IDS 1600 - Adt

IDS1600 USER MANUALGlossaryAlarmMemoryArmBypassDisarmEntry/ ExitZoneFollowerZoneInstantZoneStay ArmStay Armand GoStay ZoneZoneThis is the history of the most recent violations thatoccurred the last time the system was armed.To set the system into the ARMED mode. In this mode,violating a zone will activate an alarm condition. If thesystem is programmed accordingly, will cause a reportingcode to be sent to the monitoring company.To deactivate a zone. When the panel is ARMED,violation of a bypassed zone will be ignored.To deactivate the system. Fire, medical and panicfunctions remain active while the system is disarmed.A zone with a programmable time delay, which allows theuser to exit the premises after arming the system andtime to reach the keypad after entering the armedpremises. This zone is generally the last exit point of thebuilding and the first entry point i.e. the front door of ahome.A zone that may be temporarily violated either during theexit delay period or after violation of an entry/ exit zone.This allows the user access to disarm the system. AFollower zone will behave as per an Instant zone ifviolated prior to the violation of an entry/ exit zone.When the system is armed, violation of an instant zonewill immediately cause an alarm condition to beregistered.Arming that allows for certain preprogrammed, STAYzones to be violated while the system is armed.Arming that allows the user to STAY ARM and leave thepremises.Zones which are bypassed automatically when thesystem is STAY ARMED.A specific area of your premises guarded by sensorswhich detect violations of that area.IDS1600 USER MANUAL NO. 700-146-01D ISSUED NOV 2002 VER 2.17 5