| LED DRIVERS | L - Arrow Electronics

Supplier Briefs| LED DRIVERSICsAllegro MicroSystems ....................................... 40-41Analog Devices, Inc. .......................................... 42-43Infineon Technology........................................... 44-45Linear Technology.............................................. 46-54National Semiconductor ................................... 55-57NXP Semiconductors ........................................ 58-59ON Semiconductor ............................................ 60-61STMicroelectronics............................................ 62-65Supertex ................................................................... 66Texas Instruments.............................................. 67-68ModulesCML Innovative Technologies ................................ 69OSRAM SYLVANIA................................................... 70http://lighting.arrow.com | 1.888.9LIGHT1

4 0 L E D D R I V E R S : ICsBacklight LED DriversAllegro MicroSystems offers a growing portfolio of devices used to drive LEDs for LCD panelbacklighting and WLED Flash/torch. Both boost- and charge-pump architectures cover a widevariety of applications, with minimal external component requirements and high levels of integration.Allegro’s backlight LED drivers are highly-integrated ICs with on-chip FETs, providing a smallsolution size. They also offer high performance and efficiency in small TDFN and TQFNpackages ranging in size from 2 mm x 3 mm to 4 mm x 4 mm.Features• Small packages• Excellent matching• Low quiscent current• Charge pump and boost designs• Multiple control methodsBenefits• Reduced solution size• Uniform brightness• Longer battery life• More solution choices• Flexible dimming controlApplications• Mobile phones• Notebooks and desktopLDC panels• Portable media players• GPS/navigationsystems• Digital camerasProduct SpecificationsPartNumberTypeDimming TypeNumberof LEDs/StringNumberof StringsConfigurationInputVoltage(VDC)Output Voltage(VDC)Output Peak EfficiencyCurrent (mA) (%)DiagnosticCapabilities*A8430PWM/analog 2-6 1 Series 2.5-10 36 25 87 TSD PWM/analogA8431 PWM/analog 2-6 1 Series 2.5-10 32 25 87 TSD/OVM PWM/analogA8480 PWM/analog 2-10 1 Series 2.7-923 (higher withsplit inductor)250 90 TSD PWM/analogA8481 Boost PWM/analog 2-10 2 Series 2.7-923 (higher withsplit inductor)250 90 TSD PWM/analogA8500 PWM/analog 8-12 8 Series 5-25 47 25 x 8 92 TSD/OVM/LOD Serial/PWM/analogA8504 PWM/analog 8-11 6 Series 5-25 47 40 x 8 92 TSD/OVM/LOD Serial/PWM/analogA8435PWM/analog 1 4 Parallel 2.7-5.5 6 30 x 4 92 TSD/OVM/LOD SerialA8434 Charge pump PWM/analog 1 6 Parallel 2.7-5.5 6 30 x 6 92 TSD/OVM/LOD SerialA8530 PWM/analog 1 6 Parallel 2.7-5.5 630 x 4and 100 x 292 TSD/OVM/LOD SerialMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, OVM: Output voltage monitoring, LOD: LED open detectionInterfaceMarketsArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 4 1Single- and Multi-Channel Constant-CurrentDrivers for LED Displays, Signs, Architectural,and Automotive LightingAllegro MicroSystems offers a broad portfolio of LED drivers for signs, displays and decorative, entertainmentlighting, and automotive lighting with a variety of features and channel counts and high-current outputs.Features• Output currents up to350 mA per channel• 10-bit PWM per channel• 7-bit current-control DACs forcolor calibration (dot correction)• Open LED and shortedLED detection• Thermal shutdown andundervoltage lockout• Automotive voltage andtemperature rating (A6260)Benefits• Drive high-brightness LEDs• Precise brightness control• Accurate color balanceand white point• Remote diagnostics• Full protection of driver ICApplications• Full-color LED video displays• Monochrome to full-colormesssage and graphic displays• Channel letter signs• Architectural anddecorative lighting• Stage and entertainment lighting• Automotive interior lighting• Automotive exteriorsignal lightingA6285 16-channel LED driver with dotcorrection and open LED detectionin 5 mm x 5 mm QFN packageProduct SpecificationsPart Number Type Dimming TypeA6285A6279A6282A6278A6277A6280A6281A6260LinearLinearregulatorInternal DAC/external PWM/external resistorExternal PWM/external resistorExternal PWM/external resistorExternal PWM/external resistorLogic input dimsto 50%/external PWMor resistorInternal PWM/internal DAC/external resistorInternal PWM/internal DAC/external resistorNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilities*Interface3 16 Series/parallel 3-5 13 80 NA LOD/TSD/UVLO Serial/PWM/analog4 16 Series/parallel 3-5 17 90 NA LOD/TSD/UVLO Serial/PWM/analog3 16 Series/parallel 3-5 13 50 NA TSD/UVLO Serial/PWM/analog4 8 Series/parallel 3-5 17 90 NA LOD/TSD/UVLO Serial/PWM/analog6 8 Series/parallel 5 24 150 NA UVLO Serial/PWM/analog4 3 Series/parallel 5-17 17 150 NA TSD/UVLO Serial/PWM/analog4 3 Series/parallel 5-17 17 150 NA TSD/UVLO Serial/PWM/analogExternal PWM/analog 3 1 Series 6-40Input—2.25Vat 350 mA350 NATSD/OVM(currentfoldback)PWM or analogMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, UVLO: Under voltage lock out, OVM: Output voltage monitoring, LOD: LED open detectionMarketsArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 4 3Flash LED Driver, LED, and Backlighting LED DriversThe ADP1653 is an ultra-compact, high efficiency, 12V boost converter from Analog Devices,specifically designed and optimized for use in cellular camera phones and digital still cameras.The ADP1653 solution consumes a mere 7.2 mm x 6.4 mm of board space while still offering highefficiencyFlash circuitry that can drive one string of high-brightness LEDs up to 500 mA, as well asa separate indicator LED at lower currents up to 17 mA.Analog Devices offers LED drivers for automotive and LCD backlighting applications. Products likethe AD8240, designed for automotive applications, both drive and monitor the LED assembly. Endusers are demanding bigger, brighter, and thinner displays. The ADM8845 and ADM8843 chargepump-basedbacklight drivers are designed for driving up to six and four white LEDs in parallel,respectively, while ensuring uniform brightness of a backlit LCD display. By individually monitoringeach LED current, excellent matching performance is achieved. The ADM8845 is also designedto maximize power efficiency by switching automatically between three charge pump modes basedon the input voltage. For applications with severe height restrictions, the ADM8843 offers an ultrathinpackage height of 0.5 mm.Features• Small 45 mm 2 total solution size• 92 percent efficiency• 90 lumens of brightness• Tx masking with 50 µs• 2.2 µH power inductor• 500 mA Flash currentBenefits• Reduces bill of materials• Extends battery life• Improves picture quality• Enables smaller form factorsApplications• Digital still cameras• Camera phones• Portable videorecordersProduct SpecificationsPart Number Type Dimming Type of LEDs/NumberStringNumber ofStringsConfigurationInput Voltage(VDC)AD8240 NA PMW Variable NA Serial/parallel 9-27 12 Adjustable NA Yes AnalogADM8843 NA PMW 4 WLED NA Parallel 2.6-5.5 2X mode 30 88 TSD/SCP Pin controlledADM8845 NA PMW 6 WLED NA Parallel 2.6-5.5 X mode 30 88 TSD/SCP Pin controlledMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, SCP: Short circuit protectionOutputVoltage(VDC)OutputCurrent(mA)PeakEfficiencyDiagnostic(%)Capabilities*InterfaceMarketsArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

4 4 L E D D R I V E R S : ICsLinear-Mode LED DriversInfineon Technologies’ linear-mode LED driver family, BCR401, BCR402, BCR405, and newly introducedBCR450, provides efficient, low-cost constant-current solutions for LED strings from 10 mA to 700 mA.Our constant-current drivers keep light emission consistent over power supply and temperature variations,eliminate the effect of V F variation, and help prevent thermal runaway in applications. We also offer lowforward voltage schottky diodes, including single-package reverse polarity protection diode arrays (RPP).FeaturesBenefitsApplicationsUltra small 2 mm x 2.1 mmSOT343 package• Constant current adjustable from10 mA to 60 mA, up to 500 mWpower dissipation• Current range may be extended upto 700 mA with addition of external“boost” transistor (e.g., BCX68-25)• Selection of 18V or 40V maximumrating across driver• On/off feature enablesPWM/FM modulation• LED-circuit protection due to negativetemperaturecoefficient (NTC)• Efficient active current regulation,accuracy of I OUT at ±1%/Vvoltage variation• Maintains consistent light emissionacross LED strings independent of V F ,power supply, and temperature variation• Enables using more LEDs in onebranch due to low voltage dropcompared to resistor biasing schemes• Eliminates problem of stockingmultiple-bias resistor values to matchincoming LED V F bins• Channel lighting• Advertising signage• Home/office lighting(recess lamps,pendant lamps, etc.)• Rope lighting/neonreplacement• Automotive (e.g., centerhigh-mounted stoplight “CHMSL”)Product SpecificationsPart NumberBCR401R/BCR402RBCR401W/BCR402WBCR401U/BCR402U/BCR405UBCR450 †BCR401R + BCX68-25TypeSingle-outputchannelDimmingTypePWM/FM capableon/off inputPWM/FM capableon/off inputPWM/FM capableon/off inputPWM/FM capableon/off inputPWM/FM capableon/off inputNumberof LEDs/StringAt 12V supply voltagefour red ortwo blue LEDsAt 12V supply voltagefour red ortwo blue LEDsAt 12V supply voltagefour red ortwo blue LEDsAt 12V supply voltagefour red ortwo blue LEDsAt 12V supply voltagefour red ortwo blue LEDsNumberofStringsConfiguration1 Series1 Series1 Series1 Series1 SeriesInput Voltage(VDC)Max. 18 acrossdeviceMax. 18 acrossdeviceMax. 40 acrossdeviceMax. 27 acrossdeviceMax. 18 acrossdeviceMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Junction temperatureOutputVoltage(VDC)Linear w/low-voltagedropLinear w/low-voltagedropLinear w/low-voltagedropLinear w/low-voltagedropLinear w/low-voltagedropOutputCurrent(mA)Adjustable10-60/20-60Adjustable10-60/20-60Adjustable10-65/20-65Adjustable10-65/20-65Adjustable65-700PeakEfficiency(%)NANANANANADiagnosticCapabilitiesNANANANANAInterfaceDiscreteinterfaceDiscreteinterfaceDiscreteinterfaceDiscreteinterfaceDiscreteinterfaceMarkets60 mA to 700 mA range LED driver with booster transistorand reverse polarity protection*BAS3007A: If max.=700 mA, V F =0.38V (typ.) for each diode, V REV max.=30VArrow Electronics Lighting Group1.888.9LIGHT110 mA to 65 mA range stand alone LED driver with reverse polarity protection*BAS3010A: If max.=1A, V F =0.38V (typ.), V REV max=30Vhttp://lighting.arrow.com

