CompleteSpecManual - California Paints
CompleteSpecManual - California Paints
CompleteSpecManual - California Paints
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Table Of ContentsProduct #Product NameInterior <strong>Paints</strong> - LatexPg# Product # Product Name Pg #Interior <strong>Paints</strong> - Latex (Continued)501XX Preference Flat 3 56500 Sand Finish 100% Acrylic 29502XX Preference Semi Gloss 4 631XX ENVIROTECH Zero VOC Eggshell 30508XX ProPaint Flat 5 633XX ENVIROTECH Zero VOC Flat 31509XX ProPaint Eggshell 6 663XX ENVIROTECH Zero VOC Semi Gloss 32510XX ProPaint Semi Gloss 7 731XX flawless ELEMENTS Zero VOC Eggshell 33512XX Kitchen & Bath Eggshell Enamel with Microban 8 733XX flawless ELEMENTS Zero VOC Flat 34513XX Kitchen & Bath Semi-Gloss Enamel with Microban 9 736XX flawless ELEMENTS Zero VOC Pearl 3554500 Prime Touch Professional Acrylic Latex Primer/Sealer 10 763XX flawless ELEMENTS Zero VOC Semi Gloss 3651600 Contractor Latex Flat 1151700 Contractor Latex Semi-Gloss 12 210XXInterior <strong>Paints</strong> - AlkydFres~Coat Alkyd Semi-Gloss Rust Preventative forMetal Substrates 37529XX Ultraplate Waterborne Enamel 13 219XX NexTech Alkyd Satin Finish Enamel 38531XX Fres~Coat UNITE Paint + Primer in One Eggshell 14 220XX NexTech Alkyd Semi-Gloss Enamel 39532XX Fres~Coat UNITE Paint + Primer in One Matte 15 23500 ProPaint Alkyd Semi-Gloss White 40533XX Fres~Coat UNITE Paint + Primer in One Flat 16Interior Primers- Latex536XX Fres~Coat UNITE Paint + Primer in One Satin 17 50000 Preference Primer 41563XX Fres~Coat UNITE Paint + Primer in One Semi-Gloss 18 50300 Prime Choice All Surface Acrylic Primer 42551XX 2010 Super-Scrub Ceramic Eggshell With Microban 19 50500 Grip Coat Acrylic Bonding Primer 43551962010 Super-Scrub Ceramic Eggshell With Microban RedBase 20 50600 Prime Choice Universal Primer Sealer 44552XX 2010 Super-Scrub Ceramic Semi-Gloss With Microban 21 50695 Prime Choice Unv Primer Sealer Neutral Base 45553XX 2010 Super-Scrub Ceramic Matte With Microban 22 51500 ProPaint Block Filler 46556XX CalPro 2000 Acrylic Latex Flat 23 52401 Prep'n Size II w/ Microban 47557XX CalPro 2000 Acrylic Latex Eggshell 24 52500 Wipe Out Latex Stain Block White 48558XX CalPro 2000 Acrylic Latex Semi-Gloss 25 54400 Contractor Primer 49559XX Pacific Semi-Gloss 26 54500 Prime Touch Professional Primer Sealer 50560XX Pacific Flat 27 56600 Prime Choice All Wall and Trim Primer 51561XX Pacific Eggshell 28
Product #Product NameInterior Primers- Latex (Continued)Pg# Product # Product Name Pg #564600 Envirotech Zero VOC Interior Primer White 52 22700 Trouble Shooter Fast Drying Alkyd Primer 8674600 flawless Elements Zero VOC Interior Primer White 53 23100 Pacific Exterior Primer Alkyd - White 87Interior Primers- Latex (Continued)Exterior Pimers - Specialty20200 Prime Choice Alkyd Primer Undercoater 54 221XX Everlife Alkyd Primer 8820700 Prime Choice Low Odor Alkyd Primer 55 50500 Grip Coat Acrylic Bonding Primer 89Interior Primers- Speciatly521XX Everlife Waterborne Primer 90221XX Everlife Alkyd Primer 56 52500 Wipe Out Latex Stain Block 9150500 Grip Coat Acrylic Bonding Primer 57 58300 STOPZ Mold & Mildew Eliminator Primer 9251500 ProPaint Block Filler 58Enamels - Interior521XX Everlife Waterborne Primer 59 529XX Ultraplate Waterborne Enamel 9352401 Prep n' Size II w/ Microban 60Enamels - Interior / Exterior52500 Wipe Out Latex Stain Block 61 221XX Everlife Urethane Enamel 9458300 STOPZ Mold & Mildew Eliminator Primer 62 528XX Wear-All Multi Purpose Acrylic Enamel 95Ceiling Whites242XX Wear-All Alkyd Gloss Enamel 9653900 Contractor Ceiling White 63 521XX Everlife Waterborne Enamel 9754000 Pacific Acrylic Ceiling Paint 64 530XX Allflor Acrylic Epoxy Floor Enamel 9854100 Diamond Acrylic Ceiling Paint 65 Specialty Products - <strong>California</strong> Performance Coatings55500 Pro2000 Ceiling Paint 66 58000 Weatherplate Clear Waterproofing Sealer 9970401 Ox-O-Flow Cal Coater 67 58350 STOPZ Mildew Eliminating Waterproofer 10074100 flawless Elements Zero VOC Ceiling White 68 65XX Skid Grip Anti-Slip Surface 101Exterior <strong>Paints</strong> - LatexSpecialty Products - Industrial Coatings - Epoxy Products400XX 2010 100% Acrylic Velvet Flat Exterior 69 12XX Tile-Coat Polyamide Epoxy Coating 102401XX 2010 100% Acrylic Eggshell Exterior 70 15XX Tuf-On Waterborne Epoxy Gloss Enamel 103402XX 2010 100% Acrylic Satin Gloss Exterior 71 Specialty Products - Industrial Coatings - Latex Products450XX Fres~Coat 100% Acrylic Velvet Flat Exterior 72 10XX Rust Stop DTM 100% Acrylic Latex Semi Gloss 104455XX Fres~Coat Latex Low Luster Exterior 73 1061,64,67Rust Stop DTM Acrylic Latex Flat Primer/Finish 105460XX Pacific Latex Low Luster Exterior 74 37XX Dryfall Economy Latex Flat 106462XX Pacific Satin Gloss Exterior 75 3751 Mason-Cote 100% Acrylic Block Filler 107463XX Pacific Latex Flat Exterior 76 7007 Stonite Masonry Conditioner Acrylic 108471XX Fres~Coat Acrylic Satin Gloss Exterior 77 Specialty Products - Industrial Coatings - Alkyd Products210XX Fres~Coat Alkyd Exterior 78 242XX Wear All Alkyd Gloss Enamel 109219XX NexTech Alkyd Satin Finish Enamel 79 7110 Lacrylic Solvent Acrylic Clear 110220XX NexTech Alkyd Semi-Gloss Enamel 80Specialty Products - Traffic, Athletic &Pool221XX Everlife Urethane Enamel 81 1001 Grid Stripe Latex Field Marking 111Exterior Primers - Latex1006 Economy Latex Field Marking Paint 11245100 Trouble Shooter Acrylic Primer - White 82 1081,5 Traffic & Zone Marking Paint 11345101 Trouble Shooter Acrylic Primer - Gray 83 24XX Acrylic Pool Paint 11446100 Pacific Exterior Primer Latex - White 84 60XX Hi Hide Line Marking Paint 11550600 Prime Choice Universal Primer 85
Product Description:InteriorThis economical quick-dry latex flat hides well on most new or previously painted interior surfaces.Recommended Use:Sheetrock, wallboard, concrete, masonry block.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Preference Flat is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal, Galvanized Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Preference Flat 501XX▪ Concrete, Non-Porous Masonry:2 coats Preference Flat 501XX▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Preference Flat 501XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Preference Flat 501XX▪ Wood:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats Preference Flat 501XX▪ Acoustical Tile:2 coats Preference Flat 501XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. If second coat is required, use only PreferenceLatex in the same sheet as first coat.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Preference Flat501XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 32.3 % ±2Solids by Weight: 52.8 % ±2Vehicle: 53.8 % ±2Pigment: 46.2 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:105KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:White Pastel6 ColorsAvailable Package Sizes:Gallon 5 Gallon(Weight Per Gallon: 12.0 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 6 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400 s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis economical quick-dry latex semi-gloss hides well on most new or previously painted interior surfaces.Recommended Use:Sheetrock, wallboard, concrete, masonry block.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Preference Semi-Gloss is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Architectural Specifications:▪ Wallboard, Sheetrock:2 coats Preference Semi-Gloss 502XX▪ Concrete, Non-Porous Masonry:2 coats Preference Semi-Gloss 502XX▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Preference Semi-Gloss 502XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Preference Semi-Gloss 502XX▪ Wood:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats Preference Semi-Gloss 502XX▪ Acoustical Tile:2 coats Preference Semi-Gloss 502XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. If second coat is required, use only PreferenceLatex in the same sheet as first coat.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Preference Semi-Gloss502XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 23.5 % ±2Solids by Weight: 33.9 % ±2Vehicle: 82.3 % ±2Pigment: 17.7 % ±2Dry Film Thickness: 1 milsViscosity @ 77 °F: 97KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastel5 StockAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 9.7 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorProPaint Flat is a smooth flowing washable flat finish formulated for most wall surfaces in homes, apartments,commercial and public buildings. This versatile product provides high hiding and excellent application characteristicson new or previously painted surfaces.