OCEAN, OFFSHORE and ARCTIC ENGINEERING - Kivi Niria
OCEAN, OFFSHORE and ARCTIC ENGINEERING - Kivi Niria
OCEAN, OFFSHORE and ARCTIC ENGINEERING - Kivi Niria
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Tuesday, 15:30–17:30<br />
Offshore Technology Symposia<br />
1-6 Mooring <strong>and</strong> Anchoring – II<br />
Tuesday June 21 Penn I | 15:30–17:30<br />
Session Chair: Vikas Jhingran, Shell Exploration <strong>and</strong> Production International, USA<br />
Session Co-Chair: Erik Falkenberg, DNV, Norway<br />
An Experimental Investigation Into the Pull-Out Capacity<br />
of Suction Caissons in S<strong>and</strong> OMAE2011-49038<br />
Siamak Kakasoltani 1 Mostafa Zeinoddini 1 Mahmoud Reza Abdi 1 Hamid Arabzadeh 2<br />
1. K.N.Toosi University of Technology, Tehran, Iran; 2. PNU University, Tehran, Iran<br />
Positioning of the Offshore Platform OMAE2011-49436<br />
Mahmut Olcay Korkmaz 2 Caner Guney 1 Rahmi Nurhan Celik 1<br />
1. Istanbul Technical University, Istanbul, Turkey; 2. Istanbul Technical University, Ankara, Turkey<br />
Modeling the Dual Crane Lift of Maersk BD Module OMAE2011-49633<br />
Mohamed Abou-Malwa, Chellakat Joe-Joe, Sajith Nair<br />
J. Ray McDermott, Dubai, UAE<br />
Global Performance of Synthetic Rope Mooring Systems –<br />
Frequency Domain Analysis OMAE2011-49723<br />
Erik Falkenberg 1 Vidar Åhjem 1 Halvor Lie 2 Karl E. Kaasen 2 Kjell Larsen 3<br />
1. Det Norske Veritas, Høvik, Norway; 2. Marintek, Trondheim,<br />
Norway; 3. Statoil, Trondheim, Norway<br />
Structures, Safety <strong>and</strong> Reliability Symposia<br />
2-19 Fracture & Fatigue Reliability – II<br />
Tuesday June 21 Goudriaan I | 15:30–17:30<br />
Session Chair: Jonas Ringsberg, Chalmers University of Technology, Sweden<br />
Session Co-Chair: Ying Min Low, Nanyang Technological University, Singapore<br />
Fatigue Behavior of CHS Joints Fabricated Using Enhanced<br />
Partial Joint Penetration Welds OMAE2011-49107<br />
Xudong Qian, Peter Marshall, Yuthdanai Petchdemaneengam, Chien Thang Nguyen<br />
National University of Singapore, Singapore, Singapore<br />
A Damage Mechanics Finite Element Simulation of a Fracture<br />
Mechanics Experiment for S690 Steel OMAE2011-49201<br />
Carey Walters<br />
TNO Centre for Mechanical <strong>and</strong> Maritime Structures, Delft, Netherl<strong>and</strong>s<br />
Effect of Low Cycle Fatigue Damage on Ultimate<br />
Strength of Aged Ship Structures OMAE2011-49314<br />
Yu Tian, Zhuo-shang Ji<br />
Dalian University of Technology, Dalian, Liaoning, China<br />
Full Scale Measurements of Fatigue <strong>and</strong> Extreme Loading<br />
Including Whipping on an 8600TEU Post Panamax Container<br />
Vessel in the Asia to Europe Trade OMAE2011-49378<br />
Svein Erling Heggelund 1 Gaute Storhaug 1 Byung-Ki Choi 2<br />
1. Det Norske Veritas, Oslo, Norway; 2. HHI, Ulsan, Korea<br />
Experimental Study on Fatigue Strength of Welded<br />
Joints under Storm Loading OMAE2011-49658<br />
Chang-Hyun Moon 3 Kiyoshi Hashimoto 3 Yooseok Song 3 Kyung-Su Kim 2<br />
Sunghoon Kim 4 Bong Jae Kim 4 Yong Suk Suh 3 Yong Lae Shim 1<br />
1. ABS, Houston, TX, USA; 2. Dept. of Naval Architecture <strong>and</strong> Ocean Engineering, Inha University,<br />
