for docutech printing - Small Engine Suppliers
for docutech printing - Small Engine Suppliers
for docutech printing - Small Engine Suppliers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. Install air cleaner base.4. Insert breather check valve (1) through aircleaner base. Make sure slot in breather valve isin a vertical position as shown, Fig. 35.5. Install nuts (2).a. Torque nuts to 25 in. lbs. (3 Nm).Fig. 35Fig. 36Idle Speed AdjustmentNOTE: Correct adjustment is necessary to obtainproper acceleration and clutch disengagementon clutch drive engines1. Start engine and warm up approximately 5minutes be<strong>for</strong>e adjusting.2. Make surer throttle lever is contacting idleadjustment screw (1), Fig. 37.3. Adjust idle speed to:3600 RPM – Clutch Drive <strong>Engine</strong>4000 RPM – Direct Drive <strong>Engine</strong>6. Install fuel supply line (1) and fuel return line (2),Fig. 36.7. Assemble throttle cable to carburetor.8. Assemble air cleaner.Fig. 3721