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, primed galvanized metal, acousticalsurfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.ProPaint Flat is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal, Galvanized Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats ProPaint Flat 508XX▪ Concrete, Non-Porous Masonry:2 coats ProPaint Flat 508XX▪ Porous Masonry and Block:1 coat ProPaint Block Filler 515001 or 2 coats ProPaint Flat 508XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats ProPaint Flat 508XX▪ Galvanized Metal:1 coat Larcoloid Acrylic Latex Rust Inhibiting Metal Primer, White 51106, Gray 51108, Red 511071 or 2 coats ProPaint Flat 508XX▪ Wood:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats ProPaint Flat 508XX▪ Acoustical Tile:2 coats ProPaint Flat 508XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012ProPaint® Flat508XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 30.6 % ±2Solids by Weight: 50.6 % ±2Vehicle: 57.0 % ±2Pigment: 43.0 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:108KU ± 3Maximum VOC: 50 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:NeutralPastelDeepSuper Hide White5 StockMediumAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.7 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 325-375s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorProPaint Eggshell is a smooth flowing low lustre eggshell enamel formulated to provide excellent washability anddurability to ceiling and wall surfaces. It’s antispatter formulation makes for easy application in homes, schools,commercial and institutional buildings.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, primed metal, primed galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.ProPaint Eggshell is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal, Galvanized Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats ProPaint Eggshell 509XX▪ Concrete, Non-Porous Masonry:2 coats ProPaint Eggshell 509XX▪ Porous Masonry and Block:1 coat ProPaint Block Filler 515001 or 2 coats ProPaint Eggshell 509XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats ProPaint Eggshell 509XX▪ Galvanized Metal:1 coat Larcoloid Acrylic Latex Rust Inhibiting Metal Primer, White 51106, Gray 51108, Red 511071 or 2 coats ProPaint Eggshell 509XX▪ Wood:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats ProPaint Eggshell 509XX▪ Acoustical Tile:2 coats ProPaint Eggshell 509XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012ProPaint® Eggshell509XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 7 @ 60° ± 2Volume Solids: 22.3 % ±2Solids by Weight: 34.9 % ±2Vehicle: 78.0 % ±2Pigment: 22.0 % ±2Dry Film Thickness: 1.1 milsViscosity @ 77 °F: 99KU ± 2Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:NeutralPastelDeepSuper Hide White5 StockMediumAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 9.9 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 225-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorKitchen & Bath Eggshell Enamel is an extremely durable 100% acrylic latex eggshell finish developed to withstand themoist, humid conditions in bathrooms and kitchens. The anti-spatter formulation flows on easily, hides well and levelsbeautifully to provide the ultimate in durability and mildew resistance. Kitchen & Bath Eggshell Enamel can be appliedto most surfaces in any area of homes, commercial or industrial buildings requiring maximum moisture and mildewresistance.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Premium Kitchen & Bath Eggshell Enamel is self-priming over bare sheetrock, composition board, ceiling tile andconcrete.5/31/2012Kitchen & Bath Eggshell Enamel512XXProduct Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 14@ 60° ± 4Volume Solids: 39.5 % ±2Solids by Weight: 54.3 % ±2Vehicle: 68.3 % ±2Pigment: 31.7 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F:103KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelNew Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid Rust Inhibiting Metal PrimerWood - Seal knots and stains with Wipe-Out, Wipe-Out Low Odor or Wipe-Out 100% Acrylic Stain BlockMasonry Block - Apply one coat of Mason-Cote Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Kitchen & Bath Eggshell Enamel▪ Concrete, Non-Porous Masonry:2 coats Kitchen & Bath Eggshell Enamel▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Kitchen & Bath Eggshell Enamel▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Kitchen & Bath Eggshell EnamelPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Package Sizes:Quart Gallon(Weight Per Gallon: 11.1 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400 s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorPremium Kitchen & Bath Semi-Gloss Enamel is an extremely durable 100% acrylic latex semi-gloss finish developedto withstand the moist, humid conditions in bathrooms and kitchens. The anti-splatter formulation flows on easily, hideswell and levels beautifully to provide the ultimate in durability and mildew resistance. Premium Kitchen & Bath Semi-Gloss Enamel can be applied to most surfaces in any area of homes, commercial or industrial buildings requiringmaximum moisture and mildew resistance.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Premium Kitchen & Bath Semi-Gloss Enamel is self-priming over bare sheetrock, composition board, ceiling tile andconcrete.5/31/2012Kitchen & Bath Semi-Gloss Enamel513XXProduct Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 36.8 % ±2Solids by Weight: 50.4 % ±2Vehicle: 74.7 % ±2Pigment: 25.3 % ±2Dry Film Thickness: 1.6 milsViscosity @ 77 °F:103KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelNew Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Wipe-Out®, Wipe-Out Low Odor or Wipe-Out 100% Acrylic Stain Block.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Premium Kitchen & Bath Semi-Gloss Enamel 513XX▪ Concrete, Non-Porous Masonry:2 coats Premium Kitchen & Bath Semi-Gloss Enamel 513XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Premium Kitchen & Bath Semi-Gloss Enamel 513XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Premium Kitchen & Bath Semi-Gloss Enamel 513XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Premium Kitchen & Bath Semi-Gloss Enamel 513XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Premium Kitchen & Bath Semi-Gloss Enamel 513XXAcoustical Tile:2 coats Premium Kitchen & Bath Semi-Gloss Enamel 513XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Package Sizes:QuartGallon(Weight Per Gallon: 10.6 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorPrime Touch Acrylic Latex Primer / Sealer is a professional grade interior primer-sealer for unpainted walls andceilings that may be porous or absorbent. This quick drying product makes an excellent base-coat for alkyd, oilmodifiedpolyurethane or latex finish coats. The fast drying of this undercoater allows the primer and finish coat to beapplied on the same day.Recommended Use:For properly prepared interior surfaces such as plaster, sheetrock and wallboard, masonry block, and ceiling tile.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.We highly recommend the use of 100% acrylic primers for use on unpainted plaster, however, when costconsiderations make it impractical to use this type of primer certain steps should be taken to minimize the possibility ofpaint failure. Plaster should be thoroughly dry and should be allowed to cure for at least 7 to 10 days before priming.Washing the plaster with clean water or a mixture of 1 pint white vinegar per gallon of water before priming is also agood idea, as this will neutralize any surface alkali which could cause peeling or discoloration of the primer and orfinish coat.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.5/31/2012Prime Touch Professional Acrylic LatexPrimer/Sealer 54500Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.3 % ±2Solids by Weight: 51.6 % ±2Vehicle: 55.2 % ±2Pigment: 44.8 % ±2Dry Film Thickness: 1.6 milsViscosity @ 77 °F:100KU ± 5Maximum VOC: 200 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteTint WhiteWax, grease and oil should be removed from the substrate with mineral spirits applied with a cloth. Taped joints onsheetrock should be sanded smooth with care being exercised to avoid abrading the surrounding paper backing.Wash new plaster with clean water, rinsing rags or sponges frequently. Plaster nibs on new plaster should be knifedoff but plaster should not be sanded until after the surface has been primed. Fill all voids with prepared vinyl patchingcompound, allow to dry and sand even with the adjacent surfaces.Architectural Specifications:▪ New or Unfinished Plaster, Wallboard, Sheetrock, Concrete:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats <strong>California</strong> <strong>Paints</strong> acrylic in desired finishPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Prime Touch Professional Acrylic LatexPrimer/Sealer should not be exposed to freezing temperatures while it is curing. Do not use this product under 2-component paints such as epoxies or urethanes. This product should not be used in areas subjected to constantdampness such as bathrooms, cellars and pool areas. Where there are concerns for applications that demonstratehigh alkalinity or "hot plaster" or in areas where moist or damp exposures are expected use Prime Choice 50300 AllSurface 100% Acrylic Latex Primer. This product may raise the grain of open grain woods.