Incheon, Korea; 3. Samsung Heavy Industries, Geoje, Korea; 4. INHA University, Geoje, Korea<br />
48 | www.asmeconferences.org/OMAE 2011<br />
Structures, Safety <strong>and</strong> Reliability Symposia<br />
2-31 Ultimate Strength – III<br />
Tuesday June 21 Tokyo | 15:30–17:30<br />
Session Chair: Jeom Paik, Pusan National University, Korea<br />
Session Co-Chair: Philippe Rigo, University of Liege, ANAST, Belgium<br />
Tripping Analysis <strong>and</strong> Design Consideration of Permanent<br />
Means of Access Structure OMAE2011-49104<br />
Ming Ma 1 Beom-Seon Jang 2 Owen F. Hughes 3<br />
1. DRS Defense Solutions, LLC, Stevensville, MD, USA; 2. Offshore Basic Engineering Team,<br />
Seoul, Korea; 3. Aerospace <strong>and</strong> Ocean Engineering, Virginia Tech, Blacksburg, VA, USA<br />
Comparison of Numerical Result with Experiment on Ultimate<br />
Strength of Long Stiffened Panel OMAE2011-50294<br />
Mingcai Xu 2 Carlos Guedes Soares 1<br />
1. Technical University of Lisbon, Lisboa, Portugal; 2. Centre for<br />
Marine Technology <strong>and</strong> Engineering, Lisbon, Portugal<br />
Effect of Initial Imperfections on the Strength<br />
of Restrained Plates OMAE2011-49161<br />
Jose Manuel Gordo<br />
Instituto Superior Tecnico, Lisboa, Portugal<br />
A Benchmark Study of ISO TS 18072-2 on the Stiffened<br />
Panel Ultimate Strength OMAE2011-50152<br />
Paul Frieze 1 Jeom Paik 2 Martino Abbattista 1 Mirella Vallascas 1<br />
1. PAFA Consulting Engineers, Middlesex, UK; 2. Pusan National University, Busan, Korea<br />
Investigation into Post-Ultimate Strength Behavior of<br />
Ship’s Hull Girder in Analytical Solution OMAE2011-49617<br />
Weijun Xu 1 Iijima Kazuhiro 1 Masahiko Fujikubo 2<br />
1. Osaka University, Osaka, Japan; 2. Osaka University, Suita, Japan<br />
Materials Technology Symposia<br />
3-17 Strain Based Design of Pipelines<br />
Tuesday June 21 Town Hall | 15:30–17:30<br />
Session Chair: Jaime Buitrago, ExxonMobil Upstream Research, USA<br />
Session Co-Chair: Xin Wang, Carleton University, Canada<br />
Strain Aging of C-Mn Line Pipe Steels: An Analytical Approach<br />
to Compare Strain Aging Heat Treatments OMAE2011-49917<br />
Rick Noecker 1 Nathan Nissley 2 Ning Ma 3 Neeraj Thirumalai 3 Pamela Wojtulewicz 1 Martin Hukle 4<br />
1. ExxonMobil Development Company, Houston, TX, USA; 2. ExxonMobil Upstream<br />
Research Company, Houston, TX, USA; 3. ExxonMobil Research & Engineering<br />
Company, Ann<strong>and</strong>ale, NJ, USA; 4. Trendsetter Engineering, Inc, Houston, TX, USA<br />
Effect of Strain Ageing on Mechanical Properties<br />
of Pipeline Girth Welds OMAE2011-49818<br />
Badri Narayanan, Jon Ogborn<br />
The Lincoln Electric Company, Clevel<strong>and</strong>, OH, USA<br />
Fracture Toughness Testing <strong>and</strong> Validation of Pipeline Girth Weld Flaw<br />
Acceptance Criteria for Sour Service Under Large Strain OMAE2011-49683<br />
YouYou Wu, WenGuo Yuan, Tse Ven Steven Chong, Jens P. Tronskar<br />
Det Norske Veritas, Singapore, Singapore<br />
Fully-Plastic J <strong>and</strong> CTOD Solutions for Pipes with Circumferential Surface<br />
Cracks Subjected to Combined Bending <strong>and</strong> Tension OMAE2011-49312<br />
Luis F.S. Parise, Claudio Ruggieri<br />
University of São Paulo, São Paulo, SP, Brazil
Change language