pH 500 meter product bulletin - Oakton Instruments

pH/mV/°CpH 500 MeterOur most economical benchtop meter—a new standard in its pricerange! The large dual display shows pH or mV, plus temperature.Low cost plus high performancethis meter offers laboratory-quality readingsfor a very economical costISO 9001v e n d o rCERTIFIEDpH MeasurementDual display shows both pH(or mV) and temperatureplus mode indicators and annunciators tosignal meter statusThree point pH calibration withauto buffer recognitioncalibrate at 4.01, 7.00 and 10.00 for highaccuracy across the entire measuring rangeSwitch from pH to mV readingswith a button pressFeatures 0.1 mV resolution forORP and ISE measurementsthis is the only meter in its price class thatoffers 0.1 mV resolution—a requirement forISE readingsyear3 warrantymeter onlySelectable manual or automatictemperature compensationfor high accuracy with or without atemperature sensorAnalog recorder outputcreate hard copies of your readingsHold functionfreezes reading until you can record it“Ready” indicatorshows when the reading is stableIdeal for student usethis easy-to-use meter is so economical,you’ll want several for your lab!Fully diagrammed manual,plus slide-out instruction cardfor quick referenceTop: The pH 500 meter is designed for laboratorybenchtop use. It is less sensitive to electronic noise,which gives you stable, repeatable readings.Bottom left: Use the recorder output to create hardcopy records of your data.Bottom right: This simple-to-use meter is ideal forroutine measurements or student use.Laboratory benchtop readings at an economical price! The pH 500 meter providesstable, accurate measurements in pH, mV and temperature. It has high 0.1 mV resolution for ORP and ISEmeasurements—it’s the only meter in its price class to offer this feature. Since this meter so easy to use,you’ll be ready to take readings in minutes!The pH 500 meter features a large dual display that shows pH (or mV) and temperature readings, and awater-resistant membrane keypad. It includes a slide-out instruction card that stores underneath the meterfor quick reference.The pH 500 meter is supported by a full selection of OAKTON calibration buffers, electrodes and accessories.See the back of this sheet for ordering information and complete specifications....setting the standard, again and again

Large dual display showspH or mV plus temperature readings,and indicators which signalfunction and meter status.pH 500 Benchtop Meter• Applications •General Applications: Ideal for all kinds of water quality and chemical testing in the laboratory.Suitable for most ASTM and EPA test procedures.Education Applications: Ideal for students at all levels; suitable for all types of chemistry lab and ecology studies.Industrial Applications: Boiling water/cooling water testing, food processing water testing, process and wastewater testing in metal finishing,printing and chemical industries. Also used in aquarium and hydroponics industries.Back panel has quickconnections for electrode,ATC probe, and recorder output.Slide-out instruction cardwith trouble shooting tips and akeypad reference stores neatly atbottom of meter.• Specifications •Type pH mV TemperatureRange 0.00 to 14.00 pH ±400 mV and ±1999 mV 0 to 100°CResolution 0.01 pH 0.1 mV from ±400 mV, 1 mV beyond ±400 mV 0.1°CAccuracy ±0.01 pH ±0.2 mV from ±400 mV,±2 mV beyond ±400 mV 0.5°CCalibration Up to three calibration points (4.01, 7.00, 10.00) — Offset up to ±5°CConnectors BNC BNC mini phono plugPower: 9 VDC, 500 mA; using AC adapter (included);choose from 110 VAC, 60 Hz or 220 VAC, 50 Hz models.AC adapter is CSA and UL listed.Input impedance: >10 12 ΩTemperature Compensation:Selectable Manual or Automatic from 0 to 100°CRecorder output: ±1999 mV (directly proportional to input)Recorder output connector: mini pin (subminiature phono plug)Display: Dual display of measurement with temperature andmode annunciatorsError messages: Diagnose operator error, electrode error,and meter error. Pull-out instruction card decodes messageOperating Temperature: 0 to 50°C, non condensing humidityDimensions:Meter: 9" x 7" x 2.375" (23 x 18 x 6 cm)Boxed: 15.5" x 10" x 3.5" (39 x 25 x 9 cm)Weight: Meter only 1.25 lbs (0.6 kg); Boxed 3 lbs (1.4 kg)Sturdy benchtop electrode holderkeeps your probe steady and awayfrom the sides of your container(order separately).Calibration solutions are availablein economical bottles or convenientpouches with a tear-off top(order separately).• Ordering Information •pH 500 MetersAll meters include AC adapter and instructions.Meter onlyWD-35617-02 pH 500 meter, 110 VACWD-35617-07 pH 500 meter, 220 VACMeter with single-junction pH electrode (WD-35801-00) andseparate temperature probe (WD-35615-05)WD-35617-00 pH 500 meter, 110 VACWD-35617-05 pH 500 meter, 220 VACMeter with “All in One” combination temperature sensor/single-junction pH electrode (WD-35801-71)WD-35617-03 pH 500 meter, 110 VACWD-35617-08 pH 500 meter, 220 VACpH “Singles” Calibration Buffer PouchesEach single-use pouch contains 20 ml of fresh calibration solution(see picture below left). ±0.01 pH accuracy at 25°C. Certified toNIST traceable standards. Shpg wt 1 lb (0.5 kg). Box of 20.WD-35653-01 pH “Singles”, 4.01WD-35653-02 pH “Singles”, 7.00WD-35653-03 pH “Singles”, 10.00WD-35653-00 pH “Singles”, rinse waterWD-35653-04 pH “Singles”, assortment pack,5 each of pH 4.01; 7.00; 10.00 and rinse waterpH Calibration Buffer Solution Bottles1 pint of calibration solution each. ±0.01 pH accuracy at 25°C.Certified to NIST traceable standards. Shpg wt 1.3 lbs (0.6 kg).WD-00654-00 pH 4.01 calibration bufferWD-00654-04 pH 7.01 calibration bufferWD-00654-08 pH 10.01 calibration bufferElectrodesWD-35805-04 Laboratory pH electrode, double junction,glass body, refillable. 110 mm x 12 mm dia.WD-35801-00 pH electrode, single junction;epoxy body, 146 mm L x 12 mm diaWD-35615-05 Temperature (ATC) probe,304 SS, 85 mm LWD-35801-71 “All-in-One” combination pH/temperatureprobe, single junction, epoxy body, 147 x 12 mm diaWD-35801-72 “All-in-One” combination pH/temperatureprobe, double junction, epoxy body, 147 x 12 mm diaWD-35805-13 ORP electrode, single junction,epoxy body, 146 mm L x 12 mm diaWD-35805-15 ORP electrode, double junction,epoxy body, 146 mm L x 12 mm diaWD-35617-50 Benchtop electrode holder, 360° pivot,holds four electrodes (up to 12 mm dia) and temperature probe.Box dimensions: 9"L x 15"W x 10"H. Shpg wt 4 lbsOAKTON offers a wide selection of pH and ORP electrodes; contact your OAKTON distributor for more information.• ORDER FROM •Bulletin pH C1R2Printed in the U.S.A. 8/01. OAKTON TM Reg. #1,692,543. Patent Des. 371,748. We reserve the right to make changes, improvements and modifications toproducts shown. All prices subject to change without notice. OAKTON Instruments are available only through authorized OAKTON distributors.