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Package Sizes:Gallon 5 Gallon(Weight Per Gallon: 11.9 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 6-8 hrs.To Recoat: 2-4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-425 s.f./gal.Porous: 200-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis economical quick-dry latex hides well on most new or previously painted interior surfaces.Recommended Use:Sheetrock, wallboard, masonry block.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Contractor Latex Flat is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Architectural Specifications:▪ Wallboard, Sheetrock:2 coats Contractor Latex Flat 516XX▪ Concrete, Non-Porous Masonry:2 coats Contractor Latex Flat 516XX▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Contractor Latex Flat 516XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Contractor Latex Flat 516XX▪ Wood:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545002 coats Contractor Latex Flat 516XX▪ Acoustical Tile:2 coats Contractor Latex Flat 516XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. If a second coat is required, use only PreferenceLatex in the same sheet as first coat.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Contractor Latex Flat51600Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 30.0 % ±2Solids by Weight: 49.8 % ±2Vehicle: 56.5 % ±2Pigment: 43.5 % ±2Dry Film Thickness: 1.3 milsViscosity @ 77 °F:108KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon 5 Gallon(Weight Per Gallon: 11.7 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400 s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis economical quick-dry latex semi-gloss hides well on most new or previously painted interior surfaces.Recommended Use:Sheetrock, wallboard, concrete, masonry block.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Contractor Latex Semi-Gloss is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Architectural Specifications:▪ Wallboard, Sheetrock:2 coats Contractor Latex Semi-Gloss 517XX▪ Concrete, Non-Porous Masonry:2 coats Contractor Latex Semi-Gloss 517XX▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Contractor Latex Semi-Gloss 517XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Contractor Latex Semi-Gloss 517XX▪ Wood:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats Contractor Latex Semi-Gloss 517XX▪ Acoustical Tile:2 coats Contractor Latex Semi-Gloss 517XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Do not use this product under oil base products,first line latex products or products with any degree of gloss.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Contractor Latex Semi-Gloss51700Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 28.1 % ±2Solids by Weight: 39.4 % ±2Vehicle: 80.9 % ±2Pigment: 19.1 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 83KU ± 3Maximum VOC: 100 g/literFlash Pt °F:Non CombustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 9.9 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorUltraplate waterborne enamel is a satin finish acrylic urethane enamel with outstanding hide, leveling & adhesion.Recommended Use:This product was developed to provide a factory like finish when restoring old cabinets, shelving, furniture or many otherinterior surfaces where a smooth & tough coating is desired. Ultraplate’s remarkable adhesive properties make it anexcellent choice for those hard-to-stick to surfaces without need for priming.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Clean up carefully with a HEPA vacuum and wet mop. Before you start, find out how to protect yourselfand your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/leadSurface to be painted must be free of dust, mildew, dirt, grease, wax, loose paint or any other contaminant that mayinhibit good adhesion. Lightly sand hard or glossy surfaces after cleaning & before applying Ultraplate.Ultraplate is ready-to-use as it comes from the can. It may be thinned sparingly with water and may be tinted with up to2 oz. of <strong>California</strong> <strong>Paints</strong>’ Logicolor® or Trillion® colorant. Ultraplate may be applied by a quality synthetic brush, 3/8” orless nap roller, or by spray using HVLP or airless .019-.021 tip. Multiple thin coats are preferred rather than one heavycoat. Check color for accuracy before applying.5/31/2012ULTRAPLATE Waterborne Enamel52900Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 40 @ 60° ±2Volume Solids: 33.2 % ±2Solids by Weight: 45.6 % ±2Vehicle: 78.4 % ±2Pigment: 21.6 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F: 105 KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhitePastelArchitectural Specifications:• Previously painted surfaces; 1 or 2 coats Ultraplate• Bare Wood; No primer necessary, 1 or 2 coats Ultraplate• Plaster, Wallboard, Sheetrock; No primer necessary, 1 or 2 coats Ultraplate• Ferrous Metal; 1 coat Rust Stop® rust inhibiting metal primer, 1 or 2 coats Ultraplate• Concrete; No primer necessary, 1 or 2 coats Ultraplate• Porous concrete, block; 1 coat Mason Cote® block filler, 1 or 2 coats UltraplatePrecautions:Do not add solvents, oils, or mix with other paints. Do not apply when air and surface temperatures are below 50° F orwhen drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Package Sizes:Quart Gallon(Weight Per Gallon: 10.23lbs. ± .5 lb)Drying Times:To Touch: 1/2 hrs.To Handle: 2 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> Products Corporation ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.calprocorp.com ▪ 800-225-1141
Product Description:Paint & Primer in OneInteriorFres~Coat Unite 100% Acrylic Eggshell FinishFres~Coat Unite Paint and Primer in One is a premium smooth flowing, quick drying latex eggshell finish paint that isused for interior walls and woodwork. This product contains a self priming feature that will make any paint job go fasterin less coats and look better than conventional latex paints. Unite Eggshell is a durable anti-spatter finish that willwithstand repeated scrubbing.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Fres~Coat 100% Acrylic Latex Eggshell is self-priming over bare sheetrock, composition board, ceiling tile andconcrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Disposal: For recycling guidance of any unused amount, contact your local or provincial organization of recovery andrecycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.5/31/2012531XXProduct Specifications:Type: *100% Acrylic LatexExposure:InteriorSpecular Gloss: 10@ 60° ± 2Volume Solids: 33.0 % ±2Solids by Weight: 47.2 % ±2Vehicle: 71.7 % ±2Pigment: 28.3 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: 98KU ± 3Maximum VOC: **150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelNeutralMediumDeepBlackSuper Hide WhiteAvailable Package Sizes:Quart Gallon 5 Gallon**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CatergoryA/d: 130 g/l Per EU Method Directive 2004/42/CEArchitectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Fres~Coat Unite 100% Acrylic Eggshell Finish 531XX▪ Concrete, Non-Porous Masonry:2 coats Fres~Coat Unite 100% Acrylic Eggshell Finish 531XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Fres~Coat Unite 100% Acrylic Eggshell Finish 531XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211501 or 2 coats Fres~Coat Unite 100% Acrylic Eggshell Finish 531XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Fres~Coat Unite 100% Acrylic Eggshell Finish 531XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 50300 (see above comments on "New Wood")1 or 2 coats Fres~Coat Unite 100% Acrylic Eggshell Finish 531XX▪ Acoustical Tile:2 coats Fres~Coat Unite 100% Acrylic Eggshell Finish 531XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation. All colors should beapplied on a small area allowed to dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the Pastel Base: 53191(Weight Per Gallon: 10.7 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Paint & Primer in OneInteriorFres~Coat Unite Paint and Primer in One is a premium smooth flowing, quick drying latex flat finish paint that is usedfor interior walls and ceilings. This product contains a self priming feature that will make any paint job go faster in lesscoats and look better than conventional latex paints. Unite Flat is a durable anti-spatter finish.