Fitting Instructions - Paddock Spares

Position the new plate on the door and hold inplace with x 2 of the original screws.Mark off the x 4 cylinder mounting holes.Remove the plate so that the holes can bedrilled to the correct size.Once the holes are drilled then re-mount theplate using all seven mounting screws andtighten in place.The upper door carrier hinge bolts on to thecapping. The two rivets are drilled out and therivet holes are widened for the bolts to passthrough.Make sure the hinge is the correct way aroundas you can see in the picture.Use x 2 bolts and the captive nut plate toloosely bolt the hinge in place for now.