SIL99-2A - The Fly Baby Home Page

WARNINGMixing of the EGME compound with the fuel is extremely important because concentration inexcess of that recommended (0.15 percent volume maximum) can have a harmful effect onengine components. Use only blending equipment that is recommended by the manufacturer toobtain proper proportioning.LubricantsTYPE APPLICATION REMARKSMolyshield GreaseStarter Worm Gear Drive Teeth &Bevel Gear TeethNeedle bearings and ball bearingsAll ModelsAt engine AssemblyP/N 654568-1Valve stemsAdapter-Tach Reduction (TSIO & L/TSIO 360)All Accessory drive splines andcouplingsAll models as applicableIdler gear and pinGTSIO/IO/TSIO-520, IO/O/TSIO-470all 550Grade 50 Break-in Non-compoundedAviation Oil SAE J 1966Oil Seal Lips onlyFuel injection controls, o-rings,springs, shafts and bushingsMagneto rubber drive bushingsOil Pumps (Pressure & Scavenge)Crankshaft BearingsConnecting Rod BearingsProp Driver, Driven Gears &BearingsCamshaft BearingsTachometer Gears & AdaptersAccessory Spur Gear TeethQuill Shaft SplinesProp Governor Trans Collar & SleeveStarter Cone, Bushing & NutStarter Clutch Spring (ID & OD)Valve Guide SealsPistons, Piston Pins & Piston RingsFuel connections to carb. (malethreads only)V.T.C. Unit Pistons & centrifugalvalves. Rocker arms, pivots, valvesand tappetsThrust WashersOil Filter adapter sealsO-RingsAll ModelsExcept models: TSIO-520-D, all 360,& GTSIO-520-K which use grade 50WAll ModelsAll Models / Coat gear cavity atassembly of pumpAll ModelsAll Models / Apply to sealing surfaceAll ModelsCarburetor equipped modelsTIARA 6-285, 6-230All ModelsISSUED REVISED PAGE NO REVISIONMO DAY YEAR MO DAY YEAR 4 of 28 A03 29 99 08 27 2002SIL99-2P.O. Box 90 Mobile Alabama • 251-438-3411