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Fres~Coat 100% Acrylic Latex Flat is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Disposal: For recycling guidance of any unused amount, contact your local or provincial organization of recovery andrecycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CatergoryA/a: 30 g/l Per EU Method Directive 2004/42/CEArchitectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Fres~Coat Unite Acrylic Latex Flat 533XX▪ Concrete, Non-Porous Masonry:2 coats Fres~Coat Unite Acrylic Latex Flat 533XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Fres~Coat Unite Acrylic Latex Flat 533XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211501 or 2 coats Fres~Coat Unite Acrylic Latex Flat 533XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Fres~Coat Unite Acrylic Latex Flat 533XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 50300 (see above comments on "New Wood")1 or 2 coats Fres~Coat Unite Acrylic Latex Flat 533XX▪ Acoustical Tile:2 coats Fres~Coat Unite Acrylic Latex Flat 533XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation. All colors should beapplied on a small area allowed to dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the Pastel Base: 533915/31/2012Fres~Coat Unite 100% Acrylic Flat Finish533XXProduct Specifications:Type: *Vinyl Arcylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 32.3 % ±2Solids by Weight: 49.5 % ±2Vehicle: 63.0 % ±2Pigment: 37.0 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F:108KU ± 3Maximum VOC: **50 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelNeutralMediumDeepBlackSuper Hide WhiteAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Paint & Primer in OneInteriorFres~Coat Unite Paint and Primer in One is a premium smooth flowing, quick drying latex satin finish paint that is usedfor interior walls and ceilings. This product contains a self priming feature that will make any paint job go faster in lesscoats and look better than conventional latex paints. Unite Satin is a durable anti-spatter finish that will withstandrepeated scrubbing.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Fres~Coat 100% Acrylic Latex Satin is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Disposal: For recycling guidance of any unused amount, contact your local or provincial organization of recovery andrecycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.5/31/2012Fres~Coat Unite 100% Acrylic Satin Finish536XXProduct Specifications:Type: *100% Acrylic LatexExposure:InteriorSpecular Gloss: 28@ 60° ± 4Volume Solids: 28.2 % ±2Solids by Weight: 41.5 % ±2Vehicle: 76.5 % ±2Pigment: 23.5 % ±2Dry Film Thickness: 1.1 milsViscosity @ 77 °F: 98KU ± 3Maximum VOC: **150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelNeutralMediumDeepSuper Hide WhiteAvailable Package Sizes:Quart Gallon 5 Gallon**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CatergoryA/d: 130 g/l Per EU Method Directive 2004/42/CEArchitectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Fres~Coat Unite 100% Acrylic Latex Satin Finish 536XX▪ Concrete, Non-Porous Masonry:2 coats Fres~Coat Unite 100% Acrylic Latex Satin Finish 536XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Fres~Coat Unite 100% Acrylic Latex Satin Finish 536XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211501 or 2 coats Fres~Coat Unite 100% Acrylic Latex Satin Finish 536XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Fres~Coat Unite 100% Acrylic Latex Satin Finish 536XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 50300 (see above comments on "New Wood")1 or 2 coats Fres~Coat Unite 100% Acrylic Latex Satin Finish 536XX▪ Acoustical Tile:Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation. All colors should beapplied on a small area allowed to dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the Pastel Base: 53691(Weight Per Gallon: 10.3 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Paint & Primer in OneInteriorFres~Coat Unite Paint and Primer in One is a premium smooth flowing, quick drying latex semi-gloss finish paint thatis used for interior walls and ceilings. This product contains a self priming feature that will make any paint job go fasterin less coats and look better than conventional latex paints. Unite Semi-Gloss is a durable anti-spatter finish that willwithstant repeated scrubbingRecommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal.Fres~Coat Unite 100% Acrylic Semi-Gloss EnamelApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Fres~Coat 100% Acrylic Latex Semi-Gloss is self-priming over bare sheetrock, composition board, ceiling tile andconcrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Disposal: For recycling guidance of any unused amount, contact your local or provincial organization of recovery andrecycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.5/31/2012563XXProduct Specifications:Type: *100% Acrylic LatexExposure:InteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 30.9 % ±2Solids by Weight: 43.6 % ±2Vehicle: 78.5 % ±2Pigment: 21.5 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: 98KU ± 3Maximum VOC: **150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelNeutralMediumDeepBlackSuper Hide WhiteAvailable Package Sizes:Quart Gallon 5 Gallon**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CatergoryA/d: 130 g/l Per EU Method Directive 2004/42/CEArchitectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Fres~Coat Unite100% Acrylic Waterborne Semi-Gloss 563XX▪ Concrete, Non-Porous Masonry:2 coats Fres~Coat Unite 100% Acrylic Waterborne Semi-Gloss 563XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Fres~Coat Unite 100% Acrylic Waterborne Semi-Gloss 563XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211501 or 2 coats Fres~Coat Unite 100% Acrylic Waterborne Semi-Gloss 563XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Fres~Coat Unite 100% Acrylic Waterborne Semi-Gloss 563XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 50300 (see above comments on "New Wood")1 or 2 coats Fres~Coat Unite 100% Acrylic Waterborne Semi-Gloss 563XX▪ Acoustical Tile:2 coats Fres~Coat Unite 100% Acrylic Waterborne Semi-Gloss 563XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation. All colors should beapplied on a small area allowed to dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the Pastel Base: 56391(Weight Per Gallon: 10.2 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGInteriorSuper-Scrub Ceramic Eggshell Finish incorporates the latest technology in its formulation to produce the highestquality, most durable paint on the market today. Super Scrub’s anti spatter formulation sets the standard for ease ofapplication, flow, leveling and adhesion. It provides excellent color retention, moisture resistance and scrubbability,making it the ideal coating for any room in the home, office, or commercial building. Ceramic microspheresincorporated with 100% acrylic waterborne technology make it highly stain resistant. Super Scrub Ceramic 100%acrylic Eggshell contains Microban® antimicrobial protection. This unique additive will inhibit the growth of stain andodor causing bacterial; mold, mildew and other fungal growth on the dried paint film. Microban protection provides anadded level of protection between cleanings, but does not take the place of normal cleaning and disinfectingprocedures and will not protect against food borne illness. Microban additives are E.P.A. registered for use in paint.For more information visit www.microban.com.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure.Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your familyby contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead.Super-Scrub Ceramic Eggshell Finish requires thorough stirring prior to application. Surfaces to be painted must befree of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, and other surface contamination.Patch irregularities with vinyl patching paste or an appropriate patching compound. 2010 Super-Scrub Ceramic MatteFinish is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New Plaster must be fully cured and should be wiped with wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote Block Filler 3751 if a denser surface is desired.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Super-Scrub Ceramic 100% Acrylic Eggshell 551XX▪ Concrete, Non-Porous Masonry:2 coats Super-Scrub Ceramic 100% Acrylic Eggshell 551XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37512 coats Super-Scrub Ceramic 100% Acrylic Eggshell 551XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211502 coats Super-Scrub Ceramic 100% Acrylic Eggshell 551XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Super-Scrub Ceramic 100% Acrylic Eggshell 551XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 50300 (see above comments on "New Wood")2 coats Super-Scrub Ceramic 100% Acrylic Eggshell 551XX▪ Acoustical Tile:2 coats Super-Scrub Ceramic 100% Acrylic Eggshell 551XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the pastel base: 55391**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CategoryA/d: 130 g/l Per EU Method Directive 2004/42/C<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-11415/31/2012Super-Scrub® Ceramic Eggshell FinishWith Microban® 551XXProduct Specifications:Type: *100% Acrylic LatexExposure:InteriorSpecular Gloss: 11@ 60° ± 3Volume Solids: 28.8 % ±2Solids by Weight: 43.4 % ±2Vehicle: 72.7 % ±2Pigment: 27.3 % ±2Dry Film Thickness: 1.1 milsViscosity @ 77 °F: 93KU ± 3Maximum VOC: **150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip
Product Description:Interior or Exterior2010 Super-Scrub Ceramic 100% Acrylic Waterborne Eggshell with Microban Red Base is a super premium eggshellfinish designed to provide superior hiding power for some of the deep colors that typically require 5 to 6 coats*. It isalso ideal as a primer under latex or oil finishes, both interior and exterior, where a sheen other than eggshell isdesired.See the detailed product description of Super Scrub Ceramic Eggshell with Microban on the 551XX specification sheet.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. 2010Super-Scrub Ceramic 100% Acrylic Waterborne Eggshell with Microban Red Base is self-priming over bare sheetrock,composition board, ceiling tile and concrete.Since this product is designed as a base for a number of custom formulas to give them better hiding, 2010 SuperScrub Ceramic Eggshell with Microban Red Base 55196 is packaged in a 12 liq. oz. short-filled gallon to make roomfor additional colorant.*New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats 2010 Super-Scrub Ceramic Eggshell with Microban Red Base 55196▪ Concrete, Non-Porous Masonry:2 coats 2010 Super-Scrub Ceramic Eggshell with Microban Red Base 55196▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37512 coats 2010 Super-Scrub Ceramic Eggshell with Microban Red Base 55196▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211502 coats 2010 Super-Scrub Ceramic Eggshell with Microban Red Base 55196▪ Ferrous Metal - Primed, Galvanized Metal:2 coats 2010 Super-Scrub Ceramic Eggshell with Microban Red Base 55196▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503002 coats 2010 Super-Scrub Ceramic Eggshell with Microban Red Base 55196▪ Acoustical Tile:2 coats 2010 Super-Scrub Ceramic Eggshell with Microban Red Base 55196Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/20122010 Super-Scrub® Ceramic EggshellWith Microban® Red Base 55196Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 12@ 60° ± 2Volume Solids: 32.4 % ±2Solids by Weight: 40.0 % ±2Vehicle: 86.8 % ±2Pigment: 13.2 % ±2Dry Film Thickness: 2 milsViscosity @ 77 °F: 97KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:RedAvailable Package Sizes:QuartGallon(Weight Per Gallon: 9.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or Polyester*Here is a listing of 10 PERFECT PALETTE®** (and 5 HISTORIC) colors whose formulations can have their hidingvastly enhanced by the use of this Red Base No. 55196:PERFECT PALETTE Colors-Cherry Bomb DEA105; Deep Crimson DEA152; Glitzy Red DEA153; Hot Jazz DEA107; Red Contrast DEA106; RedIcon DEA104; Red Ink DEA151; Red Revival DEA154; Scarlet Past DEA150 and Striking Red DEA103HISTORIC Colors-Codman Claret; Redrock Canyon; Richardson Brick; Shaker Red and StagecoachRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 TipContact your Dealer or our Customer Service Department if you would like to obtain these formulas.**The <strong>California</strong> Perfect <strong>Paints</strong> Palette ▪ 150 Color Dascomb System and Rd. ▪ all Andover, rights therein MA ▪ is 01810 property ▪ www.californiapaints.com of Dunn-Edwards Corporation, ▪ 800-225-1141 used under license
Product Description:SELF-PRIMINGInteriorSuper-Scrub Ceramic Semi-Gloss Finish incorporates the latest technology in its formulation to produce the highestquality, most durable paint on the market today. Super Scrub’s anti spatter formulation sets the standard for ease ofapplication, flow, leveling and adhesion. It provides excellent color retention, moisture resistance and scrubbability,making it the ideal coating for any room in the home, office, or commercial building. Ceramic microspheresincorporated with 100% acrylic waterborne technology make it highly stain resistant. Super Scrub Ceramic 100%acrylic Semi-Gloss contains Microban® antimicrobial protection. This unique additive will inhibit the growth of stain andodor causing bacterial; mold, mildew and other fungal growth on the dried paint film. Microban protection provides anadded level of protection between cleanings, but does not take the place of normal cleaning and disinfectingprocedures and will not protect against food borne illness. Microban additives are E.P.A. registered for use in paint.For more information visit www.microban.com.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure.Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your familyby contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead.Super-Scrub Ceramic Semi-Gloss Finish requires thorough stirring prior to application. Surfaces to be painted must befree of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, and other surface contamination.Patch irregularities with vinyl patching paste or an appropriate patching compound. 2010 Super-Scrub Ceramic MatteFinish is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New Plaster must be fully cured and should be wiped with wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote Block Filler 3751 if a denser surface is desired.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Super-Scrub Ceramic 100% Acrylic Semi-Gloss 552XX▪ Concrete, Non-Porous Masonry:2 coats Super-Scrub Ceramic 100% Acrylic Semi-Gloss 552XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37512 coats Super-Scrub Ceramic 100% Acrylic Semi-Gloss 552XX▪ Ferrous Metal - Un-primed:1 coat Rust-Stop® Rust Inhibiting Metal Primer 211501 or 2 coats Super-Scrub Ceramic 100% Acrylic Semi-Gloss 552XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Super-Scrub Ceramic 100% Acrylic Semi-Gloss 552XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 50300 (see above comments on "New Wood")1 or 2 coats Super-Scrub Ceramic 100% Acrylic Semi-Gloss 552XX▪ Acoustical Tile:2 coats Super-Scrub Ceramic 100% Acrylic Semi-Gloss 552XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the pastel base: 55391**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CategoryA/d: 130 g/l Per EU Method Directive 2004/42/C<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-11415/31/2012Super-Scrub® Ceramic Semi-Gloss FinishWith Microban® 552XXProduct Specifications:Type: *100% Acrylic LatexExposure:InteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 30.5 % ±2Solids by Weight: 44.3 % ±2Vehicle: 74.9 % ±2Pigment: 25 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: 98KU ± 3Maximum VOC: **150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.4 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip
Product Description:SELF-PRIMINGInteriorSuper-Scrub Ceramic Matte Finish incorporates the latest technology in its formulation to produce the highest quality,most durable paint on the market today. Super Scrub’s anti spatter formulation sets the standard for ease ofapplication, flow, leveling and adhesion. It provides excellent color retention, moisture resistance and scrubbability,making it the ideal coating for any room in the home, office, or commercial building. Ceramic microspheresincorporated with 100% acrylic waterborne technology make it highly stain resistant. Super Scrub Ceramic 100%acrylic Matte contains Microban® antimicrobial protection. This unique additive will inhibit the growth of stain and odorcausing bacterial; mold, mildew and other fungal growth on the dried paint film. Microban protection provides an addedlevel of protection between cleanings, but does not take the place of normal cleaning and disinfecting procedures andwill not protect against food borne illness. Microban additives are E.P.A. registered for use in paint. For moreinformation visit www.microban.com.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure.Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your familyby contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead.Super-Scrub Ceramic Matte Finish requires thorough stirring prior to application. Surfaces to be painted must be freeof dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, and other surface contamination. Patchirregularities with vinyl patching paste or an appropriate patching compound. 