<strong>Tools</strong> for dressing <strong>and</strong> profiling grinding toolsCleaning stonesContinued next pageCleaning stonesstone No. 2Application: for diamond <strong>and</strong> boron nitride grinding wheels.Minimum order qty.: 3 piecesDimensions mm 100 x 20 x 1060596 Ident. No. 020Unit price E O. R.Prod. Gr. 692Continued next pageDIAPOINT single diamond wheel dressersfor all machines with compatible mountingSelection tip: we recommend that the graphic below is consulted for the selection of the correct diamondweight for single diamond dressing tools in respect of the grinding wheel to be dressed.Application hints DIAPOINT:Application: for all ceramic grinding wheelsChucking: angle of the dressing tool to the middle of the grinding wheel between 5° <strong>and</strong> 15°feed: 0.01-0.03 mm/passageLateral feed: on average 0.05-0.15 mm/UCooling: a large degree of cooling is requiredN.B.: if the sharpness decreases, revolve the dressing tool approx. 60° about its own axis. In good time,the blunt surface should be no greater than approx. 0.5 mm².Holders for the manual dressing of s<strong>and</strong>ing disks, e. g. on floor st<strong>and</strong> grinders without dressing equipment,or for the dressing of s<strong>and</strong>ing disks on grinding attachments for lathes see No. 61220 page 1393.No. 61124 2-4 natural points (quality 3)No. 61135 3-5 natural points, hardly any impurities (quality 2)Shank MT 0 DIN 228-1 MT 1 DIN 228-1 Cylindrical, solid<strong>Diamond</strong> weight Carat 0,40 0,50 0,70 1,00 0,50 0,70 1,00 0,40 0,50 0,70Ident. No. 040 050 070 100 350 370 400 640 650 67061124 Unit price E – O. R. (O. R.) (O. R.) O. R. – O. R. – (O. R.) –61135 Unit price E O. R. O. R. O. R. O. R. O. R. O. R. – (O. R.) (O. R.) (O. R.)* While placing order please specify Ø <strong>and</strong> length of shank.h Other qualities available on request.30028026024022020018016014012010080604020mmWidth of the grinding wheel0,350,150,500,250,750,35<strong>Diamond</strong> weight in carats1,501,00 1,250,700,50 0,601,750,852,001,00New diamondWorn diamond0 100 200 300 400 500 600 700 800 900 1000 1100 1200Outer diameter of the grinding wheelmmProd. Gr. 610Continued next pageDIAROND multi-grain dressersfor dressing straight grinding wheelsSt<strong>and</strong>ard dressing tool for machines with a suitable mountingApplication hints: DIAROND:Application: for all ceramic grinding wheels; a more hard-wearing dressing tool bond R is available onrequest for particularly aggressive, harder abrasive compounds.Chucking: vertical to the spindle axisfeed: 0.01-0.03 mm/passageLateral feed: 0.3-0.5 mm/UCooling: a large degree of cooling is requiredN.B.: using for the first time, it is recommended that several strokes are effected at an increased rate offeed.Holders for dressing tools with shank MK 1 for manual dressing or for grinding wheels on grinding attachmentsfor lathes see No. 61220 page 1393.Size (= Ø mm) mm 8 11Shank MT 0(DIN 228-1)MT 1(DIN 228-1)cylindricald = 12 mmMT 1(DIN 228-1)<strong>Diamond</strong> weight Carat 2,2 2,2 2,2 4,2Suitable for dressing s<strong>and</strong>ing disks Ø mm 150 - 400 150 - 400 150 - 400 400 - 600Width mm 20 - 80 20 - 80 20 - 80 Up to 300Grinding wheel grain size 46 -120 46 -120 46 -120 46 -12061200 Ident. No. 080 081 085 111Unit price E O. R. O. R. O. R. O. R.Øacc. to DIN 1820acc. to DIN 182065D10Prod. Gr. 6111392 2011/12
<strong>Tools</strong> for dressing <strong>and</strong> profiling grinding toolsGrinding wheel dressing tools (for manual use)Continued next pageHolders for diamond wheel dresserExecution: shape A, for manual use with a wooden gripApplication: to accommodate multi-grain <strong>and</strong> single diamond dressing tools with shank MT 1 (DIN 228-1)Thickness of the hexagonal shank x the overall length mm 15 x 23061220 Ident. No. 010Unit price E O. R.Prod. Gr. 611Continued next page<strong>Diamond</strong> multi-grain h<strong>and</strong> dressersApplication: for the accurate dressing of ceramic grinding wheels.Ident. No. 010 for T-shape peripheral wheels.Ident. No. 020 for P-shape cup wheels.Shape T PArea of coating L x W mm 25 x 8 25 x 8Overall length mm 200 200<strong>Diamond</strong> weight Carat 1,5 1,561230 Ident. No. 010 020Unit price E O. R. O. R.Shape TShape PProd. Gr. 611Continued next pageDIAROND multi-grain dressersApplication: for dressing straight grinding wheels.Special shapes for certain machine types.Directions for use, as No. 61200 or according to the instructions of the machine manufacturer.Type A 4 D 6Grain size D 601 D 1001For Machine CHRIST<strong>EN</strong> twist drill grinder type 2-32 DECKEL tool grinding machines61250 Ident. No. 010 030Unit price E O. R. O. R.Type A 4Type D 6Prod. Gr. 611Continued next pageDIAPLAT multi-grain wheel dressersApplication: for dressing straight <strong>and</strong> sectional grinding wheels.<strong>Diamond</strong> + chemistryNo. 61324 No. 61333–61334Number 61324 61333 61334Type FCS 140 FDS 115 FDS 140Thickness of coating X mm 1,40 1,15 1,40<strong>Diamond</strong> grain size D 1181 D 1001 D 1181Suitable for dressing s<strong>and</strong>ing disks Ø mm 500 -1200 100 -750 100 -750Grain size 36 - 54 54 - 80 36 - 54Ident. No. 010 010 010Unit price E O. R. O. R. O. R.Prod. Gr. 611Continued next pageSwivel holdersfor DIAPLAT multi-grain dresser MT 0 <strong>and</strong> MT 1 on request2011/121393