L E D D R I V E R S : ICs 4 5Linear Constant-Current LED DriversTo address the increasing growth of LED usage in the automotive market, Infineon offers powersupplies specifically developed for these applications.Infineon products are designed to supply constant current to white or color LEDs up to 500 mA,independently from supply voltage or LED forward voltage class. This provides appropriate operatingconditions to the connected LEDs, enabling constant brightness and ensuring extended LED lifetime.Products with adjustable output current and PWM input enable flexible use of LEDs in applicationsthat require brightness regulation avoiding color shift. Diagnostic capability is also offered with theopen load detection feature.Infineon LED drivers are outstanding solutions that benefit from the advantages of LEDs providingfull protection to lighting applications in automotive. Connected LEDs are fully protected from shortcircuit, overheating, reverse polarity transients, and input voltages up to 45V.Features• Adjustable constant-output current• Wide input voltage range• Over-temperature protection• Open load detection• Wide temperature range:-40°C to +150°CBenefits• Efficient active current regulation,accuracy of I OUT at ±1%/Vvoltage variation• Maintains consistent light emissionacross LED strings independentof V F , power supply andtemperature variation• Enables use of more LEDs in onebranch due to low-voltage dropcompared to resistor biasing schemes• Eliminates problem of stockingmultiple-bias resistor valuesto match incoming LED V F binsApplications• Emergency lighting• Traffic lighting• Architectural orconcert lighting• Automotive (interiorand exterior) lighting• Display backlighting(e.g., LCD)P-DSO-8, 5 mm x 6 mmProduct SpecificationsPart Number Type Dimming Type of NumberLEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilities*TLE4241PWM 10 1 Single Up to 45 40 70 NA TSD/TEF/OVM/LOD PWMTLE4242 PWM 10 1 Single Up to 45 40 500 NA TSD/TEF/OVM/LOD PWMLinearTLE4309 PWM 10 1 Single Up to 45 40 500 NA TSD/OVM PWMTLE4240-2M/3M PWM 10 1 Single Up to 45 6 58 NA TSD/TEF/OVM/LOD PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, TEF: Thermal error flag, OVM: Output voltage monitoring, LOD: LED open detectionInterfaceMarketsArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

4 6 L E D D R I V E R S : ICsHigh-Power (350 mA to 10A) LED Drivers—BuckHigh current, inductor-based, step-down switching LED drivers provide tiny, efficient high powerLED lighting solutions for automotive, architechtural, and display backlighting. Key features includewide-ranging True Color PWM dimming, wide input voltage range, high-side sensing, and highswitchingfrequency.FeaturesLT3475• True Color PWM delivers constantcolor with 3000:1 dimming range• Wide input range: 4V to 36Voperating, 40V maximum• Accurate and adjustable controlof LED current from 50 mA to 1.5A• High-side current sense allowsgrounded cathode LED operation• Accurate and adjustable 200 kHzto 2 MHz• Available in a compact 20-leadTSSOP thermally enhancedsurface-mount packageBenefits• Enables wide dimming range• Ideal for automotive andindustrial applications• Easy dimming• Enables one-wire LED connector• Keeps externals tiny• Compact solution footprintApplications• Automotive andavionic lighting• Architectural detail lighting• Display backlighting• Constant-current sourcesProduct SpecificationsPartNumberTypeDimmingTypeNumberof LEDs/StringNumberof StringsConfigurationInput Voltage(VDC)OutputVoltage(VDC)OutputCurrent(mA) †PeakEfficiency(%)DiagnosticCapabilities* InterfaceLT ® 3474 Buck LED driver 400:1 PWM 3 x 500 mA 1 Series (3 max.) 4-36 15 1 87 TSD/OVM PWMLT3517 Buck, boost, buck-boost 5000:1 PWM 10 x 100 mA 1 Series 3-30 (40 max.) 45 1A 92 TSD/OVM PWMLT1618Buck, boost,buck-boost LED driverDC/PWM 2 x 350 mA 1 Series (2 max.) 1.6-18 30 1.5 87 TSD/OVM PWMLT3477SEPIC, buck, boost, buckboost,flyback, inverterLT3478/-1Buck, boost, buck-boostDC/PWM 5 x 1A 1 Parallel/series 2.5-5Depends uponconfiguration3 91 TSD/OVM PWM3000:1 PWM 8 x 1.5A 1 1 series string (8 max.) 2.7-36 40 4.5 92 TSD/OVM PWMLT3518 5000:1 PWM 10 x 200 mA 1 Series 3-30 (40 max.) 45 1A 92 TSD/OVM PWMLT3475 Dual-buck LED driver 3000:1 PWM 3 x 1.5A 2LT3476LTC ® 3783Quad buck, boost, buckboostLED driverSEPIC, buck, boost, buckboost,flyback, inverter1000:1 PWM 5 x 1A 43000:1 PWM,10:1 analog2 x multiple seriesstring (3 max.)4 x multiple seriesstring (8 max.)4-36 15 2 x 1.5 88 TSD/OVM PWM2.8-64 x 12 x 1A 1 Series/parallel 3-36+Depends uponconfigurationLimited byext. FET4 x 1.5 96 TSD/OVM PWM

L E D D R I V E R S : ICs 4 7High-Power (350 mA to 10A) LED Drivers—BoostHigh current, inductor-based, step-up switching LED drivers provide compact, efficient, LED lightingsolutions for notebook computer displays, cell phone camera lighting, automotive dashboard lighting,and avionics displays. Key features include high current, high-voltage switches, wide-ranging True ColorPWM dimming, wide input voltage range, and high switching frequency.FeaturesLT3478-1• True Color PWM delivers constant LED colorwith up to 3000:1 range• Wide input range: 2.8V to 36V; idealfor industrial applications• 4.5A, 42V internal switch• Drives LEDs in boost, buck-boost, or buck modes• Integrated resistors for inductor and LEDcurrent sensing• Program LED current de-rating vs. temperature• Fixed-frequency operation from200 kHz to 2.25 MHz• 16-pin thermally enhanced TSSOP package withcompact solution footprintBenefits• Can drive 6 x 700 mALEDs in boost configuration• No need for externalsense resistor• Enhances reliability• Keeps externals tiny• Compact solution footprintApplications• High-power LED driver• DSL modems• Distributed power• CVCC source• Input/output current-limitedboost, SEPIC, inverting,flyback converters• Ideal for automotive andindustrial applicationsProduct SpecificationsPartNumberTypeDimmingTypeNumberof LEDs/StringNumberof StringsConfiguration*Diagnostic capabilities: TSD: Thermal shutdown, OVM: Output voltage monitoring† Switch current**I OUT ~ 0.65 I SW x (V IN /V OUT )—estimate may vary depending on external component selection†† Max. V IN =3.2VInput Voltage(VDC)OutputVoltage(VDC)OutputCurrent(mA) †**PeakEfficiencyDiagnostic(%)Capabilities* InterfaceLTC3490 †† Sync boost LED driver DC/PWM 1 x 350 mA 1 Single LED 1-3.2 4 I LED =350 mA 90 TSD/OVM PWMLT3517 Buck, boost, buck-boost 5000:1 PWM 10 x 100 mA 1 Series 3-30 (40 max.) 45 1A 92 TSD/OVM PWMLT3486 Dual LED driver 1000:1 PWM 7 x 350 mA 2 Dual parallel strings 2.7-24 35 2 x 1.3 85 TSD/OVM PWMLT1618Buck, boost,buck-boost LED driverDC/PWM 7 x 350 mA 1Parallel or seriesstrings1.6-18 36 1.5 80 TSD/OVM PWMLT3479 Buck LED driver DC/PWM 6 x 1A 1 Series strings 2.5-24 40 3 89 TSD/OVM PWMLT3477SEPIC, buck, boost,buck-boost, flyback, inverterDC/PWM 6 x 1A 1 Series 2.5-25 40 3 92 TSD/OVM PWMLT3478/-1 Boost LED driver 3000:1 PWM 6 x 700 mA 1 Series strings 2.7-36 40 4.5 91 TSD/OVM PWMLT3518 Buck, boost, buck-boost 5000:1 PWM 10 x 200 mA 1 Series 3-30 (40 max.) 45 1A 92 TSD/OVM PWMLT3476LTC3783Quad buck, boost, buck-boostLED driverSEPIC, buck, boost,buck-boost, flyback, inverter1000:1 PWM 8 x 350 mA 43000:1 PWM10:1 analog4 x multiple seriesstring12 x 3 x 1A 1 Series/parallel 3-36+2.8-16 36 4 x 1.5 83 TSD/OVM PWMLimited byext. FETExt. FET 95 TSD/OVM PWMLT3755 Buck, buck-boost, 3000:1 PWM 14 x 1A 1 Series 4.5-40 Ext. FET Ext. FET 92 TSD/OVM PWMLT3756 boost controller 3000:1 PWM 14 x 1A 1 Series 6-100 Ext. FET Ext. FET 92 TSD/OVM PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGEMarketsLT3478-1—Automotive TFT LCD BacklightVIN 8V TO 16V10 µH4.7 µF45.3k54.9kVIN VS L SWSHDNVREFOUTCTRL2LT3478-1 LEDOVPSET10 µF0.1ΩRSENSE(LT3478)130kPWM DIMMINGCONTROLCTRL1PWM SS VC RT1 µF0.1 µF69.8k700 mA15W6 LEDs(WHITE)Arrow Electronics Lighting Group1.888.9LIGHT13478 TA01http://lighting.arrow.com

