Terminal Emulation Client User Guide - Wavelink

Chapter 3: Configuring Host Profiles 34Host Profiles and Wavelink ConnectPro or TermProxyThe TE Client provides integration with Wavelink ConnectPro (known in earlier versions asTermProxy). ConnectPro provides proxy services to assist in session persistence between theClient and host systems. ConnectPro is free when you are using Terminal Emulation.NOTE: For more information about Wavelink TermProxy or ConnectPro, see the productreference guides.When you use ConnectPro or TermProxy, use the host profile to configure how the Client willuse it. Each host profile has the following options:• Configuring a ConnectPro- or TermProxy-Only Host Profile• Configuring ConnectPro/TermProxy FailoverNOTE: TermProxy support via the Host Profiles dialog box is only available in version 5.0(and newer) of Terminal Emulation. While TermProxy 2.x allows connections from any typeof TE Client, TermProxy 3.x or ConnectPro requires a 5.0 (or newer) Client.Configuring a ConnectPro- or TermProxy-Only Host ProfileIf the host profile has a ConnectPro or TermProxy server specified in the TermProxy tab, theClient will try to connect to the proxy server first. When the TE Client cannot connect to thespecified proxy server, it will attempt a direct connection to the host. You can configure theClient so that it will only allow connections to the host through a proxy server, however.To configure a TermProxy-only connection to a host system:1 Access the Host Profiles dialog box.2 Select the host profile that you want to configure.3 In the Host tab, enable the Only Use TermProxy Connections checkbox.