Manual - TRS-RenTelco

Input modules
# Description
1 Black (-) input
2 Red (+) input
Note: The use of guarded banana test leads will eliminate the possibility of introducing a
ground to the equipment under test if a regular banana test lead should come in contact with
the recorder metal case.
UNIV-6 Differential / DC bridge inputs
Use the following diagram to connect to the differential / DC bridge inputs.
# Description
1 Differential input (+)
2 Differential input (-)
3 Excitation output (0 to 10V DC, 30 mA max)
4 Excitation return (ISOCOM)
UNIV-6 DC bridge wiring diagrams
Use the following diagrams to set up DC bridge wiring on the four-pin connector on
the UNIV-6.
Four-wire full bridge
26 TMX Operations Manual
1
2
3
4