L E D D R I V E R S : ICs 4 9High-Power (350 mA to 10A) LED Drivers—Multi-TopologyHigh current inductor-based multi-topology switching LED drivers provide flexible solutions for highvoltageLED arrays. Key features include high current, wide input voltage range, scaleable outputvoltage, and wide-ranging True Color dimming.FeaturesLTC3783• High current• High voltage• Protection• True Color PWM 3000:1digital dimming• Multi-topologyBenefits• Delivers high current (>1.5A) and powershigh brightness (HB) and super HB-LEDs• Easily drives strings (series) or clusters(series + parallel) of LEDs• Accurate current and output voltage protectsHB-LEDs; additional protection includesovervoltage, overcurrent, and soft start• Preserves LED’s constant color over a widedimming ratio; capable of additional analog100:1 dimming• Adjustable LED brightness• Protects against overheating• Can create multiple colors by separatelydimming red, green, and blue LEDs• Can be specified for many LED arrangementsas buck, boost, buck-boost, or flybackApplications• RGGB lighting• Automotive and avioniclighting• TFT LCD backlighting• Constant-current sourcesProduct SpecificationsPartNumberTypeDimmingTypeNumberof LEDs/StringNumberof StringsConfigurationInput Voltage(VDC)Output Voltage(VDC)OutputCurrent(mA) †PeakEfficiency(%)DiagnosticCapabilities*LT3517 Buck, boost, buck-boost 5000:1 PWM 10 x 100 mA 1 Series 3-30 (40 max.) 45 1A 92 TSD/OVM PWMLT1618LT3477SEPIC, buck, boost, buckboost,flyback, inverterDC/PWMDC/PWM2 x 350 mA(in buck-mode)4 x 1A(in buck-mode)1 Series 1.5-181 Series 2.5-25Depends onconfigurationDepends onconfigurationInterface1.5 85 TSD/OVM PWM3 91 TSD/OVM PWMLT3518 Buck, boost, buck-boost 5000:1 PWM 10 x 200 mA 1 Series 3-30 (40 max.) 45 1A 92 TSD/OVM PWMLT3478/-1 Buck, boost, buck-boost 3000:1 PWMLT3476LTC3783Quad buck, boost, buck-boostLED driverSEPIC, buck, boost, buckboost,flyback, inverter1000:1 PWM3000:1 PWM,10:1 analog8 x 1.5A(in buck-mode)4 x 8 x 1A(in buck-mode)4 x 12 x 1A(in buck-mode)1 Series 2.7-3644 x multipleseries string2.8-161 Series/parallel 3-36Depends onconfigurationDepends onconfigurationLimited by ext.FET4.5 92 TSD/OVM PWM4 x 1.5 96 TSD/OVM PWMExt. FET 90+ TSD/OVM PWMLT3755 Buck, buck-boost, 3000:1 PWM 14 x 1A 1 Series 4.5-40 Ext. FET Ext. FET 92 TSD/OVM PWMLT3756 boost controller 3000:1 PWM 14 x 1A 1 Series 6-100 Ext. FET Ext. FET 92 TSD/OVM PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, OVM: Output voltage monitoring† Switch currentMarketsLTC3783—PWM LED Driver in Boost ModeV IN6V TO 16V(< TOTAL V FOF LEDs)1M10 µF×22.2 µH0.1 µF10 µF10k6k105kLTC3783RUN V INPWMIN OV/FBI TH PWMOUTSSV REFFBPFBNFREQSYNCI LIMGATESENSEINTV CCGND4.7 µF0.05ΩM1237kLED*STRINGM212.4k 0.3ΩV OUT

5 0 L E D D R I V E R S : ICsHigh-Power Drivers for Organic LED (OLED) BiasLinear Technology delivers highly integrated solutions for OLED bias applications. Key featuresinclude output disconnect, soft start, and integrated Schottky diodes. Their small circuit size and highefficiency make them ideal solutions for space-conscious, portable device applications such ascellular phones and media players.FeaturesLT3494• Low-quiescent current— 65 µA in active mode— 1 µA in shutdown mode• Switching frequency is non-audible overentire load range; ideal for wirelessand MP3 applications• Integrated power NPN:— 350 mA current limit (LT3494A)— 180 mA current limit (LT3494)• Integrated Schottky diode• Integrated output disconnect• Integrated output dimming• Wide input range: 2.3V to 16V; idealfor Li-Ion to 12V applications• Tiny 8-lead 2 mm x 3 mm solutionfootprint DFN packageBenefits• Maximizes battery-run time• Ideal for OLED display• Compact, highly-integratedOLED solutionApplications• Organic LED power supply• Low-noise power• MP3 playersProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)Output Current(mA) †PeakEfficiency(%)DiagnosticCapabilities*LTC3459 Synchronous boost NA 1 NA Single 1.5-5.5 10 60 89 TSD NALT3464NA 1 NA Single 2.3-10 34 85 84 TSD NABoostLT3494/A Pin adj. 1 NA Single 2.3-16 40 150/350 85 TSD NALT3463NA 2 NA Dual 2.4-15 ±40 180/320 77 TSD NABoost and inverterLT3472 NA 2 NA Dual 2.2-16 ±40 250/300 83 TSD NALT1613NA 1 NA Single 0.9-10 34 550 89 TSD NABoostLT3495 Pin adj. 1 NA Single 2.3-16 40 650/350 85 TSD NALT3487 Boost and inverter NA 2 NA Dual 2.3-16 ±28 750/900 77 TSD NALT3473/ANA 1 NA Single 2.2-16 36 1.2A 77 TSD NABoostLT3467/A NA 1 NA Single 2.4-16 40 1.4A 90 TSD NALT3471 Boost or inverter NA 2 NA Dual 2.4-16 ±40 2A/1.5A 86 TSD NALTC3458/L Synchronous boost NA 1 NA Single 1.5-6 7.5/6 1.4A/1.7A 96 TSD NAMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown† Switch currentInterfaceMarketsLT3494—Micropower Low-Noise Boost Converter with Output Disconnect15 µHV IN3V TO 4.2V4.7 µFSWCAP0.22 µFV CCLT3494SHDNCTRLV OUTFBGND2.21MV OUT16V@16 mA2.2 µFArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 5 1Low-to Medium-Power LED Drivers—InductorlessThe Linear Technology family of charge pump-based LED drivers includes a wide selection of simpleand compact inductorless DC/DC converter designs. These step-up converters offer low ripple andcan be used to boost an input voltage and drive LEDs. By eliminating the inductor, these switchedcapacitorconverters provide a small solution footprint and a simple design.FeaturesLTC3204-5/LTC3204B-5• 1.2 MHz constant frequencyoperation• Constant frequency operationat all loads (LTC3204B only)• Automatic Burst Mode operation(LTC3204 only)• Built-in soft start• Inductorless design• Few external components (3)• Tiny 6-lead (2 mm x 2 mm x0.75 mm) DFN packageBenefits• Minimizes input and output ripple andswitching noise• Burst mode defeated—lower ripple atlight loads; fixed-frequency operationat all loads (B version only)• Low I Q extends battery run time; higherefficiency with the tradeoff of higherripple; variable frequency operation• Reduces inrush current• Minimizes footprint/externals• Minimizes BOM and saves cost• Compact, low-profile footprintApplications• 2 AA cell to3.3V conversion• Li-Ion/Polymerto 5V conversion• USB on-the-go devices• White or blue LED drivers• Handheld devicesActual sizecomplete solutionProduct SpecificationsPart Number Type Dimming TypeNumberof LEDs/StringNumber ofStringsConfigurationInput Voltage(VDC)Output Voltage(VDC)OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilities*InterfaceLTC3200PWM 5+ 1 Parallel 2.7-4.5 Adj. (1.268-5.4) 100 87 TSD PWMLTC3200-5 PWM 5+ 1 Parallel 2.7-4.5 5 100 87 TSD PWMLTC3201 DAC 5+ 1 Parallel 2.7-4.5 Adj. (3.19-4.6) 100 87 TSD Parallel binaryLTC3202 DAC 6+ 1 Parallel 2.7-4.5 Adj. (3.3-4.0) 125 87 TSD Parallel binaryLTC3204-5** LED Driver PWM 6+ 1 Parallel 2.7-5.5 5 150 93 TSD PWMLTC3204B-5 PWM 6+ 1 Parallel 2.7-5.5 5 150 93 TSD PWMLTC3203B PWM 6+ 1 Parallel 2.7-5.5 Adj. (0.9-5.4) 500 90 TSD PWMLTC3203-1** PWM 6+ 1 Parallel 2.7-5.5 4.5/5 500 90 TSD PWMLTC3203B-1 PWM 6+ 1 Parallel 2.7-5.5 4.5/5 500 90 TSD PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown**Burst mode operationLTC3204-5/LTC3204B-5—Low Noise, Miniature Regulated Charge Pump Doubler in 2 mm x 2 mm DFNMarkets2.2 µF3V TO 4.4V +Li-lon/PolymerBATTERYON OFF2.2 µFC - C +V IN V OUTLTC3204-5/LTC3204B-5SHDN GNDDRIVE UP TO 5 WHITE OR BLUE LEDs2.2 µF 100Ω 100Ω 100Ω 100Ω 100Ω(APPLY PWM WAVEFORM FORADJUSTABLE BRIGHTNESS CONTROL)V SHDNtArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

