Fitting Instructions - Paddock Spares

Pointing to the three mounting holes for thelower hinge on the cross member.You may have to remove the handle if there isone fitted.This view is a cross-member as viewed from the front behind therear wheel arch. The spacing plate and lower hinge bracket areoffered up to the outer skin (rear of the cross-member).On the inside (front) of the cross- member, the two smaller boltspass through the outer cross-member skin and into a captive nutplate (supplied in the fixing kit).The larger bolt goes through the samesupport plate and then through the sleeve(also provided in fixing kit). It then passesthrough a second skin at the front of thecross-member before the nut is wound on.