11.07.2015 Views

Dension audio video router installation guide - GSM Server.com

Dension audio video router installation guide - GSM Server.com

Dension audio video router installation guide - GSM Server.com

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

4Aftermarket connectionsMOSTringGateway 500USB<strong>Dension</strong> AVR <strong>installation</strong> <strong>guide</strong>GWVIDEO INREVERSECAMERARight (Red)Centre (White)Left (Yellow)+12V switched poweroutput for camerasRSEScreen & AudioAV OUTTO RSEAV IN 2MOSTringHead UnitRadioAV OUTTO HUAVRIROptional IR eyeiPodiPod+12V Power inAV IN 1DVD PlayerOptinal Externalremote(White, Yellow)Reverse Geardetect (Green)Handbraketrigger(Red/White)CAROptional remote control to DVD(Yellow, Blue)Optional +12V switchedpower output for DVDAV out to HU: Connects to the Video input on the OE head unit.Audio outputs are left unconnected in case of Gateway 500.Video In: The original <strong>video</strong> signal from factory TV-Tuner or factoryrear view camera is connected here. This signal is routed to thehead unit when the Gateway is in Bypass mode.AV out to RSE: This is an output for rear seat entertainment, i.e.an extra screen. This is to be connected as per the manufacturer’s<strong>guide</strong>lines. The input can alternate between DVD, iPod and AUXinputs.Handbrake trigger: This must be connected to the control switchof the handbrake (a relay may be required if the switch has apositive trigger).Reverse Camera: This camera <strong>video</strong> input allows three aftermarketcameras to be connected to your OEM system. If one camera isused, the connector labelled as Center is used. In case of BMW onlyone camera is supported.Need more help? Visit www.dension.<strong>com</strong>/supportReverse Gear detect: If rear view cameras are connected usuallythe AVR can detect reverse gear through CAN bus. In this case thiswire is left unconnected.If for some reason the reverse gear cannot be detected this wireshould be connected to the reverse gear switch (positive trigger).AV IN 1 input: Allows you to connect an aftermarket DVD sourceto the OEM system. The connections consist of an Audio Left /Right with a Video input. An IR remote output is available if youraftermarket equipment supports this.Optional IR eye: Enables you to control a DVD player via theoriginal remote control (model specific).AV IN 2 input: Allows you to connect any media source with<strong>com</strong>posite <strong>video</strong> output to your vehicle’s OEM system, for examplea digital camera or a gaming console. Connections: Female phonoAudio Left / Right with a Video input.AVR-9202-2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!