5 2 L E D D R I V E R S : ICsLow-Power (20 mA to 100 mA) Multi-Display LEDDrivers—Inductor BasedMulti-display inductor-based white LED drivers are capable of driving up to 20 white LEDs from asingle-cell Li-Ion/Polymer input. Key features include high-voltage internal power switches, internalSchottky diodes, adjustable switching frequency, DC dimming control, open LED protection, andoptimized internal compensation. They are ideal solutions for multipanel LCD backlight applicationsor space-constrained portable applications such as cellular phones, PDAs, and digital cameras.FeaturesLT3486• Drives up to 16 white LEDs at25 mA from a 3.6V supply• Drives up to 16 white LEDs at100 mA from a 12V supply• True Color PWM dimming delivers constantcolor with 1000:1 dimming range• Two independent step-up DC/DCconverters with independent dimmingand shutdown• Wide input voltage range: 2.5V to 24V• Programmable constant switchingfrequency: 200 kHz to 2 MHz• Tiny 10-lead (5 mm x 3 mm x 0.75 mm)DFN-16 package or TSSOP-16EpackageBenefits• Ideal for TFT-LCD screens up to 6"in handhelds• Ideal for automotive displays withTFT-LCD screens up to 10"• Eliminates the color shift normallyassociated with LED current dimming• 1000:1 dimming ratio is required onmany automotive and handheld displays• Ideal for applications with multiple screens• Can be used with single-/dual-cellLi-Ion/Polymer to automotive/industrialsupply voltages• Minimizes switching noise and size ofexternal components• Minimizes solution footprint/cost whileenhancing system reliabilityApplications• Notebook PCdisplays• LED camera lightfor cell phones• Car dashboardlighting• Avionics displaysProduct SpecificationsPartNumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsLT3497 Dual LED driver 250:1 PWM 6 x 20 mA 2LT3466-1LED driver and boostconverterConfigurationDual seriesstringsInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent (mA) †PeakEfficiency(%)DiagnosticCapabilities*Interface2.5-10 32 2 x 300 78 TSD PWMDC/PWM 10 x 25 mA 1 Series 2.7-24 39.4 2 x 320 84 TSD PWMLT3466 Dual LED driver DC/PWM 10 x 25 mA 2LTC3452Synchronous buck-boostLED driverDC/PWM5 x 20 mA +1 x 200 mALT3486 Dual LED driver 1000:1 PWM 10 x 100 mA 2LT3496 Triple LED driver 3000: 1 PWM 7 x .5A 3LT3498LED driver plusOLED powerDC/PWM10 x 25 mA+ OLEDDual seriesstrings2.7-24 39.4 2 x 320 84 TSD PWM1 Parallel 2.7-5.5 4.5 1A 88 TSD PWM2Dual seriesstringsThree seriesstringSingle LEDstring OLED2.7-24 35.4 2 x 1.3A 85 TSD PWM3-30 45 21 x 500 95 TSD PWM2.5-12 32 10 x 25 + 30 75 TSD PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown† Switch currentLT3486—Dual 1.3A White LED Step-Up Converter with 1000:1 Dimming RangeMarkets12V (TYP)9V TO 15V10 µF10 µH10 µHLUXEONLEDsLXCL-PWF1IN5VD11 µF D22.2 µF2.2 µFV 100 100 mA SW1 SW2mAOFF ONOVP1CTRL1SHDNOVP2CTRL2V INLT3486 REFPWM1PWM20.1 µFFB1FB2LUXEONLEDsLXCL-PWF1DIMMINGINPUT 1PWMFREQ1 kHz100kQ12Ω3.65k2.2 nF21.5kV INV C1 R T V C2GND3.65k22pF2.2 nF Q22ΩDIMMINGINPUT 2PWMFREQ1 kHz100kArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 5 3Low-Power LED Drivers (Up to 25 mA)—Inductor BasedLow current inductor-based switching LED drivers ensure light intensity matching across LEDs. Keyfeatures include the purest white LED color dimming control, low standby mode quiescent current,selectable current level, guaranteed LED brightness matching, and extremely small circuit size, makingthem well suited for cellular phone and other portable backlight applications.FeaturesLT3491• Drives up to six white LEDs from a3V supply• Internal Schottky diode• High-side current sense• Input voltage range: 2.5V to 12V• Constant 2.3 MHz switching frequency• 300:1 True Color PWM dimming• 27V open-LED protection• Tiny 8-lead SC70 packageBenefits• Ideal for most cell phones/PDAs/MP3and media players• Enables one-wire current source• Ideal for single-cell Li-Ion/Polymerapplications• Keeps noise out of critical RF bands,enables the use of tiny externals• Enables precise dimming control forhandheld application without colorshifts of the LEDs• Maximizes system reliability• Compact, low-profile footprintApplications• Cellular phones• PDAs, handheldcomputers• Digital cameras• MP3 players• GPS receiversProduct SpecificationsPartNumberTypeDimmingTypeNumberof LEDs/StringNumberof StringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA) †PeakEfficiencyDiagnostic(%)Capabilities*LT3590 Buck LED driver 200:1 PWM 10 1 Series 4.5-5.5 NA 80 90 TSD/OVM PWMLT3465/ADC/PWM 6 x 25 mA 1 Series 2.7-16 30 225 81 TSD/OVM PWMLT3591 Boost LED driver 90:1 PWM 10 x 20 mA 1 Series 2.5-12 42 450 77 TSD/OVM PWMLT3491 300:1 PWM 6 x 25 mA 1 Series 2.5-12 27 260 76 TSD/OVM PWMLTC3452Synchronous buck-boostconverterDC/PWM5 x 20 mA+ 200 mAInterface1 Parallel 2.7-5.5 4.5 300 88 TSD/OVM PWMLT1937 Boost LED driver DC/PWM 4 x 25 mA 1 Series 2.5-10 34 320 84 TSD/OVM PWMLT3497250:1 PWM 2 x 6 x 20 mA 22 parallel seriesstrings of 62.5-10 32 2 x 300 77 TSD/OVM PWMBoost/dual LED driverLT3466 DC/PWM 2 x 10 x 25 mA 22 parallel seriesstrings of 102.7-24 40 2 x 320 84 TSD/OVM PWMLT3466-1 LED driver/boost converter DC/PWM 10 x 25 mA 1 Series 2.7-24 40 2 x 320 84 TSD/OVM PWMLT1932 Boost LED driver DC/PWM 10 x 25 mA 1 Series 1.0-10 34 400 80 TSD/OVM PWMLT1942Quad DC/DC converterand LED driverDC/PWM 12 x 25 mA 12 parallel seriesstrings of 62.6-16 44 550 77 TSD/OVM PWMLT1618 LED driver DC/PWM 8 x 25 mA 1 Series 1.6-18 36 1.5A 86 TSD/OVM PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, OVM: Output voltage monitoring† Switch currentLT3491—White LED Driver in SC70 with Integrated SchottkyMarketsShutdown and Dimming ControlV IN3V–5V10 µHV INCTRLLT3491CAPLED10Ω1 µFSWGND1 µFArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

5 4 L E D D R I V E R S : ICsLow-to-Medium Power Multi-DisplayLED Drivers—InductorlessLinear Technology’s family of inductorless, multi-display, charge-pump-based LED drivers features thehighest level of integration, smallest footprint, and highest efficiency. Individual display driver outputseliminate the need for ballast resistors. These ICs optimize flexibility for designers of portableproducts, ranging from fully-featured, multi-display cellular phones to high-current/high-resolutioncamera flash electronic devices.Actual sizecomplete solutionFeaturesLTC3208• High-efficiency operation up to 95 percent:—1x, 1.5x, or 2x boost modes withautomatic mode switching• Capability to drive up to 17 LED currentsources: MAIN, SUB, CAM, RGB, AUX• Ultra-low dropout I LED current control• Output current up to 1A• 1 percent LED current matching• LED on/off, brightness level anddisplay configuration programmableusing two-wire I 2 C Interface• 256 brightness states for MAINand SUB displays• 4,096 color combinations for RGB display• Low noise, 850 kHz constantfrequency operation• Inductorless charge pump design• 32-lead (5 mm x 5 mm x 0.75 mm) QFNpackage,

L E D D R I V E R S : ICs 5 5Integrated Constant-Current Buck RegulatorsNational Semiconductor offers a broad portfolio of easy to design, energy-efficient buck regulatorsideal for driving LEDs in a wide variety of applications. With integrated switching MOSFETs andonline design tools as well as extensive protection features and dimming capability, National’s buckLED drivers maximize ease of design without sacrificing functionality. National’s LED drivers alsofeature low feedback voltages and very high efficiencies to enable energy-efficient lighting solutions.Features• Online design tools easeIC selection, enable designsimulation, and offer orderableevaluation kits with custom BOMs• Low external component counts• Fast PWM dimming inputs• Low (≤200 mV) feedback voltages• Thermal, open-circuit, andshort-circuit protectionBenefits• Design tools and integrated switchesincrease ease of design and time to market• Low external component counts minimizeBOM cost and total solution size• Low feedback voltages, high efficiencies,and excellent package technologiesmaximize heat dissipation• Wide input voltage ranges and high currentcapabilities increase design flexibility• Supports all ceramic output capacitorsand capacitor-less outputs for smallestsolution sizeApplications• General illumination• Automotive lighting• Industrial lighting• Architectural lighting• SignageLM3402/02HV evaluation board withfemale 6-pin SIP connector and twostandard 94 mil turret connectors foreasy connection to LED arrayProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)*Diagnostic capabilities: TSD: Thermal shutdown, OVM: Output voltage monitoring, UVLO: Under voltage lock out, LOD: LED open detectionDiagnostic Capabilities* Interface MarketsLM3402PWM 1-10 1 Series 6-42 40 500 90 Over-current protection/TSD/LOD PWMLM3402HV PWM 1-20 1 Series 6-75 70 500 90 Over-current protection/TSD/LOD PWMLM3404 PWM 1-10 1 Series 6-42 40 1,000 90 Over-current protection/TSD/LOD PWMLM3404HV PWM 1-20 1 Series 6-75 70 1,000 90 Over-current protection/TSD/LOD PWMLM3405BuckPWM 1-4 1 Series 3-15 14 1,000 90Over-current protection/TSD/LOD/OVM/UVLOPWMLM3405A PWM 1-5 1 Series 3-22 20 1,000 90Over-current protection/TSD/LOD/OVM/UVLOPWMLM3407 PWM 1-7 1 Series 4.5-30 27 350 96Over-current protection/TSD/LOD/UVLOPWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGELM3404/04HV schematicThe LM3404/04HV are constant-current buck regulators capableof up to 1A of output current. The LM3404HV can support up tofifteen 1W or 3W LEDs in seriesLM3405/05A schematicThe LM3405/05A are 1A constant-current buck regulators designedto provide simple, high-efficiency solutions for driving high-power LEDs.These devices feature a low 205 mV feedback voltage to reduce heatdissipation, and can support up to five 1W or 3W LEDs in seriesVisit lighting.arrow.com/designtools to access free design tools, including National’s LED reference designs and LED WEBENCH online tools.Arrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

