Ex tb IIIC SIRA 04 ATEX 1365 U12 Ex-e/d Metal stop end M16-M50(Hex head) EX-PH01-06 SS316L PEPPERL+FUCHS SS 316L -60 160 IP66 1,2,21,22 II 2 G / II 2 D Ex e IIC, Ex d IIC, Ex tb IIIC SIRA 04 ATEX 1365 U13 Ex-e-Screw terminal UT 2,5-16 UT 2,5-16 PHOENIX CONTACT PA 690V t.b.i. -50 110 IP20 II 2 G / II 2 D KEMA04 ATEX 2048U14 Ex-e-spring cage terminal block ST 2,5-16 ST 2,5-16 PHOENIX CONTACT PA 550V t.b.i. -50 110 IP20 II 2 G / II 2 D KEMA00 ATEX 2052U15 Ex-e-Feed-through terminal WDU 2,5-16 WDU 2,5-16 WEIDMUELLER PA 690V t.b.i. -50 120 IP20 II 2 G / II 2 D Ex e IIKEMA98 ATEX 1683U16 Ex-e-Feed-through terminal ZDU 2,5-16 ZDU 2,5-16 WEIDMUELLER PA 550V t.b.i. -50 120 IP20 II 2 G / II 2 D Ex e IIKEMA97 ATEX 2521U17 PE-Screw terminal UT 2,5-16-PE UT 2,5-16-PE PHOENIX CONTACT PA N.A. -50 110 IP20 II 2 G / II 2 D KEMA04 ATEX 2048U18 PE-spring cage terminal block ST 2,5-16-PE ST 2,5-16-PE PHOENIX CONTACT PA N.A. -50 110 IP20 II 2 G / II 2 D KEMA00 ATEX 2052U19 PE-Feed-through terminal WPE 2,5-16 WPE 2,5-16 WEIDMUELLER PA N.A. -50 120 IP20 II 2 G / II 2 D Ex e IIKEMA98 ATEX 1683U20 PE-Feed-through terminal ZPE 2,5-16 ZPE 2,5-16 WEIDMUELLER PA N.A. -50 120 IP20 II 2 G / II 2 D Ex e IIKEMA97 ATEX 2521UZoneGroup,categoryType ofprotectionPuF_MASTER_BoM_ATEX_CertForm: PuF_MASTER_04xThis document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale noneBoM with certifications (ATEX)Drawn DC.MKOApproved DC.CL13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJDocument-No.04-CLC8RevisionASheet 3 of 7
1 2 3 4 5 6 7 8BoM with torquesPos Item Part-No. Qu. Component nameType ManufacturerTorque 1 Torque 2(Nm) (Nm)1 00ENC-M001 M000 1 Ex-e Stainless steel enclosure SLSxxSLSxxPEPPERL+FUCHS 2,0 N.A. N.A.2 02GLD-M001 M001 1 Ex-e-plastic cable gland bk M12 to M50ESKE-e M12-M50 PA WISKAt.b.i. t.b.i. N.A.3 02GLD-M002 M002 1 Ex-i-plastic cable gland bu M12 to M50ESKE-i M12-M50 PAWISKAt.b.i. t.b.i. N.A.4 02GLD-M003 M003 1 Ex e Stop end M12-M50EX-EVSG M12-M50 PA WISKAt.b.i. t.b.i. N.A.5 02GLD-M005 M005 1 Ex-e/d Metal cable gland ADE1F M12 to M50ADE1F M12-M50 nickel plated CAPRIt.b.i. t.b.i. N.A.6 02GLD-M006 M006 1 Ex-e/d Metal cable gland ADE1F M12 to M50ADE1F M12-M50 SSCAPRIt.b.i. t.b.i. N.A.7 02GLD-M007 M007 1 Ex-e/d Metal cable gland ADE4F M12 to M50ADE4F M12-M50 nickel plated CAPRIt.b.i. t.b.i. N.A.8 02GLD-M008 M008 1 Ex-e/d Metal cable gland ADE4F M12 to M50ADE4F M12-M50 SSCAPRIt.b.i. t.b.i. N.A.9 02GLD-M010 M010 1 Ex-e/d Metal stop end M16-M50(Mushroom)EX-PM01-06 CUZN/Ni PEPPERL+FUCHS t.b.i. t.b.i. N.A.10 02GLD-M011 M011 1 Ex-e/d Metal stop end M16-M50(Hex head)EX-PH01-06 CUZN/Ni PEPPERL+FUCHS t.b.i. t.b.i. N.A.11 02GLD-M015 M015 1 Ex-e/d Metal stop end M16-M50(Mushroom)EX-PM01-06 SS316LPEPPERL+FUCHS t.b.i. t.b.i. N.A.12 02GLD-M016 M016 1 Ex-e/d Metal stop end M16-M50(Hex head)EX-PH01-06 SS316LPEPPERL+FUCHS t.b.i. t.b.i. N.A.13 05TER-M100 M100 1 Ex-e-Screw terminal UT 2,5-16UT 2,5-16PHOENIX CONTACT t.b.i. N.A N.A.14 05TER-M101 M101 1 Ex-e-spring cage terminal block ST 2,5-16ST 2,5-16PHOENIX CONTACT N.A. N.A N.A.15 05TER-M102 M102 1 Ex-e-Feed-through terminal WDU 2,5-16WDU 2,5-16WEIDMUELLER t.b.i. N.A. N.A.16 05TER-M103 M103 1 Ex-e-Feed-through terminal ZDU 2,5-16ZDU 2,5-16WEIDMUELLER N.A. N.A. N.A.17 05TER-M104 M104 1 PE-Screw terminal UT 2,5-16-PEUT 