Terminal Emulation Client User Guide - Wavelink

Chapter 3: Configuring Host Profiles 17NOTE: If you want to copy a host profile from one device configuration (or Avalanchepackage) to another, you can export it. For instructions, see Exporting and ImportingSettings on page 9.To create or modify a host profile:1 Access the Host Profiles dialog box.2 To create a new host profile, click New. To modify an existing host profile, select theprofile from the list.Various tabs appear in the Host Profiles dialog box that allow you to configure theparameters for a new host profile. The tabs that appear are dependent on the type ofemulation that you select for the host profile. For information about the various tabs in theHost Profiles dialog box, see Host Profile Configuration Options on page 17.3 Use the tabs in the Host Profiles dialog box to configure the host profile.4 If you want to delete a host profile, select it from the list and click Delete.5 After you have finished configuring host profiles, click OK.The host profile configuration is saved.6 Download the host profile configuration to the mobile device.NOTE: For information about downloading configurations to mobile devices, seeConfiguring and Deploying the TE Client on page 4.Host Profile Configuration OptionsThis section describes the options available in the tabs in the Host Profiles dialog box. The tabsmay include:• Host Tab• TermProxy Tabs• IBM Settings Tab• VT Settings Tab• HTTP or HTTPS Proxy Tabs• Access List Tab• Autologin Settings• AutoLaunch Tab• Configuration Tab