5 6 L E D D R I V E R S : ICsConstant-Current Boost RegulatorsNational’s portfolio of constant-current boost regulators features inductive and switched-capacitorsolutions for applications such as backlighting, flash, and portable lighting. For higher currents,National has a variety of high-efficiency inductive-boost LED drivers. National’s switched-capacitorLED drivers offer small, inductor-less, low-noise solutions for both parallel and series LEDconfigurations. Features such as multiple dimming interfaces and current matching can alsobe found in inductive and switched capacitor drivers.The LM3509 is a high-efficiency boostconverter for white LEDs and/or OLEDdisplays with dual-current sinks andI 2 C-compatible brightness control.This LED driver is ideal for small-tomedium-sized displays in batterypoweredapplications.Features• PWM, analog, and I 2 C dimminginterfaces• Built-in current matching• Adjustable and fixed switchingfrequency options• Thermal shutdown, flash timeout, opencircuit,and short-circuit protection• Supports OLED displaysBenefits• Multiple dimming interfacesincreases design flexibility• Current matching ensures parallelLED arrays have even, balancedbrightness• Various switching frequency optionsallow for solution size, efficiency,and EMI optimization• Micro SMD and leadless LLPpackages provide very smallfootprints and minimize solution sizeApplications• Backlighting• Flash LED• Portable lighting(handheld devices,flashlights)• Automotive lightingProduct SpecificationsPart Number Type Dimming TypeNumberof LEDs/NumberInput OutputStringof StringsConfiguration Voltage VoltageOutputPeak(VDC) (VDC)Current (mA)Efficiency(%)Diagnostic Capabilities* Interface MarketsLM3410 Boost, SEPIC PWM 1-6 1 Series 2.7-5.5 24 1,000 88 Over-current protection/TSD/LOD PWMLM3430/32PWM/analog 1-20 6 Series/parallel 6-40 80 40 per string 92Over-current protection/TSD/LOD/UVLOPWM/analogLM3431 PWM/analog 1-10 3 Series/parallel 5-36 40 150 per string 88Over-current protection/TSD/OVM/LODPWM/analogLM3509 I 2 C 1-5 2Series/parallel/OLED2.7-5.5 21 30 per string 92 TSD/soft start I 2 CLM2756 I 2 C 1 8 Parallel 2.7-5.5 4.6 180 91 TSD/OVP/soft start I 2 CLM2757BoostNA 1-10 NA NA 2.7-5.5 4.1/4.5/5 180 92Over-current protection/TSD/shutdown w/high Binaryimpedence/soft startLM3553 NA 1-2 1 Series 2.7-5.5 19 1,200 90 TSD/OVM/Flash pulse safety timer I 2 CLM4510 NA NA NASeries/parallel/OLED2.7-5.5 18 280 85*Diagnostic capabilities: TSD: Thermal shutdown, UVLO: Under voltage lock out, LOD: LED open detectionTSD/output short-circuitprotection/feedback faultprotection/input UVLO/softstart/true shutdown isolationLM2755 I 2 C 1 3 Parallel 3-5.5 5 90 90 TSD/soft start I 2 CLM5022Boost, SEPIC,flybackPWM 1-20 1 Series 6-60 80 1,000 95Over-current protection/TSD/LOD/UVLOMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGEBinaryPWMLM3410 schematicThe LM3410 is a high-frequency, very small, constant-current boostLED driver. A low external component count makes this driver easyto design and minimizes the total solution size and cost. The LM3410has an input voltage range down to 2.7V to support single Li-Ion cellsArrow Electronics Lighting Group1.888.9LIGHT1LM3431 schematicThe LM3431 is a 3-channel linear current controller combined witha boost-switching controller ideal for driving LED backlight panels inspace-critical applications. It accepts both analog and digital controlsignals and can achieve contrast ratios greater than 1,000:1http://lighting.arrow.com

L E D D R I V E R S : ICs 5 7High-Current LED DriversNational offers buck and boost regulators that can drive up to and greater than 6A, ideal forapplications such as backlighting and projection. For example, the LM3433 supports over 6Aof current and allows the LED anodes to be tied directly to the chassis ground for optimal heatdissipation. Also, National’s LM3401 buck regulator is capable of achieving 100 percent dutycycle in order to support a maximum number of LEDs.Features• PWM and analog dimming interfaces• Capable of achieving up to 100%duty cycles• Common-anode configuration allowsLED anodes to be tied directly tochassis ground• Adjustable switching frequenciesup to 2 MHz• Supports high-current applications withbuck, boost, SEPIC, and flyback solutionsBenefits• Common-anode configurationmaximizes heat dissipation andreduces heat sink requirements• High duty cycles allow maximumnumber of LEDs to be poweredby a single LED driver to shrinksolution size and cost• Multiple dimming interfacesprovide design flexibility• Adjustable switching frequencyoptions allow for solution size,efficiency, and EMI optimizationApplications• Backlighting• Projection• Automotive lighting• Industrial lighting• General illuminationThe LM3433 is an adaptive, constant,on-time buck controller designed toprovide constant current for illuminatinghigh-power LEDs. It can drive currentsgreater than 6A and supports athermal, performance-enhancingcommon-anode LED configurationProduct SpecificationsPart Number Type Dimming TypeNumberof LEDs/StringNumberof StringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent (mA)PeakEfficiency(%)Diagnostic Capabilities* Interface MarketsLM3433PWM/analog 1 1 Series -9 to -14 -6 >6,000 96 TSD/LOD PWM/analogBuckLM3401 PWM 1-9 1 Series 4.5 to 35 35 >3,000 95 TSD/LOD PWMLM5022Boost, SEPIC,flybackPWM 1-20 1 Series 6 to 60 80 >1,000 95 TSD/LOD PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, LOD: LED open detectionLM5022 schematicThe LM5022 is a high voltage controller that supports boost, SEPIC,and flyback configurations. Output current regulation is based oncurrent-mode control, which eases the design of loop compensationwhile providing inherent input voltage feed-forwardLM3401 schematicThe LM3401 is a buck-switching controller with an external P-MOSFETswitch, which allows the device to run at 100% duty cycle and continueto drive a string of LEDs when the total forward voltage drop is equal toV IN . Adjustable, dual-side hysteresis allows very flexible inductor selection,switching frequency customization, and reduced propagation delay errorArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

5 8 L E D D R I V E R S : ICsSSL1523 and SSL1750High-Efficiency AC/DC LED Driver SolutionsThe SSL152x, SSL16xx, and SSL1750 families of offline switched-mode power supply (SMPS)controllers are ideal for driving the latest high-brightness LEDs with high efficiency and a full suiteof built-in protection features. For SSL indoor lighting solutions below 15W, the SSL152x family isthe right choice. The ICs operate directly from the rectified universal mains. They are ideal for retrofittingLED lamps and for LED driver solutions used in cabinet, kitchen, and many other lightingapplications in the home. With just a minimum of additional components it offers a driver solutionthat is fully compatible with transistor- and thyristor- (TRIAC-) based wall-mounted dimmers.Between 15W and 24W, the SSL1623PH is very suitable for SSL applications due to the specialheat spreader underneath the IC package. For SSL applications higher then 25W, NXP offers theSSL1750, flyback control, and power-factor correction (PFC) integrated into one IC.Features• Universal mains 80 VAC to270 VAC• Support of power-factorcorrection when required• Wide range of built-inprotection circuits• Meets safety/isolation regulations(UL 1598 Class 2 and IEC60950)Benefits• High-energy efficiency—valley switching for minimumswitch-on loss• Wide input voltage range• Wide current drive capability• Supports next generation ofHB-LEDsApplications• General LED lightingindoor (residential, office,and building)• General LED lightingoutdoor (street lighting,parking lots, tunnel lighting)• Industrial lighting• SignageProduct SpecificationsPartNumberSSL152xSSL153xSSL1623PHSSL1750SSL1610TypeFlyback SMPSResonant powersupplyDimming TypePWM andTRIAC-transistorPWMPWM andTRIAC-transistorPWMNANumberof LEDs/StringPending on outputwattage selectedPending on outputwattage selectedPending on outputwattage selectedPending on outputwattage selectedPending on outputwattage selectedNumberof StringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)NA String/series 80-276 User defined User definedNA String/series 80-276 User defined User definedNA String/series 80-276 User defined User definedNA String/series 80-276 User defined User definedNA String/series 80-276 User defined User definedPeakEfficiency(%)ApplicationdefinedApplicationdefinedApplicationdefinedApplicationdefinedApplicationdefinedDiagnosticCapabilities*MARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, OVM: Output voltage monitoringTSD/OVMTSD/OVMTSD/OVMTSD/OVMTSD/OVMInterfaceAC/DCAC/DCAC/DCAC/DCAC/DCMarketsD1MAINSCONVENTIONALDIMMERdampingresistorS1CbusbleedertransistorCSS1RSS1T2D2SSL1523RAUX1RSENSE1S2COUTRS1Basic application diagram—SSL152xbrb007COMPENSATION12 11 9 16 138106RS2RSS2SSL1750CSS2RSENSE2RAUX2741325CVCCRLOOPΘCTIMEOUTBasic application diagram—SSL1750Arrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 5 9DC/DC LED Driver SolutionsThe UBA3070 is a versatile high-voltage LED controller IC designed for applications where a highnumber of LEDs need to be driven in an accurate and highly energy efficient way. The flexibledesign allows the use of both low-power or high-power LEDs and can be used in combination withLED-strings containing hundreds of LEDs.Features• Direct PWM dimming• LED thermal and ICoverheating protection• Accurate DC/DC conversionwith switch-mode buck converterBenefits• Lower system costs• Higher reliability and extendedIC lifetime• Supports next generationof HB-LEDsApplications• General LED lighting(spotlights and downlights)• General LED lighting(retail display)• Channel letterand contour lighting• Signage• LCD backlightingUBA3070Product SpecificationsPartNumberTypeDimming TypeNumberof LEDs/StringNumberof StringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)UBA3070 LED driver PWM Up to 200 NA String/series 600 NA User definedPeakEfficiency(%)ApplicationdefinedDiagnosticCapabilities*MARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, OVM: Output voltage monitoringTSD/OVMInterfaceDC/DCMarketsBasic application diagram—UBA3070Arrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

