Basic Ohm's Law & Series and Parallel Circuits

ENGINEERING lAB 15. Fill up the measured values in Table 1d-2.Analysis, deductions and conclusions:1. Have the aims been achieved?2. What are the facts supporting these decision for each point of the aim?3. What are the probable factors, which contributed to the discrepancies in the results for eachpoint of the aim?4. Indicate which circuit the principle of voltage division and current division is applicable to.5. State the formula for each condition.Pspice Analysis 21. Using PSpice and utilising the measured voltage supply and components values, display thevoltages and current values as shown in Figure 2-1a. Record the values in Table 1d-3.Assign proper titles to the schematics for submission.Figure 2-1a2. Using PSpice and utilising the measured voltage supply and components values, displaythe voltages and current values for Figure 2-2. Record the values in Table 1d-4. Assignproper titles to the schematics for submission.9