2010 Super-Scrub Ceramic Matte Finishis self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New Plaster must be fully cured and should be wiped with wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote Block Filler 3751 if a denser surface is desired.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock: 2 coats Super-Scrub Ceramic Matte Finish▪ Concrete, Non-Porous Masonry: 2 coats Super-Scrub Ceramic Matte Finish▪ Porous Masonry and Block: 1 coat Mason-Cote® Block Filler 37511 or 2 coats Super-Scrub Ceramic Matte Finish▪ Ferrous Metal - Un-primed: 1 coat Rust Stop® Rust Inhibiting Metal Primer1 or 2 coats Super-Scrub Ceramic Matte Finish▪ Ferrous Metal - Primed, Galvanized Metal:2 coats Super-Scrub Ceramic Matte Finish▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 50300 (see above comments on "New Wood")1 or 2 coats Super-Scrub Ceramic Matte Finish▪ Acoustical Tile:2 coats Super-Scrub Ceramic Matte FinishPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the pastel base: 55391**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CategoryA/a: 30 g/l Per EU Method Directive 2004/42/C5/31/2012Super-Scrub® Ceramic Matte FinishWith Microban® 553XXProduct Specifications:Type: *100% Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 28.2 % ±2Solids by Weight: 44.7 % ±2Vehicle: 68.8 % ±2Pigment: 31.2 % ±2Dry Film Thickness: 1 milsViscosity @ 77 °F: 93KU ± 3Maximum VOC: **50 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.8 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorCal Pro 2000 Series is a smooth flowing anti-spatter flat finish for use on walls and ceilings in homes, apartments,condominiums and commercial applications. Cal Pro 2000 Series is easily applied, dries quickly, and providesexcellent hiding for most new and previously painted surfaces and can be applied by brush, roller or spray.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, primed galvanized metal, acousticalsurfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. CalPro 2000 Series Acrylic Flat is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal, Galvanized Metal - Clean, then prime with Everlife Rust Inhibiting Metal Primer.Wood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Cal Pro 2000 Series Acrylic Flat 556XX▪ Concrete, Non-Porous Masonry:2 coats Cal Pro 2000 Series Acrylic Flat 556XX▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Cal Pro 2000 Series Acrylic Flat 556XX▪ Ferrous Metal - Un-primed:1 coat Everlife Rust Inhibiting Metal Primer 521501 or 2 coats Cal Pro 2000 Series Acrylic Flat 556XX▪ Galvanized Metal:1 coat Everlife Rust Inhibiting Metal Primer, White 52161, Red 521501 or 2 coats Cal Pro 2000 Series Acrylic Flat 556XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Cal Pro 2000 Series Acrylic Flat 556XX▪ Acoustical Tile:2 coats Cal Pro 2000 Series Acrylic Flat 556XXCal Pro 2000 Series Acrylic Latex Flat FinishPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the pastel base: 55691**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CategoryA/a: 30 g/l Per EU Method Directive 2004/42/CE5/31/2012556XXProduct Specifications:Type: *Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.1 % ±2Solids by Weight: 50.5 % ±2Vehicle: 58.3 % ±2Pigment: 41.7 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:108KU ± 3Maximum VOC: **50 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepSuper Hide WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.6 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 325-375s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorCal Pro 2000 Series is a smooth flowing anti-spatter eggshell finish for use on walls, ceilings and woodwork in homes,apartments, condominiums and commercial applications. Cal Pro 2000 Series is easily applied, dries quickly, andprovides excellent hiding for most new and previously painted surfaces and can be applied by brush, roller or spray.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, primed metal, primed galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.CALPRO 2000 Series ACRYLIC EGGSHELL is self-priming over bare sheetrock, composition board, ceiling tile andconcrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal, Galvanized Metal - Clean, then prime with Everlife Rust Inhibiting Metal Primer.Wood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Cal Pro 2000 Series Acrylic Eggshell 557XX▪ Concrete, Non-Porous Masonry:2 coats Cal Pro 2000 Series Acrylic Eggshell 557XX▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Cal Pro 2000 Series Acrylic Eggshell 557XX▪ Ferrous Metal - Un-primed:1 coat Everlife Rust Inhibiting Metal Primer 52150 (Red), 52161 (White)1 or 2 coats Cal Pro 2000 Series Acrylic Eggshell 557XX▪ Galvanized Metal:1 coat Everlife Rust Inhibiting Metal Primer, White 52161, Red 521501 or 2 coats Cal Pro 2000 Series Acrylic Eggshell 557XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Cal Pro 2000 Series Acrylic Eggshell 557XX▪ Acoustical Tile:2 coats Cal Pro 2000 Series Acrylic Eggshell 557XXCal Pro 2000 Series Acrylic Latex Eggshell FinishPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the pastel base: 55791**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CategoryA/d: 130 g/l Per EU Method Directive 2004/42/CE5/31/2012557XXProduct Specifications:Type: *Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 7 @ 60° ± 2Volume Solids: 32.3 % ±2Solids by Weight: 48.4 % ±2Vehicle: 66.7 % ±2Pigment: 33.3 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F: 98KU ± 3Maximum VOC: **150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepSuper Hide WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.0 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorCal Pro 2000 Series is a smooth flowing anti-spatter semi-gloss finish for use on walls, ceilings and woodwork inhomes, apartments, condominiums and commercial applications. Cal Pro 2000 Series is easily applied, dries quickly,and provides excellent hiding for most new and previously painted surfaces and can be applied by brush, roller orspray.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, primed galvanized metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. CalPro 2000 Series ACRYLIC SEMI-GLOSS is self-priming over bare sheetrock, composition board, ceiling tile andconcrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal, Galvanized Metal - Clean, then prime with Everlife Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:2 coats Cal Pro 2000 Series Acrylic Semi-Gloss 558XX▪ Concrete, Non-Porous Masonry:2 coats Cal Pro 2000 Series Acrylic Semi-Gloss 558XX▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Cal Pro 2000 Series Acrylic Semi-Gloss 558XX▪ Ferrous Metal - Un-primed:1 coat Everlife Rust Inhibiting Metal Primer 521501 or 2 coats Cal Pro 2000 Series Acrylic Semi-Gloss 558XX▪ Galvanized Metal:1 coat Everlife Rust Inhibiting Metal Primer, White 52161, Red 521501 or 2 coats Cal Pro 2000 Series Acrylic Semi-Gloss 558XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Cal Pro 2000 Series Acrylic Semi-Gloss 558XX▪ Acoustical Tile:2 coats Cal Pro 2000 Series Acrylic Semi-Gloss 558XXCal Pro 2000 Series Acrylic Latex Semi-Gloss FinishPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specification data based on the pastel base: 55891**Information on EU VOC (Calculated differently from US Method): MAXIMUM VOC (As used) Based on EU CategoryA/d: 130 g/l Per EU Method Directive 2004/42/CE5/31/2012558XXProduct Specifications:Type: *Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 31.5 % ±2Solids by Weight: 43.1 % ±2Vehicle: 79.0 % ±2Pigment: 21.0 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F: 93KU ± 3Maximum VOC: **150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepSuper Hide WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 10.1 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGInteriorPacific Semi-Gloss is a smooth flowing latex semi-gloss enamel developed to provide an attractive, scrubbable finishfor high use areas in homes, schools, commercial and public buildings. This product is self-priming over mostsubstrates. This anti-splatter formulation dries quickly to a velvety smooth finish ideal for most interior surfaces.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, primed galvanized metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800- 424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Pacific Semi-Gloss is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted. It is preferable to prime new plaster with 100% Acrylic Primer such as Primer Choice 50300.