SIL99-2A - The Fly Baby Home Page

Sealants (Continued)ContinuedP/N 642188 - Gasket Sealant(K & W Copper Coat 1504-12)Loctite 592 Teflon PS/T Pipe SealantP/N 646940 - F/I SealantorLoctite 569 Hydraulic SealantP/N 649246 Loctite 290 SealantMiller-StephensonMS 122DFOil seal accessory drive (O.D. only)TSIO-360, A, AB, C, CB, D, DB and IO-360-C, CB,G,GB2 Bolt suction tube gasket - both sides All 470, 520, 550 models as applicableUse on all pipe threads except asnotedAll pressure relief valve housingthreadsPermold 2 studs engine mount 1-3-5side bottomAll threaded fasteners installed in a Apply before installing threaded partthrough hole to an oil sourceAll pipe thread fittings in fuelApply in accordance with Figure 9injection systemData plate screw installation onthrottle bodiesIgnition harness terminals at magnetoblock endAll models where applicableAll ModelsAdhesivesTYPE APPLICATION REMARKSLoctite 271 High Strength Adhesive Rocker cover stud, rocker arm pivot TIARA 6-285, 6-230 onlySealant (used withstuds, push rod retainer studP/N 653693 Primer or Loctite 7471) Cylinder deck studs All models breakaway torque 100 inlbs.after 2 hrsCrankcase breather tubes470 & 520 (Sandcast) & GTSIO-520Bolts for nose seal retainer to crankcaseAll ModelsSquirt nozzleAll ModelsMechanical Tach Drive Studs to an oil Engine models as applicablesourceOil pump gear mounting pin in 360 modelsaccessory coverAll press fit breather and oil filler necks 360 & IO-240 modelsIntake manifold mount studs C-75, C-85, C-90 & O-200V.T.C. unit bushing retaining screwV.T.C. unit housing to crankshaftTop accessory drive gear (breatherslinger) boltsTIARA 6-285, 6-230Studs on coolant manifoldFuel manifold valve diaphragm &plunger assemblyAll liquid cooled modelsIO-240 All 360, 470, 520, 550 modelsISSUED REVISED PAGE NO REVISIONMO DAY YEAR MO DAY YEAR 7 of 28 A03 29 99 08 27 2002SIL99-2P.O. Box 90 Mobile Alabama • 251-438-3411