6 0 L E D D R I V E R S : ICsLED Driver SolutionsON Semiconductor offers solutions for a wide range of LED applications whether run off an ACmain or battery powered. With a broad portfolio of LED driver solutions, ON Semiconductoraddress everything from LCD backlighting, flashlights, wide DC-input range of applications,including automotive, solar powered, and commercial/landscape lighting powered from 12VDC/AC, to offline applications such as lighting ballasts and power factor correction solutions.NCP1216 in non-isolatedLED driver configurationFeatures• Linear and switching topologies• Wide-input DC-DC solutionsto 40V• Extended temperature rangefrom -40°C to +125°C• Optimized portablebacklighting solutions• Broad choice of packagesBenefits• Enhanced designer flexibility• Suitable for automotiveenvironment• Robust and highly reliable• Low passive parts count• Demo boards and applicationnotes availableApplications• Backlighting (small to mediumLCD panels)• Flashlights (torch and camera flash)• Transportation (interior/exteriorlighting, displays, and marine)• General lighting (architectural,landscape, streetlighting, tasklighting, and low-voltage AC/DC)• Signage (LED ballasts)Product SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)**OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilities*NCP3065PWM/analog NA NA Series 3-40 40 NA 89 TSDBoost or buckNCP/NCV3063 PWM/analog NA NA Series 3-40 40 NA 89 TSDCS51411 Buck PWM/analog NA NA Series 4.5-40 37 NA 93 TSD EnableInterfaceEnablecontrolEnablecontrolMarketsNCP1013PWM/analog NA NA Series 85-265 VAC 50 NA 83 TSD/OVP/SS/UVLO NANCP1014Fixed frequencyPWM/analog NA NA Series 85-265 VAC 50 NA 83 TSD/OVP/SS/UVLO NANCP1028flybackPWM/analog NA NA Series 85-265 VAC 50 NA 83 TSD/OVP/SS/UVLO NADependsNCP1216 PWM/analog NA NA Series 85-265 VAC on V NA 90 OCP/UVLO/TSD NAINNCP1351Variable OFF timeDependsflybackPWM/analog NA NA Series 85-265 VAC on V NA 90 OCP/UVLO/TSD/OPP NAINNUD4001PWM/analog NA NA Series3.6-30 and 60for load dump27 NA NA NA EnableLinearNUD4011 PWM/analog NA NA Series 5-200 198 NA NA NA EnableMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown**Switch currentRs0.15ΩVinCin220 µFNCP3065NC SWCIpk SWEVin CTFB GNDVth = 0.235VCT2.2 nFDTypical Buck Application CircuitLCout22 µF+LEDLEDCluster-LEDRsense0.68ΩDDUniversalAC InputR115, 2 W4.7 nF“x”C1Only Neededfor Maximum PowerApplicationsD1, 2, 3, 41N4007 x 4R6+4.7 µF+C2 400 Vdcx 2L1, 1 mHNCP101427U1 5 481C41.5 nFC3 1 kVD5MUR160C8 +10 µF25 V4D8 31N4148AR91 kR247 k1 W1 T1 D6MBR3507, 8C5A C5B+ +470 µF25 V25, 6C9(“Y” cap)2.2 nFC7100 pF43U21opto 22N2907R4100Q1R3AD7VmaxR5200C610 nFSimpleFeedbackCircuit12 VACNC1234NUD4001CurrentSet Point8765NCP3065 LED driver—buck configurationNCP1014 configured as aconstant current isolated offline LED driverNUD4001 in 12 VAC-powered applicationArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 6 1LED Driver Solutions for Handheld ApplicationsPortable applications require solutions that provide high efficiency, require minimal board space, and lowheight. ON Semiconductor offers LED driver solutions in linear, charge pump, and inductive DC-DCconverter topologies for optimal space savings and inductive solutions for optimal power efficiency. Inaddition, ON Semiconductor offers a broad selection of high-current drivers to support flashlight andcamera flash applications.Features• Linear, inductive, and chargepump solutions• High efficiency• Highly integrated solutions• Ultra-thin micro package 0.55 mm• Simple to useBenefits• Enhanced designer flexibility• Extended battery life• Low overall parts count• Thinner and smaller end products• Demo boards and applicationnotes availableApplications• Small and medium sizeLCD backlighting• Keyboard backlighting• Flashlights, torch, and headlamps• Camera flash• Medical instrumentsNCP1400A powered LED flashlightProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)**OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilities*NCP5050 Boost PWM/analog NA NA Series 2.7-5.5 22 NA 90 Timeout/OVP/TSD EnableNCP5030 Buck-boost PWM/analog NA NA Series 2.7-5.5 5.5 NA 94 OVP/TSD/UVLO EnableNUD4301 Linear PWM/analog NA NA Parallel 2.7-6.0 5.7 NA NA NA EnableNCP1400APWM/analog NA NA Series 0.8-5.0 5.0 NA 89 SS EnableNCP1406 Boost PWM/analog NA NA Series 1.8-5.5 25 NA 85 TSD/UVLO/SS EnableNCP1422 PWM/analog NA NA Series 1.0-5.0 5.0 NA 92 TSD/UVLO/SS EnableNCP5005Boost w/enhancedRFI immunityPWM/analog NA NA Series 2.7-5.5 21 NA 90 OVP/TSD EnableNCP5010 Boost w/integrated Schottky PWM/analog NA NA Series 2.7-5.5 22 NA 84 OVP/TSD EnableNCP5602I 2 C NA NA Parallel 2.7-5.5 5.5 NA 88 OVP/TSD I 2 CNCP5603 PWM NA NA Parallel 2.7-5.5 5.5 NA 90 TSD/SCP EnableNCP5608 PWM NA NA Parallel 2.7-5.5 5.5 NA 86 OVP/TSD EnableNCP5612 Charge pump S-wire link NA NA Parallel 2.7-5.5 5.5 NA 88 OVP/TSD Enable/dimInterfaceMarketsNCP5623 I 2 C NA NA Parallel 2.7-5.5 5.5 NA 93 OVP/SCP I 2 CNCP5604A/B PWM NA NA Parallel 2.7-5.5 4.8 NA 87 OVP/TSD EnableMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown**Switch currentTypical Power Supply 3.7V to 12VVBATL1Typical Supply 2.7 µH toLimited to Range of 4.7 µHC32.7V to 5.5V0.1 µFVINCIN NCP5050C1 910PVIN SW4.7 µF 52PCA VSR1 3CTRL FB 72.8kRPCA 4 HCMENABLE1 6 8PGNDHCSLCSR21.24D3D2D1ITC41.0 µFC21.0 µFCOUTI1 I2 I3 I4 I5 I6 I7 I8 I9 I10V IN1 Cell CINLi-Ion 1 F2.7 to 5.539kPCAR1ENABLECTRLVINC210 FC INAGNDPVIN4.7 HL1LX1LX1LX2COMPFBPGNDV OUTVSNCP5030C322 FD1C OUTRLCS68 68 68 68 68 68 68 68 68 68C422 pFR2100kC5330 pFR3220mR SENSEV CCV CC-cpuI/O pinMCUGNDC5GNDGNDC31 F/6.3V 1 F/6.3VR110kV BAT220 nF/10V 220 nF/10VC1 C21 F/10 V12 10 9 8C4C1N C1P C2N C2P GND11V BATV OUT76NCLWY87S5CNTLD14I REFLED1 2 D21GNDU1NCP5612LED/ICON 3NCP5050 drives 10 x 10 LED for backlightingmedium-size LCD panelLWY87SVINENABLEFLASH/TORCHCINC14.7 µFR12.8kRPCA2.7V to 5.5VL12.7 µHNCP50509PVIN5PCA3CTRL4 HCMPGNDHCSLCSNCP5030 3-Cell Alkaline Flashlight SchematicNCP5030 3-cell alkaline flashlight schematic10SW2VSFB 71 6 8R22.0RHCSR310RLCSD1D2D32 to 5 LEDsC21.0 µFCOUTL1: TDK VLF5012T-2R7 or LargeD1: ON MBR130LSFD2, D3: NSR0320C1: 4.7 µF, 6.3 V XSR 0603TDKO1008X5R0J475MC2: 1.0 µF, 25V XSR 0805C3: 0.1 µF, 25V XSR 06032 LED Charge Pump Application SchematicNCP5612 2 LED charge pump application schematicArrow Electronics Lighting Group1.888.9LIGHT1NCP5050 driving 2 to 5 HB-LEDs in flashlighthttp://lighting.arrow.com

6 2 L E D D R I V E R S : ICsLED7706 LED Driver—Monolithic Driver for up to60 White LEDs for Mobile PC LCD Panel BacklightingLED7706 demo boardThe LED7706 is a monolithic white LED driver specifically designed to supply LED arrays used tobacklight mobile PC LCD panels. It consists of a highly-efficient boost converter integrating a powerMOSFET and six controlled-current generators (ROWs). The device can manage an output voltageable to supply up to 10 white LEDs per ROW. The boost section is based on a constant switchingfrequency, peak-current mode architecture. The boost output voltage is controlled so that the lowestvoltage of the ROW, referred to as SGND, is equal to an internal reference voltage (400 mV typ.).The typical input voltage range is from 4.5V up to 36V. In addition, the LED7706 has an internal 5VLDO regulator that supplies the internal circuitry of the device and is capable of delivering up to 40mA. The input of the LDO is the main input voltage (V BATT ). The boost section switching frequencycan be externally adjusted from 200 kHz to 1 MHz. It also has an internal fixed value of 660 kHz(typ.), which eliminates the need for a resistor, an important feature in minimum component-countapplications. The frequency pin (FSW) can also be used as the synchronization input, allowing theLED7706 to operate both as the master or the slave. The generators can be externally programmedto sink from 16 mA up to 30 mA and can be dimmed via a PWM signal (1 percent dimming dutycycleat 20 kHz can be managed). The device is able to detect and manage the open- and shorted-LED faults. If some ROWs are not used, during the startup the device is able to self-detect andautomatically disconnect the ROWs without any fault detection. Output over-voltage, internal powerMOSFET over-current, and thermal shutdown are provided as protection.Features• Constant-frequency, peak-current control• Internal power MOSFET• External sync for multi-device applications• Pulse-skip, power-saving mode at light load• Programmable soft-start and OVP protection• Ceramic output capacitor• Six ROWs with 30 mA max. currentcapability (adj.)• Up to 10 white LEDs per ROW andROW disable option• 2% current matching between ROWs• LED failure (open- and short-circuit) detection• Housed in VFQFPN 24L space-saving packageBenefits• High efficiency thanksto adaptive-output voltage• High-performance 36Vrated current generators• Up to 20 kHz dimmingfrequency• Keep external tiny• Demo board andapplication notes availableApplications• Backlighting in LCD panelsfor battery/AC adaptersupplied equipment• Notebook panel backlighting• Ultra-mobile PC panelbacklighting• Tablet PC panel backlighting• GPS navigator backlightProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumberof StringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilitiesLED7706 Boost converter PWM 60 white LEDs 6 Series/parallel 4.5-36 Adaptive to 36V 6 x 30 93 LED short/open PWMMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGEInterfaceMarketsApplication schematicArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 6 3STLED316S Panel Controller—LED Display Controllerwith Key-Scan for Cost-Effective DesignsST has recently introduced the STLED316S, an integrated LED driver to help designers achieve amore efficient and simplified design for front panels, such as those found on set-top boxes, DVDplayers, washing machines, dryers, and microwave ovens. The STLED316 is an integrated LED driverthat controls front-panel activities. A typical front panel consists of a key-pad, an LED display panel,and various discrete LEDs. The device employs a unique timemultiplexing scheme to drive displaystogether with key-scans with a limited number of I/Os. The combination of display driving and keyscanningallows the use of a single device like STLED316S for the complete front panel solution.This eliminates the need for sub-CPU and other logics-plus discrete devices, reduces BOM count,and lowers the final cost.Features• Common anode LED driver• Drives 48 outputs (able to drivesix digits, each consisting ofeight segments)• Drive capability of up to 40 mA peroutput. Drives additional eight outputswith individual dimming control; theseadditional eight outputs could be usedto drive discrete LEDs, or it could beused to drive an additional 8-segmentdigit (e.g., 7 x 8-segment digits)• Capable of driving red, green,and blue LEDs• Maximum segment current for thedisplay can be set through oneexternal resistor• Continuous key-scanning upto 16 keys• 3-wire serial SPI interface to MCU• 8-steps dimming capability foreach digit• Available in pin-count optimizedSO-24 packageBenefits• Interrupt output to mainCPU upon key-press doesnot need the CPU to pollthe device continuously• Low power consumptionduring standby• Flexibility means that devicescan be connected in parallelwhen more digits/segmentsare needed• Minimizes the peripheralcomponent countApplications• Can be used in a variety ofapplications where a frontpanel interface is present withLED display and key-scanning• White goods (washers,dryers, microwave ovens,and refrigerators)• Consumer devices (DVDplayers, set top boxes,and gaming machines)• Industrial equipmentProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsSTLED316SMTR Linear PWM 56 NAConfiguration7 digits of 8-segment eachor 56 discrete LEDsInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilitiesInterface5 5 40 NA NA NAMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGEMarketsSTLED316S application diagramSTLED316S evaluation board and PC GUIArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

