BEST 9K Series Service Manual - Locksmith Security Association of ...

Service and Maintenance3. Unscrew the two through-bolts, as shown in Figure 3.6. Save thethrough-bolts.Through-boltLinerThrough-boltFigure 3.6Removing the two through-bolts4. Slide the liner off of the sleeve.To replace the inside rose and rose liner:1. Align the holes in the liner with the holes prepared in the door.2. Install the two through-bolts through the liner and door in the topand bottom holes.3. Tighten the liner onto the door with the through-bolts.4. Replace the lever. See page 3–3Through-boltRoseRose linerThrough-boltFigure 3.7Replacing the inside rose and rose linerReplacing theoutside roseand linerassemblyTo remove the outside rose and liner assembly:1. Remove the following components:■ levers (page 3–3)■ inside rose and rose liner (page 3–4).9K Series Service Manual 3–5