BEST 9K Series Service Manual - Locksmith Security Association of ...

More documents

Recommendations

Info

Service and MaintenanceTo replace the button assembly:1. Insert the new button assembly into the sleeve, as shown inFigure 3.11, until the tab lines up with the cutout in the sleeve. Itmay be necessary to slightly press in the retractor with your thumbso that the locking bar can properly align itself through the chassisand into the key release cam assembly.Note: The button assembly should not pop out of the sleeve. If itdoes, it is misaligned and will not function properly.Sleeve cutoutButton assembly tabFigure 3.11Inserting the button assembly into the sleeve2. Insert a small screwdriver into the cutout in the sleeve and underthe button assembly tab. Bend the tab into the cutout, as shown inFigure 3.12.Note: Do not bend the tab so that it protrudes further than thediameter of the sleeve. It could interfere with the lever function.SleeveButton assemblyButton assembly tabFigure 3.12Bending the button assembly tab3–8 9K Series Service Manual
Service and Maintenance3. Replace the following components:■ roses and rose liners (page 3–4 or page 3–5)■ levers (page 3–3).Replacing thelever keeperspringTo remove the lever keeper spring:1. Remove the following components:■ levers (page 3–3)■ roses and rose liners (page 3–4 and page 3–5)■ button assembly, if present (page 3–7).2. Using a pair of needle-nosed pliers, reach into the sleeve and removethe lever keeper spring, as shown in Figure 3.13.Lever keeper springSleeveFigure 3.13Removing the lever keeper springTo replace the lever keeper spring:1. Position the lever keeper spring as shown in Figure 3.14.SleeveLever keeper springFigure 3.14Positioning the lever keeper spring9K Series Service Manual 3–9
Page 2:
CREDITS/COPYRIGHT© 2000-2002 Best
Page 6 and 7:
Contentsvi9K Series Service Manual
Page 9:
FiguresPositioning the lever return
Page 12 and 13:
Getting StartedDOCUMENTATION PACKAG
Page 14 and 15:
Getting Started1-4 9K Series Servic
Page 16 and 17:
Functions and Parts ListsFUNCTION D
Page 18 and 19:
Functions and Parts ListsDouble-key
Page 20 and 21:
Functions and Parts ListsNon-keyedf
Page 22 and 23:
Functions and Parts ListsRZ-Closet
Page 24 and 25:
2-10 9K Series Service ManualSTANDA
Page 26 and 27: 2-12 9K Series Service ManualD FUNC
Page 28 and 29: 2-14 9K Series Service ManualG FUNC
Page 30 and 31: 2-16 9K Series Service ManualL FUNC
Page 32 and 33: 2-18 9K Series Service ManualNX FUN
Page 34 and 35: 2-20 9K Series Service ManualR FUNC
Page 36 and 37: 2-22 9K Series Service ManualT FUNC
Page 38 and 39: 2-24 9K Series Service ManualY FUNC
Page 40 and 41: 2-26 9K Series Service ManualB FUNC
Page 42 and 43: 2-28 9K Series Service ManualDZ FUN
Page 44 and 45: 2-30 9K Series Service ManualIN FUN
Page 46 and 47: 2-32 9K Series Service ManualM FUNC
Page 48 and 49: 2-34 9K Series Service ManualRD FUN
Page 50 and 51: 2-36 9K Series Service ManualXD FUN
Page 52 and 53: 2-38 9K Series Service ManualYD FUN
Page 54 and 55: 2-40 9K Series Service ManualZ FUNC
Page 56 and 57: Functions and Parts ListsStandard f
Page 58 and 59: Functions and Parts ListsTRIM PARTS
Page 60 and 61: Functions and Parts ListsRoses, ros
Page 62 and 63: Functions and Parts Lists13245Figur
Page 64 and 65: Functions and Parts Lists14235Figur
Page 66 and 67: Functions and Parts ListsLatches152
Page 68 and 69: Functions and Parts Lists1234Figure
Page 70 and 71: Service and MaintenanceMAINTENANCE
Page 72 and 73: Service and Maintenance3. Turn the
Page 74 and 75: Service and Maintenance2. Slide the
Page 78 and 79: Service and Maintenance2. Use a pai
Page 80 and 81: Service and MaintenanceTo replace t
Page 82 and 83: Service and Maintenance8. Align the
Page 84 and 85: Service and MaintenanceTo replace t
Page 86 and 87: Service and Maintenance4. Align the
Page 88 and 89: Service and MaintenanceCAM POSITION
Page 90 and 91: Service and MaintenanceEMERGENCY KE
Page 92 and 93: Service and Maintenance3-24 9K Seri
Page 94 and 95: Installation InstructionsA-2 9K Ser
Page 96 and 97: until the proper door thickness gro
Page 98 and 99: For double dummy trim1 Install the
Page 100 and 101: 4 Install the support ring.Support
Page 102 and 103: IndexDZ chassisfunction conversion
Page 104: Indexreinstalling 3-16removing 3-15
show all

BEST 9K Series Service Manual - Locksmith Security Association of ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?