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal PrimerNew Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-Blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Primer Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock: (It is preferable to prime new plaster with 100% Acrylic Primer such as Prime Choice50300)2 coats Pacific Semi-Gloss 559XX▪ Concrete, Non-Porous Masonry:2 coats Pacific Semi-Gloss 559XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Pacific Semi-Gloss 559XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® 106X-Series Rust Inhibiting Metal Primer1 or 2 coats Pacific Semi-Gloss 559XX▪ Galvanized Metal:1 coat Rust Stop® 106X-Series Rust Inhibiting Metal Primer1 or 2 coats Pacific Semi-Gloss 559XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Pacific Semi-Gloss 559XX▪ Acoustical Tile:2 coats Pacific Semi-Gloss 559XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Pacific® Semi-Gloss559XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 31.8 % ±2Solids by Weight: 43.5 % ±2Vehicle: 79.1 % ±2Pigment: 20.9 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F: 93KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelDeep7 StockMediumNeutralAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.1 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGInteriorPacific Flat is a smooth flowing flat finish formulated for most wall surfaces in homes, apartments, commercial andpublic buildings. This product is self-priming over most substrates. This versatile product provides high hiding, antispattercharacteristics for ease of application on new or previously painted surfaces.Recommended Use:Uses: Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, primed galvanized metal,acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Pacific Flat is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted. It is preferable to prime new plaster with 100% Acrylic Primer such as Primer Choice 50300.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal PrimerNew Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-Blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Primer Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock: (It is preferable to prime new plaster with 100% Acylic Primer such as Prime Choice50300)2 coats Pacific Flat 560XX▪ Concrete, Non-Porous Masonry:2 coats Pacific Flat 560XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Pacific Flat 560XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® 106X-Series Rust Inhibiting Metal Primer1 or 2 coats Pacific Flat 560XX▪ Galvanized Metal:1 coat Rust Stop® 106X-Series Rust Inhibiting Metal Primer1 or 2 coats Pacific Flat 560XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Pacific Flat 560XX▪ Acoustical Tile:2 coats Pacific Flat 560XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Pacific® Flat560XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.7 % ±2Solids by Weight: 51.5 % ±2Vehicle: 57.3 % ±2Pigment: 42.8 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:105KU ± 5Maximum VOC: 50 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelDeep7 StockMediumNeutralAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.8 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 280-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGInteriorPacific Eggshell is a smooth flowing low lustre eggshell enamel formulated to provide excellent washability anddurability to ceiling and wall surfaces.This product is self-priming over most substrates. It’s anti-splatter formulationmakes for easy application in homes, schools, commercial and institutional buildings.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, primed metal, primed galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800- 424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Pacific Eggshell is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted. It is preferable to prime new plaster with 100% Acrylic Primer such as Primer Choice 50300.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal PrimerNew Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-Blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Primer Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock: (It is preferable to prime new plaster with 100% Acrylic Primer such as Prime Choice50300)2 coats Pacific Eggshell 561XX▪ Concrete, Non-Porous Masonry:2 coats Pacific Eggshell 561XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Pacific Eggshell 561XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® 106X-Series Rust Inhibiting Metal Primer1 or 2 coats Pacific Eggshell 561XX▪ Galvanized Metal:1 coat Rust Stop® 106X-Series Rust Inhibiting Metal Primer1 or 2 coats Pacific Eggshell 561XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Pacific Eggshell 561XX▪ Acoustical Tile:2 coats Pacific Eggshell 561XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Pacific® Eggshell561XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 7 @ 60° ± 2Volume Solids: 31.1 % ±2Solids by Weight: 47.3 % ±2Vehicle: 67.0 % ±2Pigment: 33.0 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F: 99KU ± 1Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelDeep7 StockMediumNeutralAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.0 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis heavy bodied white 100% acrylic latex texture paint can be used to create a unique and distinctive sand plasterfinish. It will mask hair line cracks and imperfections and may be painted over with any latex to provide a colored sandfinish.Recommended Use:Plaster, sheetrock, wallboard, masonry, plywood.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. SandFinish is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Previously Painted Surfaces - Wash, sand or dust to obtain a paintable surface.Glossy Surfaces - Dull by sanding to insure proper adhesion of paint.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Non-Porous Masonry:1 coat Prime Choice All Surface Acrylic Primer 503001 coat Sand Finish 56500or2 coats Sand Finish 56500▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Sand Finish▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Sand FinishNote: If a distinctive or different texture is desired, a small test patch should be done to determine the desiredappearance.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Sand Finish 100% Acrylic Latex56500Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 47.4 % ±2Solids by Weight: 67.3 % ±2Vehicle: 42.3 % ±2Pigment: 57.7 % ±2Dry Film Thickness: 8 milsViscosity @ 77 °F: 80-90 KU ± 5Maximum VOC: 300 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 13.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 90-110s.f./gal.Porous: 70-90 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -White FiberRoller -Stipple, Long nap, Texturingtools<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorENVIROTECH ZERO VOC 100% Acrylic Latex Flat is a commercial grade, environmentally preferred interior paint withessentially no odor. The 100% acrylic latex formulation is smooth flowing with excellent application characteristics.High hiding and durable, ENVIROTECH Zero VOC dries to an attractive smooth finish that is washable and provides auniform appearance. It is the perfect finish for high use areas such as kitchens, baths, corridors, service areas,classrooms and general surfaces in public buildings and institutions.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.ENVIROTECH Zero VOC 100% Acrylic Latex Flat is self-priming over bare sheetrock, composition board, ceiling tileand concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of Mason Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat ENVIROTECH Zero VOC Interior 100% Acrylic Latex Primer-Sealer 64600 or2 coats ENVIROTECH Zero VOC 100% Acrylic Latex Flat 633XX▪ Concrete, Non-Porous Masonry:2 coats ENVIROTECH Zero VOC 100% Acrylic Latex Flat 633XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37512 coats ENVIROTECH Zero VOC 100% Acrylic Latex Flat 633XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats ENVIROTECH Zero VOC 100% Acrylic Latex Flat 633XX▪ Ferrous Metal -Primed, Galvanized Metal:2 coats ENVIROTECH Zero VOC 100% Acrylic Latex Flat 633XX▪ Wood:1 coat ENVIROTECH Zero VOC Interior 100% Acrylic Latex Primer-Sealer 646001 or 2 coats ENVIROTECH Zero VOC 100% Acrylic Latex Flat 633XX▪ Acoustical Tile:2 coats ENVIROTECH Zero VOC 100% Acrylic Latex Flat 633XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012ENVIROTECH Zero VOC 100% Acrylic Latex Flat633XX*Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.7 % ±2Solids by Weight: 49.1 % ±2Vehicle: 63.1 % ±2Pigment: 36.9 % ±2Dry Film Thickness: 1.6 milsViscosity @ 77 °F:105KU ± 5Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or Polyester* Specifications shown above are for 63391Roller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ENVIROTECH ZERO VOC Acrylic Latex Semi-Gloss is a commercial grade, ceramic fortified, and environmentallypreferred interior paint with essentially no odor. The acrylic latex formulation is smooth flowing with excellentapplication characteristics. High hiding and durable, ENVIROTECH Zero VOC dries to an attractive smooth finish thatis washable and provides a uniform appearance. Rooms and offices painted with ENVIROTECH Zero VOC paint canbe occupied right away without a compromise to healthy indoor air quality. It is the perfect finish for high use areassuch as kitchens, baths, corridors, service areas, classrooms and general surfaces in public buildings and institutions.