compact rail

More documents

Recommendations

Info

63 SERIESThe deformations given in the diagrams refer to sliders with three rollers and K1 preload.These values are reduced by 25% in case of K2 preload.- Radial loadNTE/NUE63CSW63Not supported flangeNTE/NUE63CSW63Supported flangeA44 U46Cat. 41-41bE
- Axial loadNTE63CSW63- Mx momentNTE63CSW63When the slider supports a momentMx, higher stiffness is obtained byplacing the slider with the rollerspositioned as indicated in the picture.The diagrams refer to this orientation.Cat. 41-41bEA45
Page 6 and 7: INDEXRAIL MOUNTING DIMENSIONS......
Page 9 and 10: SILENT OPERATION LEVELWith today’
Page 11 and 12: RAILSThree different type rails - e
Page 13 and 14: SLIDERS- N... SERIES18 SERIESSlider
Page 17 and 18: RAILS28 SERIESRail weight:1000 g/mH
Page 21 and 22: RAILS43 SERIESRail weight:2600 g/mW
Page 23 and 24: 43 SERIESThe sliders of N.43L serie
Page 25 and 26: RAILS63 SERIESRail weight:6000 g/mW
Page 27 and 28: CPA / CPN ROLLERSROLLERSThe CPA is
Page 29 and 30: TORX ® HEAD SCREWSCHARACTERISTICSF
Page 31 and 32: POSSIBILITIES IN SLIDER MOUNTINGCOM
Page 37 and 38: In order to obtain the best results
Page 39 and 40: (5) The lower side of the rail must
Page 41 and 42: LINEAR PRECISIONRUNNING PARALLELISM
Page 43 and 44: LIFETIMELIFE CALCULATIONThe dynamic
Page 45: - Axial loadNT/CSW18NTE/CSW28NTE/CS
Page 49 and 50: RAIL MOUNTING DIMENSIONSCertain min
Page 51 and 52: 18 SIZE SLIDERSCoefficient of frict
Page 53 and 54: - Rail mounting without any support
Page 55 and 56: MOUNTING OF “T+U” SYSTEMThe mou
Page 57 and 58: (4) Fix the U.. rail, following the
Page 59 and 60: VERTICAL MOVEMENTSTATIC VERIFICATIO
Page 61 and 62: SELECTION FLOW-CHARTThe following f
Page 63 and 64: EXAMPLES OF APPLICATION3 AXES PALLE
Page 65 and 66: PLASMA CUTTING MACHINEThis machine
Page 67 and 68: EXPOSURE UNITIn the photographic ap
Page 69 and 70: INSERTOUNILINE
Page 71 and 72: INDEXUNILINE - THE ONLY CHOICE.....
Page 73 and 74: UNILINE - THE ONLY CHOICEUNILINE is
Page 75 and 76: “A” FAMILY:Set-screwsMoving tro
Page 77 and 78: WHICH ACTUATOR TO CHOOSE(PERFORMANC
Page 79 and 80: A407.5 1542.5 8091.5 165 Stroke91.5
Page 81 and 82: C55108 200 Stroke108Trolley length(
Page 83 and 84: A75116 285 Stroke116Trolley length(
Page 85 and 86: E75116 285 Stroke116* Position of t
Page 87 and 88: VERSION “L” (Long trolley)“L
Page 89 and 90: VERSION “H”The H units are “s
Page 91 and 92: LIFETIMELIFE CALCULATIONThe dynamic
Page 93 and 94: MOUNTING CONFIGURATIONSAND INSTRUCT
Page 95 and 96: 2 AXIS GANTRY (Y-2Z and 2Y-Z)In the
Page 97 and 98:
3 AXIS GANTRY (2X-Y-Z)This example
Page 99 and 100:
BELT TENSIONINGThe UNILINE linear u
Page 101 and 102:
MOUNTING ACCESSORIESMETRIC INTERFAC
Page 103 and 104:
“T” PLATEThis plate allows two
Page 105 and 106:
OTHER USEFUL INFORMATIONRUNNING PAR
Page 107 and 108:
The linear slide inside the actuato
Page 109 and 110:
NotesThe linear actuator is supplie
Page 111 and 112:
4545Special versionsSpecial version
Page 113 and 114:
INSERTOTELESCOPIC RAIL
Page 115 and 116:
INDEXTELESCOPIC RAIL: BEARINGS THAT
Page 117 and 118:
PRODUCT OVERVIEWAll of the rails in
Page 119 and 120:
WHAT MAKES ROLLON’S TELESCOPICRAI
Page 121 and 122:
ELECTROMEDICAL BEDASNLTF44MACHINE T
Page 123 and 124:
- Single direction stroke (version
Page 125 and 126:
TECHNICAL DATA:DLCALtotBStrokeTypeL
Page 127 and 128:
end-stop screwWeight DE22: 2.5 kg/m
Page 129 and 130:
end-stop screwWeight DBN22: 2.5 kg/
Page 131 and 132:
ASN SERIESThis slide is formed by a
Page 133 and 134:
Order code:ASN 63 - 770 - 433Series
Page 135 and 136:
TECHNICAL DATA:length Lstroke Hleft
Page 137 and 138:
VERIFICATION OF STATIC LOADAs you c
Page 139 and 140:
INSERTOEASY RAIL
Page 141 and 142:
INDEXEASY RAIL: THE SOLUTION IS EAS
Page 143 and 144:
EXAMPLES OF LOAD CAPACITIES63432211
Page 145 and 146:
MOUNTING EXAMPLESWith regard to the
Page 147 and 148:
• “SN35” SERIES15.8M610R2Coun
Page 149 and 150:
SN63 SERIESSN43 SERIESCat. 41-41bED
Page 151 and 152:
LIFETIME CALCULATIONThe life of a l
Page 153 and 154:
INSERTOECOLINE
Page 155 and 156:
INDEXECOLINE: AFFORDABLE AND INNOVA
Page 157 and 158:
TECHNICAL DATA AND ORDER CODESRails
Page 159 and 160:
SETTING SLIDER PRELOAD ANDROLLER OR
Page 161 and 162:
- “XM37” WITH SINGLE SLIDER “
Page 163 and 164:
INSERTOX RAIL
Page 165 and 166:
INDEXTEX - CEX SERIES..............
Page 167 and 168:
MOUNTED RAIL / SLIDERBeccentric rol
Page 169 and 170:
ROLLERSCRPACRPNBFG (eccentricity)BD
Page 171 and 172:
INSERTOCURVILINE
Page 173 and 174:
INDEXCURVILINE: THE RAIL THAT GOES
Page 175 and 176:
APPLICATION EXAMPLES:VARIABLE RADIU
Page 177 and 178:
MOUNTED RAIL / SLIDER(Constant Radi
Page 179 and 180:
Branches:Via Trieste 26, 20059 Vime
show all

compact rail

Create successful ePaper yourself

Delete template?

Save as template?