6 4 L E D D R I V E R S : ICsL6902D—Step-Down Regulator with AdjustableCurrent LimitThe L6902D is a complete and simple step-down switching regulator with adjustable current and voltagefeedback. Thanks to its current control loop with external sense resistor it is able to work in constantcurrentmode, providing up to 1.5A output with an accuracy of 5 percent. The outer voltage control loopis limiting the output voltage in case of load disconnection. Among other benefits, the L6902D features ageneral purpose 3.3V precise (2 percent) reference voltage or 2.5A (typical value) internal-current limit forshort-circuit protection.FeaturesBenefitsApplicationsL6902D evaluation board• Adjustable current limit• Precision 3.3V (±2%) reference• Few external components• Thermal shutdown• Protection againstfeedback disconnection• Constant voltage andconstant current• Adjustable current limit• Simple to implement• Over-voltage protection• High efficiency• General lighting• Dimmable lighting• Automotive interior lightingProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilities*InterfaceL6902D Buck PWM-analog 8 Single Series 8-36 36 1,500 max. 97 TSD PWM/analogMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdownMarketsST LED Evaluation BoardsST Board Order CodeLED Board DescriptionSTEVAL-ILL001V1Dimmable driver for HB power LEDs with Viper22A (DALI connector)STEVAL-ILL002V3High-brightness LED with diagnostic (40 LED) based on STP08DP05STEVAL-ILL002V4High-brightness LED with diagnostic (40 LED) based on STP08DP05STEVAL-ILL003V2High-brightness LED without diagnostic (32 LED) based on STP16CP596STEVAL-ILL009V1RGB color control board based on STP04CM05STEVAL-ILL010V1High-intensity LED dimming driver based on L6902STEVAL-CBP003V1Front-panel evaluation board based on STLED316SSTEVAL-ILL007V1High-intensity LED driver for MR-16 format based on L5973DSTEVAL-ILL008V1LED flashlight demoArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 6 5STCS2—2A Maximum Constant-Current LED DriverThe STCS2 is a BiCMOS constant-current source designed to provide a precise constant currentstarting from a varying input voltage source. The main target is to replace the discrete componentssolution for driving LEDs in low-voltage applications such as 5V, 12V, or 24V giving benefits in termsof precision, integration, and reliability. The device is available in PowerSO-10 that has excellentthermal performance, high-power capability, and high-power density.Features• Up to 40V input voltage• Less than 0.5V voltage overhead• Up to 2A output current• PWM dimming pin• Shutdown pin• LED disconnection diagnosticBenefits• Ease of implementation• Minimum number of externalcomponents• Integrated protection features• Keeps solution footprint tiny• Pb-free packaging availableApplications• LED constant-current supplyfor varying input voltages• General LED lighting• Small appliances LED lighting• Car LED lights• Industrial lightingSTCS2 demoboardProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)DiagnosticCapabilities*STCS2 Linear PWM 10 white LEDs 1 Series 4.5-40 Adaptive to 40V 2A NA LOD NAMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: LOD: LED open detectionInterfaceMarketsTypical application diagram for 2.0A LED currentArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

6 6 L E D D R I V E R S : ICsLED DriversSupertex was founded in 1976 and is a publicly-traded company specializing in high-voltage, mixedsignalICs for driving LEDs, electroluminescent displays, and medical devices. The Supertex LED driverportfolio offers many diverse and innovative devices for applications requiring high-voltage solutions.Features• DC to 450V input range• PWM, linear, and phase dimming• Low harmonic distortion• Small sizeBenefits• Supports universal AC• Supports triac-basedphase dimming• Power-factor correction• Integrated protection features• Minimum number of externalcomponentsApplications• Traffic signals• Automotive lighting• Backlighting for LCD displays• Offline lamps and fixtures• Street lightingProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent (mA)PeakEfficiency(%)DiagnosticCapabilitiesAT9933PWM Configurable 1 Series 9-75 Configurable Ext. FET >80 NA NACukHV9930 PWM Configurable 1 Series 8-200 Configurable Ext. FET >80 NA NACL2NA 1-30 1 Series/parallel 5-90 90 20 NA NA NACL25 NA 1-30 1 Series/parallel 5-90 90 25 NA NA NACL320 NA Configurable 3 Series/parallel 5-90 90 20 NA NA NACL325 Linear NA Configurable 3 Series/parallel 5-90 90 25 NA NA NACL330 NA Configurable 3 Series/parallel 5-90 90 30 NA NA NACL6 NA 1-30 1 Series/parallel 6.5-90 90 100 NA NA NACL7 PWM 1-30 1 Series/parallel 6.5-90 90 100 NA NA NAHV9903 Boost PWM/linear 1-8 1 Series 1.8-12.5 90 NA NAHV9910BPWM/linear Any 1 Series 8-450 90 NA NAHV9921 NA 4-20 1 Series 20-400 12-80 20 >80 NA NAHV9922 NA 4-20 1 Series 20-400 12-80 50 >80 NA NABuckHV9923 NA 4-20 1 Series 20-400 12-80 30 >80 NA NAHV9925 PWM/linear 4-20 1 Series 20-400 12-80 20-50 >80 NA NAHV9980 PWM/linear Configurable 3 Series 100-160 Configurable 70 >85 NA NAHV9911 Boost/SEPIC/ PWM/linear Configurable 1 Series 9-250 Configurable Ext. FET >90 NA NAHV9912 buck-boost PWM/linear Configurable 1 Series 9-100 Configurable Ext. FET >90 NA NAHV9931Buck/buck-boostPWM/phase 1-50 1 Series 8-450 2-200 Ext. FET >80 NA NAHVV9982Boost/buck/SEPICPWM/linear Configurable 3 Series 10-40 Configurable Ext. FET >90 NA NAMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGEInterfaceMarketsArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : ICs 6 7Low-Voltage LED DriversThe TPS61165 operates over a 3V to 18V input supply and delivers an output voltage up to 38V.It operates at a 1.2 Hz fixed switching frequency to reduce output ripple, improve conversion efficiency,and allow for the use of small external components. The LED current can be changed using one-wiredigital or PWM signal. During dimming, the output ripple of TPS61165 at the output capacitor is smalland does not generate audible noises associated with common on/off control dimming.These low-voltage LED drivers are optimized for getting the most life out of battery-powered applications.Features• Input voltage: 2.7V to 18V• Output voltage up to 38V• Switch current limit: 1.2A• Switching at 1.2 MHz• Flexible one-wire digital and PWMbrightness controlBenefits• Wide input supply range for 12Vor 16V industrial power rail• Ultra-small package forhigh-brightness LED• Brightness control withno audible noiseApplications• High-brightness LED lighting• White LED backlighting upto 7-inch displays• Matrix setup with up to60 LEDs (e.g., 6 x 10)TPS61165: 18 V IN 38 V OUT2 mm x 2 mm boost driverProduct SpecificationsPartNumberTypeDimming TypeNumberof LEDs/StringNumberof Strings ConfigurationInputVoltage(VDC)OutputVoltage(VDC)OutputCurrent(mA)PeakEfficiency(%)Diagnostic Capabilities* Interface MarketsTPS75105 Linear PWM 1 4 Parallel 2.7- 5.5 V IN -27 mV 25 83 Over current/over temperature PWM signalTPS60250PWM 1 7 Parallel 2.7-6.5 6 125 85 Over current/OVM/over temperature I 2 CTPS61042 PWM 6 1 Series 2.7-6.0 24 35 85 Over temperature/OVM PWM signalTPS61059 On/off 1 1 Series 2.7-5.5 6 1,500 80 Over temperature/OVM PWM signalTPS61050/2 Digital 1 1 Series 2.5-5.5 V IN -5.5 1,200 96 Over temperature I 2 CTPS61062 PWM 5 1 Series 2.7-6.0 24 55 81 Over temperature/OVM PWM signalTPS61081 Boost PWM 6 1 Series 2.7-6.0 27 350 87 Over temperature/OVM PWM signalTPS61200 PWM 1 1 Series 0.3-5.5 V IN -5.5 1,500 91 Over temperature/OVM PWM signalTPS61140/1 On/off 6 2 2x series 3.0-6.0 28 35 85 Over temperature/OVM PWM signalTPS61150/51 On/off, analog 6 2 2x series 3.0-6.0 2 x 27 35 83 Over temperature/OVM PWM signal/resistorTPS61160/61 Digital, analog 6/10 1 Series 2.7-18 26/38 45 87 Over temperature/OVM Easy scale/PWMTPS61165 Digital, analog 10 1 Series 3.0-18 38 350 87 Over temperature/OVM Easy scale/PWMTPS63000 Buck-boost PWM 1 1 Series 5.5-1.8 5.5-1.2 1,200 96 Load disconnect/over temperature PWM signalMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: OVM: Output voltage monitoringArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