2,5-16-PEPHOENIX CONTACT t.b.i. N.A N.A.18 05TER-M105 M105 1 PE-spring cage terminal block ST 2,5-16-PEST 2,5-16-PEPHOENIX CONTACT N.A. N.A N.A.19 05TER-M106 M106 1 PE-Feed-through terminal WPE 2,5-16WPE 2,5-16WEIDMUELLER t.b.i. N.A. N.A.20 05TER-M107 M107 1 PE-Feed-through terminal ZPE 2,5-16ZPE 2,5-16WEIDMUELLER N.A. N.A. N.A.Torque 3(Nm)Special conditionsPuF_STD_BoM_TorqForm: PuF_MASTER_04xThis document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale 1:2BoM with torquesDrawn DC.MKOApproved DC.CL13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJDocument-No.04-CLC8RevisionASheet 4 of 7
1 2 3 4 5 6 7 8TOP VIEWMounting detailsView without lid!SIDE VIEW LEFT* Ex i label(if required)TOP (A)* Tag label(if required)SIDE VIEW RIGHTEx i labelRIGHT (D)LEFT (C)Tag labelType labelBOTTOM (B)WallmountingbracketInternal / externalearth stud M6 brassBOTTOM VIEWM6 hexagon head screwdrilling grid* Tag label Material:* Ex i label Material:Form: PuF_MASTER_04xengraved Traffolyte (white surface, black letters); 60x30mm; selfadhesive (optional screwed)or: laser engraved Stainless Steel; 60x30mm; screwedengraved Traffolyte (blue surface, white letters); 60x30mm; selfadhesive, "CONTAINS INTRINSICALLY SAVE CIRCUITS"This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale 1:2Dimensions, cable entries and labellingDrawn DC.MKOApproved DC.CL13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJDocument-No.04-CLC8RevisionASheet 5 of 7
1 2 3 4 5 6 7 8Form: PuF_MASTER_04xThis document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale noneMaximum entry capacityDrawn DC.MKOApproved DC.CL13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJDocument-No.04-CLC8RevisionASheet 6 of 7
1 2 3 4 5 6 7 8Rail identification &terminal arrangement areaAssembled with 1 railEnd stop(opt. marker -Xn)End stopDIN rail identifierH1DIN rail TS35<strong>Terminal</strong> #1<strong>Terminal</strong> #n(with end plate!)Form: PuF_MASTER_04xThis document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale 1:2Internal assemblingDrawn DC.MKOApproved DC.CL13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJDocument-No.04-CLC8RevisionASheet 7 of 7
1 2 3 4 5 6 7 8Index - Technical documentationRevisionDocument Sheet Description Date IDX Date IDX Date IDX Date IDX Date04-CLC8 1 Index sheet appendix13.03.2013 A04-CLC8 2 Add. manufacturing informationsDimensions and ex relevant distances13.03.2013 A04-CLC8 3 Add. manufacturing informationsDimensions and ex relevant distances13.03.2013 A04-CLC8 4 Add. manufacturing informationsDrilling grid side A13.03.2013 A04-CLC8 5 Add. manufacturing informationsDrilling grid side B13.03.2013 A04-CLC804-CLC86 Add. manufacturing informationsDrilling grid side C13.03.20137 Add. manufacturing informationsDrilling grid side D13.03.2013AAPuF_STD_INDEX_SHEET_APPENDIXThis document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale noneIndex sheet appendixDrawn DC.MKOApproved DC.CLForm: PuF_MASTER_04x 13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJ Appendix 1 of 7Document-No.04-CLC8RevisionA
