Fitting Instructions - Paddock Spares

More documents

Recommendations

Info

Your existing spare wheel plate may me slightlylarger than the one shown here because thereis more than one type. This procedure is stillthe same regardless of plate type.Undo the screws around the existing plate. Youwill need to hold a spanner on the nut on theinside of the door.Retain the screws and nuts for the fitment ofthe replacement plate.Withdraw the inner plate with the three sparewheel mounting pins.Now the outer plate is free to pull away fromthe outer skin of the door.
Position the new plate on the door and hold inplace with x 2 of the original screws.Mark off the x 4 cylinder mounting holes.Remove the plate so that the holes can bedrilled to the correct size.Once the holes are drilled then re-mount theplate using all seven mounting screws andtighten in place.The upper door carrier hinge bolts on to thecapping. The two rivets are drilled out and therivet holes are widened for the bolts to passthrough.Make sure the hinge is the correct way aroundas you can see in the picture.Use x 2 bolts and the captive nut plate toloosely bolt the hinge in place for now.
Page 1: Part NumberDA2232Fitting Instructio
Page 5 and 6: Lift the main frame into position a

Fitting Instructions - Paddock Spares

Create successful ePaper yourself

Delete template?

Save as template?