IDS 1600 - Adt

IDS1600 USER MANUAL9.0 Emergency Evacuation PlanAn emergency evacuation plan should be established in case of a fire:Draw up a floor plan of your premises showing windows, doors,stairs and rooftops that can be used for escape.Indicate a suitable escape route for each room. Alwayskeep these routes free of obstruction.Establish a meeting place outdoors for a headcount of thebuilding’s occupants.Practice escape procedures.10. System Memory10.1 Alarm Memory:The Alarm Memory displays any zones which were violated orbypassed the last time the system was armed. If the ARMED indicatoris flashing before you disarm the system, a violation has occurred. Toview which zone was violated, disarm the panel and continue asindicated below.To Display Alarm Memory:[0](Hold down the key until the keypad buzzer sounds)1. Hold down [0] until the keypad buzzer sounds.2. The READY indicator will extinguish and the keypad buzzer willsound briefly.3. Flashing zone indicators show which zones were violatedduring the last armed period.Z O N E 4W A S V I O L A T E DARMTROUBL E4. The bypassed zones will have constantly illuminated indicators.5. The memory status will be displayed for five seconds, or until theIDS1600 USER MANUAL NO. 700-146-01D ISSUED NOV 2002 VER 2.17 25