1 2 3 4 5 6 7 8Ex i label(if required)LabellingRail identification &terminal arrangement areaAssembled with 1 railEx i labelDrillings for fixingTag label (if required)H1Type labelTag labelassembling acc.drawing no. T07-BE45_ENUTST WDU ZDUTag labelSECTIONAL BOTTOM VIEWSECTIONAL LEFT SIDE VIEWUTSTWDU ZDUNote:For final <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong> and detailed entry location layoutplease refer also to the corresponding CRD-File!Ex - relevant dimensions are marked :This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!Only valid as long as released in EDM or with a valid production documentation!Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Add. manufacturing informationsDimensions and ex relevant distancesForm: PuF_MASTER_04x 13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJCONFIDENTIALacc. to DIN ISO 16016 DIN ISO 2768-cKDateDrawnApproved13.03.2013 ScaleDC.MKODC.CLTolerances acc.1:2Document-No.04-CLC8Appendix2ofFormatA3RevisionA7
1 2 3 4 5 6 7 8Ex - relevant dimensions are marked :This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale noneAdd. manufacturing informationsDimensions and ex relevant distancesDrawn DC.MKOApproved DC.CLForm: PuF_MASTER_04x 13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJ AppendixDocument-No.04-CLC8RevisionA3 of 7
1 2 3 4 5 6 7 8Drilling grid side A(ø40,2)(ø32,2)(ø25,2)(ø20,2)(ø16,2)(ø12,2)(ø12,2)(ø16,2)(ø20,2)(ø25,2)(ø32,2)(ø40,2)clearance holesoverview of drill sizes and minimum distances see document 07-BV46This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale 1:1Add. manufacturing informationsDrilling grid side ADrawn DC.MKOApproved DC.CLForm: PuF_MASTER_04x 13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJ AppendixDocument-No.04-CLC8RevisionA4 of 7
1 2 3 4 5 6 7 8Drilling grid side B(ø40,2)(ø32,2)(ø25,2)(ø20,2)(ø16,2)(ø12,2)(ø12,2)(ø16,2)(ø20,2)(ø25,2)(ø32,2)(ø40,2)clearance holesoverview of drill sizes and minimum distances see document 07-BV46This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale 1:1Add. manufacturing informationsDrilling grid side BDrawn DC.MKOApproved DC.CLForm: PuF_MASTER_04x 13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJ AppendixDocument-No.04-CLC8RevisionA5 of 7
1 2 3 4 5 6 7 8Drilling grid side C(ø40,2)(ø32,2)(ø25,2)(ø20,2)(ø16,2)(ø12,2)(ø12,2)(ø16,2)(ø20,2)(ø25,2)(ø32,2)(ø40,2)clearance holesoverview of drill sizes and minimum distances see document 07-BV46This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale 1:1Add. manufacturing informationsDrilling grid side CDrawn DC.MKOApproved DC.CLForm: PuF_MASTER_04x 13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJ AppendixDocument-No.04-CLC8RevisionA6 of 7
1 2 3 4 5 6 7 8Drilling grid side D(ø40,2)(ø32,2)(ø25,2)(ø20,2)(ø16,2)(ø12,2)(ø12,2)(ø16,2)(ø20,2)(ø25,2)(ø32,2)(ø40,2)clearance holesoverview of drill sizes and minimum distances see document 07-BV46This document contains safety-relevant information. It must not be altered without the authorization of the norm expert!CONFIDENTIAL Tolerances acc. FormatOnly valid as long as released in EDM or with a valid production documentation!acc. to DIN ISO 16016 DIN ISO 2768-cK A3Title SL4 Masterdrawing <strong>Terminal</strong> <strong>Junction</strong> <strong>Box</strong>Date 13.03.2013 Scale 1:1Add. manufacturing informationsDrilling grid side DDrawn DC.MKOApproved DC.CLForm: PuF_MASTER_04x 13.09.12 File: 04CLC8A printed: 13.03.2013Rev. Date NameBÜHL / BADENNorm DC.FU/SJ AppendixDocument-No.04-CLC8RevisionA7 of 7
Change language