6 8 L E D D R I V E R S : ICsTLC59xxx Family of Linear LED DriversTLC59xxx devices offer up to 1 percent channel-to-channel and 3 percent chip-to-chip currentregulation accuracy. The serial data input devices can run up to speeds of 30 MHz. The speed ofthe image display can be improved by these devices quick turn-on and turn-off time. Also, note thesmall amount of voltage headroom over the LEDs V F to bias the internal linear element. The TLC59xxxfamily of linear LED drivers provides great flexibility to the designer of high quality signageapplications such as video walls and billboards.TLC5942 offers separate control linesfor analog and digital dimmingFeatures• TLC59116—I 2 C interface with groupdimming and blinking• TLC5916/17—simple global dimming• TLC5923—channel-to-channel dimming• TLC5924—removes ghosting frommultiplexed displaysBenefits• TLC5940—on-chip storageof analog dimming values• TLC5941—lower cost TLC5940without EEPROM• TLC5942—greater control overPWM and analog dimming• TLC5943—high-resolutionPWM dimming• TLC5945—best forhigh-speed videoApplications• Full-motion RGB videowall displays• Gaming• Electronic billboardadvertisement• Large panel LCDbacklighting units• Professional lightingProduct SpecificationsPart NumberTypeDimmingTypeNumberof LEDs/StringNumber ofStringsConfigurationInputVoltage(VDC)Output Voltage(VDC)Output Peak EfficiencyCurrent (mA) (%)DiagnosticCapabilities*TLC59116PWM/analog 4 16 Series/parallel 3.3-5 17 100 NA TSD/LOD I 2 CTLC5916 Analog 4 8 Series/parallel 3.3-5 17 120 NA TSD/TEF/LOD SerialTLC5917 Analog 4 8 Series/parallel 3.3-5 17 120 NA TSD/TEF/LOD SerialTLC5923 Analog 4 16 Series/parallel 3.0-5.5 17 80 NA OVM/TSD/LOD SerialTLC5924 Analog 4 16 Series/parallel 3.0-5.5 17 80 NA OVM/TSD/LOD SerialTLC5940LinearPWM/analog 4 16 Series/parallel 3.0-5.5 17 120 NA TSD/LOD SerialTLC5941 PWM/analog 4 16 Series/parallel 3.0-5.5 17 80 NA TSD/LOD SerialTLC5942 PWM/analog 4 16 Series/parallel 3.0-5.5 17 50 NA TSD/LOD SerialTLC5943 PWM/analog 4 16 Series/parallel 3.0-5.5 17 50 NA TSD/LOD SerialTLC5945 PWM/analog 4 16 Series/parallel 3.0-5.5 17 80 NA TSD/LOD SerialMARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGE*Diagnostic capabilities: TSD: Thermal shutdown, TEF: Thermal error flag, OVM: Output voltage monitoring, LOD: LED open detectionInterfaceMarketsArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S : MODULES 6 9CML Innovative TechnologiesCML offers a number of voltage-to-current drivers/ballasts that are ideal for CML’s line of LED lightengines. These LED drivers convert a voltage power supply and output a constant current to theLED modules over a specific voltage range.Features• Constant current outputs• Drive from 1-16 LEDs• Wide input voltage range• Some models with PWM dimming• Custom current outputs areavailable upon requestBenefits• Compact size• High reliability• Short circuit andoverload protection• Ideal for use with CMLLED modulesApplications• Architectural andlandscape lighting• Task, track, andcabinet lighting• Point of purchase anddisplay case lighting• Interior lightingPS0006-PS0010Product SpecificationsPartNumberTypeDimmingTypeSize(L x W x H)(Inches)Max. #of LEDsLEDConfigurationInputVoltage(V)OutputVoltage(VDC)Max.OutputCurrent(mA)InputFrequency(Hz)ElectricalIsolationProductComplianceTemperatureRange (°C)PS0001NA 1.74 diameter x 0.3 3 Series 10-30 NA 350 50/60 NA NA -20 to +60PS0002 DC/DC NA 1.74 diameter x 0.3 1 NA 10-30 NA 700 50/60 NA NA -20 to +60PS0003 NA 1.74 diameter x 0.3 3 Series 10-30 NA 600 50/60 NA NA -20 to +60PS0004 DC/DC, PWM 1.88 diameter x 0.55 3 Series 10-30 NA 350 50/60 NA NA -20 to +60PS0005 AC/DC PWM 1.88 diameter x 0.55 1 NA 10-30 NA 700 50/60 NA NA -20 to +60PS0006NA 1.7 x 1.65 x 0.9 2 Series/parallel 100-240 VAC NA 350 50/60 NA C-UR/CE -20 to +60PS0007 NA 1.7 x 1.65 x 0.9 1 NA 100-240 VAC NA 700 50/60 NA C-UR/CE -20 to +60PS0008 NA 4.05 x 1.5 x 1.06 8 Series/parallel 120 VAC NA 350 50/60 NA C-UR/CE -20 to +60PS0009 NA 4.05 x 1.5 x 1.06 4 Series/parallel 120 VAC NA 700 50/60 NA C-UR/CE -20 to +60AC/DCPS0010 NA 5.39 x 1.65 x 1.14 16 Series/parallel 120 VAC NA 700 50/60 NA C-UR/CE -20 to +60PS0011 NA 5.39 x 1.65 x 1.14 8 Series/parallel 120 VAC NA 350 50/60 NA C-UR/CE -20 to +60PS0012 NA 2.6 x 1.38 x 1.06 5 Series/parallel 100-240 VAC NA 350 50/60 NA C-UR/CE -20 to +60PS0013 NA 2.6 x 1.38 x 1.06 2 Series/parallel 100-240 VAC NA 700 50/60 NA C-UR/CE -20 to +60MARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGEMarketsMultiple LED Driver Module1.88" diameter0.48" highest componentdimension including PCBSingle LED Driver Module1.74" total diameter0.88" inner diameter0.24" highest componentdimension including PCBArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

7 0 L E D D R I V E R S : MODULESLED Power Supplies and DriversOSRAM OPTOTRONIC ® power supplies and drivers are specifically designed for operating LEDsystems. OPTOTRONIC AC/DC and DC/DC power solutions come in a variety of configurations tomeet the demands of LED applications. Configurations are available with either constant voltage orconstant current outputs.Features• UL Class 2 output• Wide input voltage range with 277Vtypes available• Meet the highest industry standardsfor LED power converters• Broad range of constant voltage orconstant current products availablewith an output wattage of 3W to 240W• Outdoor rated configurations availableBenefits• Optimum operation for LED systems• Protection against short circuit andoverload conditions• Compliant for a variety of applicationsApplications• Signage• Architectural lighting• Area/task illumination• Retail/display lightingProduct SpecificationsPartNumber51502TypeDimmingTypeSize(L x W x H)(Inches)Max. #of LEDsLEDConfigurationInputVoltage(V)OutputVoltage(VDC)Max.OutputCurrent(mA)InputFrequency(Hz)ElectricalIsolationProductComplianceTemperatureRange (°C)NA 2.04 x 2.00 x 0.88 NA Parallel 100-120 VAC 10.5 570 50/60 Class 2 cUL/UL/CSA/IP65 -20 to +5051505 NA 3.03 x 3.27 x 1.33 NA Parallel 120 VAC 10.5 2,350 50/60 Class 2 cUL/UL/CSA -20 to +5051506 NA 5.63 x 2.75 x 1.75 NA Parallel 120 VAC 10.5 2,350 50/60 Class 2 UL -20 to +5051508 NA 9.50 x 1.70 x 1.18 NA Parallel 120 VAC 10.5 4,750 50/60 Class 2 cUL/UL/CSA/IP64 -20 to +5051509 NA 9.50 x 1.70 x 1.18 NA Parallel 120-277 VAC 10.5 4,750 50/60 Class 2 cUL/UL/CSA/IP64 -25 to +6051503 NA 2.04 x 2.00 x 0.88 NA Parallel 100-120 VAC 24 250 50/60 Class 2 cUL/UL/CSA/IP65 -20 to +5051512 NA 2.36 x 2.36 x 1.20 NA Parallel 120-240 VAC 24 830 50/60 Class 2 cUL/UL/CE -20 to +5051598 AC/DC NA 9.50 x 1.50 x 0.65 NA Parallel 120 VAC 24 2,100 50/60 Class 2 cUL/UL -20 to +5051513 NA 9.50 x 1.63 x 1.18 NA Parallel 120 VAC 24 3,100 50/60 Class 2 cUL/UL/CSA/IP64 -20 to +5051514 NA 9.50 x 1.63 x 1.18 NA Parallel 120-277 VAC 24 3,100 50/60 Class 2 cUL/UL/CSA/IP64 -25 to +6051511 NA 12.32 x 2.54 x 1.67 NA Parallel 120-277 VAC 24 4,000 50/60 Class 2 cUL/UL/IP66 -30 to +7051515 NA 11.95 x 5.98 x 2.95 NA Parallel 120-240 VAC 24 3,300/ch. 50/60 Class 2 cUL/UL/IP66 -30 to +7051524 NA 1.71 x 1.63 x 0.90 2 Series 120-240 VAC 4-12 350 50/60 Class 2 cUL/UL -20 to +6051525 NA 3.15 x 1.58 x 0.87 5 Series 100-120 VAC 1.5-25 350 50/60 Class 2 cUL/UL/CSA -20 to +5051526 PWM 3.15 x 1.58 x 0.87 5 Series 10-24 VDC 1.5-25 350 NA Class 3 cUL/UL/CSA -20 to +50MARKETS LEGEND COMMERCIAL LIGHTING FLASHLIGHTS TRANSPORTATION BACKLIGHTING SIGNAGEAll photos courtesy of Osram Sylvania ®OPTOTRONIC is a registered trademark of OSRAM GmbHMarketsArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com

L E D D R I V E R S 7 1NotesArrow Electronics Lighting Group1.888.9LIGHT1http://lighting.arrow.com