Terminal Emulation Client User Guide - Wavelink

Chapter 3: Configuring Host Profiles 19TypeAddressPortOnly UseTermProxyConnectionsThe type of emulation that the mobile device uses when connected to the hostsystem.The IP address or host name of the host system to which the mobile device willconnect.The TCP port number on which the host system is listening for emulationrequests from Clients.Indicates whether the TE Client should only connect to the host through aTermProxy or ConnectPro server. If you enable this checkbox, you mustconfigure the host information (name, IP address, emulation type, and port)and you must also configure the TermProxy 1 tab.Use SSL/TLSEncryptionIndicates whether the TE Client should use SSL/TLS to connect to the hostsystem. When you enable SSL/TLS, the port will automatically change to 992.VerifyServerCertificatesSelectVerificationCertificatesUse SSHencryptionIndicates whether the TE Client should use certificate verification beforeallowing a connection to the host. If you enable certificate verification, clickSelect Verification Certificates to use the Certificate Manager to importtrusted server certificates and/or create your own certificates.Click this button to access the Certificate Manager, which allows you to importtrusted server certificates and/or create your own server certificates forSSL/TLS certificate verification.Enable this option if you want to use SSH to encrypt the data between theConnectPro or TermProxy server and the host. If you enable this option, theUse SSL/TLS encryption option will disable.TunnelTelnet usingSSH LocalPortForwardingNOTE: Terminal Emulation supports both SSH1 and SSH2.Enable this option if you want to use a Telnet connection tunneling through aSSH server.AddressPortEnter the IP address of the SSH host that will perform the tunneling.Enter the port of the SSH host that will perform the tunneling.