Casio Exilim EX-S500 Service Manual

More documents

Recommendations

Info

TEST MODENote: Never perform the menu items unless otherwise instructed. Doing so may cause destruction ofthe data inside, which will make the camera unusable.■ To boot the test mode1. While firmly pressing down both [BS], [PW ON] and [UPPER], turn the power on.[UPPER] button[BS] button2. After the version appears, press buttons in the order of [DOWN], [DOWN], [BS] and [MENU] in 0.5second. The diagnostic menu appears.[DOWN] button++ KX835 ++Ver 1.02[MENU] button[BS] button"DOWN" button -> "DOWN" button -> "BS" button -> "MENU" button1 :VERSION INFO2 :USB TCC TEST3 :ROM UPDATE4 :LAST MEMORY5 :FORMAT"SET" button1 :USB TCC ON2 :USB TCC OFF3 :USB STORAGE4 :USB SPEED"MENU" button— 6 —
PROGRAM VERSION UPGRADING1. To update the firmware version1. Prepare the memory card which contains the firmware for EX-S500 in the root directory.EX-S500.bin2. Insert the above memory card into the camera, and set a fully charged battery in the camera.3. Press the [power button] while holding [MENU] depressed. Keep holding [MENU] depressed until“PROGRAM UPDATE” appears in the display.• The following appears.• The version of the firmware in the memory card appears at the bottom of the display.PROGRAM UPDATEYESNONEW VERSION ISVER 1.02(As of Dec 2005)NOTE 1) When a wrong software is mistakenly used,the message below appears. Update thefirmware again with the correct software.FILE ERROR!NOTE 2) When only the version appears in the displayeven though you are trying to operate thecamera, charge the battery to the fullest andtry again. The level of the battery indicatorshould be highest in order to update thefirmware.4. Align the white cursor to [YES] by [UPPER] and [DOWN], and then press [SET].• “NOW LOADING” appears in the display and the update starts.5. “COMPLETE” appears after the update finishes.6. Remove the memory card after turning the power off once. Turn the power back on again while holding[MENU] depressed, and check the version.• “VER.1.02” appears.VER 1.02(As of Dec 2005)7. If the version is correct, turn the power off.8. Finally, check the operation by recording, playing back and deleting an image.— 7 —
Page 2 and 3: CONTENTSSPECIFICATIONS ............
Page 4 and 5: DeleteSingle-file, all files (with
Page 6 and 7: Rechargeable Lithium Ion Battery (N
Page 10 and 11: 2. How to restore the firmware1. Pr
Page 12 and 13: ADJ TOOL■ IntroductionMake sure t
Page 14 and 15: 2. How to use ADJ Tool when replaci
Page 16 and 17: VCOM DC ADJUSTMENT■ PurposeReadju
Page 18 and 19: 3. Measurementa) Connect S2281-01 t
Page 20 and 21: DISASSEMBLY■ To remove the case1.
Page 22 and 23: 9. Remove the switch unit.The switc
Page 24 and 25: EXPLODED VIEW1S32451-21-1S5 ✕531-
Page 26 and 27: N ItemPartsQTYPriceParts NameSpecif
Page 28 and 29: MAIN PCB (BOTTOM VIEW)— 26 —
Page 31 and 32: — 29 —MAIN PCB (3/3)PWCTL0PWCTL

Casio Exilim EX-S500 Service Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?