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.ENVIROTECH ZERO VOC Acrylic Latex Semigloss is self-priming over bare sheetrock, composition board, ceiling tileand concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with EVERLIFE Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a smoother surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat ENVIROTECH Zero VOC Interior Acrylic Latex Primer-Sealer 64600 or2 coats ENVIROTECH ZERO VOC Acrylic Latex Semigloss 663XX▪ Concrete, Non-Porous Masonry:2 coats ENVIROTECH ZERO VOC Acrylic Latex Semigloss 663XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats ENVIROTECH ZERO VOC Acrylic Latex Semigloss 663XX▪ Ferrous Metal - Unprimed:1 coat EVERLIFE Rust Inhibiting Metal Primer 211501 or 2 coats ENVIROTECH ZERO VOC Acrylic Latex Semigloss 663XX▪ Ferrous Metal - Primed, Galvanized Metal:2 coats ENVIROTECH ZERO VOC Acrylic Latex Semigloss 663XX▪ Wood:1 coat ENVIROTECH Zero VOC Interior Acrylic Latex Primer-Sealer 64600 or1 or 2 coats ENVIROTECH ZERO VOC Acrylic Latex Semigloss 663XX▪ Acoustical Tile:2 coats ENVIROTECH ZERO VOC Acrylic Latex Semigloss 663XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.* Specifications shown above are for 66391Paint & Primer in OneInterior** Note: No claim is made for the preservative action to other than the paint film.5/31/2012ENVIROTECH Zero VOC Acrylic Latex SemiGloss(With antimicrobial properties**) 663XX*Product Specifications:Type:Acrylic LatexExposure:InteriorSpecular Gloss: 37@ 60° ± 5Volume Solids: 36.4 % ±2Solids by Weight: 49.4 % ±2Vehicle: 73.9 % ±2Pigment: 26.1 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 24 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: N/A s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:flawless ELEMENTS Zero VOC Interior Eggshell is an environmentally preferred, premium quality interior paint thatprovides flawless application and exceptional durability with essentially no odor during and after painting. This productis self-priming over many new and previously painted surfaces. Specific primers are recommended for many new woodsurfaces. Rooms and offices painted with flawless ELEMENTS Zero VOC can be occupied right away without acompromise to healthy indoor air quality. With Microban® antimicrobial protection, flawless ELEMENTS provides anadded level of mildew resistance not found in other Zero VOC paints. For more information visit www.microban.com.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surface Preparation: Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size,calcimine, wax, soap, and other surface contamination. Patch irregularities with vinyl patching paste or an appropriatepatching compound. flawless ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban is selfprimingover bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneautralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 74600 or2 coats flawless ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban 731XX▪ Concrete, Non-Porous Masonry:2 coats flawless ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban 731XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats flawless ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban 731XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211501 or 2 coats flawless ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban 731XX▪ Ferrous Metal -Primed, Galvanized Metal:2 coats flawless ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban 731XX▪ Wood:1 coat flawlessELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 746001 or 2 coats ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban 731XX▪ Acoustical Tile:2 coats flawless ELEMENTS Zero VOC Interior Eggshell 100% Acrylic Latex Enamel with Microban 731XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.* Specifications shown above are for 73191SELF-PRIMINGInterior5/31/2012flawless ELEMENTS Zero VOC Eggshell100% Acrylic Latex Enamel with Microban® 731XX*Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 8 @ 60° ± 2Volume Solids: 42.4 % ±2Solids by Weight: 59.4 % ±2Vehicle: 59.6 % ±2Pigment: 40.4 % ±2Dry Film Thickness: 2 milsViscosity @ 77 °F:105KU ± 5Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.9 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 24 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 325-375s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:flawless ELEMENTS Zero VOC Interior Flat is an environmentally preferred, premium quality interior paint thatprovides flawless application and exceptional durability with essentially no odor during and after painting. This productis self-priming over many new and previously painted surfaces. Specific primers are recommended for many new woodsurfaces. Rooms and offices painted with flawless ELEMENTS Zero VOC can be occupied right away without acompromise to healthy indoor air quality. With Microban® antimicrobial protection, flawless ELEMENTS provides anadded level of mildew resistance not found in other Zero VOC paints. For more information visit www.microban.com.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban is self-priming over baresheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New Plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal PrimerNew Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should be primed with <strong>California</strong>Prime Choice Alkyd Primer0sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of ProPaint Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 74600 or2 coats flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban 733XX▪ Concrete, Non-Porous Masonry:2 coats flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban 733XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37512 coats flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban 733XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211501 or 2 coats flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban 733XX▪ Ferrous Metal -Primed, Galvanized Metal:2 coats flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban 733XX▪ Wood:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 746001 or 2 coats flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban 733XX▪ Acoustical Tile:2 coats flawless ELEMENTS Zero VOC Interior Flat 100% Acrylic Latex Enamel with Microban 733XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.* Specifications shown above are for 73391SELF-PRIMINGInterior5/31/2012flawless ELEMENTS Zero VOC Flat100% Acrylic Latex Enamel with Microban® 733XX*Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 41.8 % ±2Solids by Weight: 59.7 % ±2Vehicle: 54.9 % ±2Pigment: 45.1 % ±2Dry Film Thickness: 1.6 milsViscosity @ 77 °F:105KU ± 5Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 12.0 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 350-400 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interiorflawless ELEMENTS Zero VOC Interior Pearl is an environmentally preferred, premium quality interior satin-likepaint that provides flawless application and exceptional durability with essentially no odor during and after painting.Rooms and offices painted with flawless ELEMENTS Zero VOC can be occupied right away without a compromise tohealthy indoor air quality. With Microban® antimicrobial protection, flawless ELEMENTS provides an added level ofmildew resistance not found in other Zero VOC paints. For more information visit www.microban.com.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surface Preparation: Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size,calcimine, wax, soap, and other surface contamination. Patch irregularities with vinyl patching paste or an appropriatepatching compound. flawless ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban is selfprimingover bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid Rust Inhibiting Metal Primer.Wood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer or StopZ.Masonry Block - Apply one coat of Mason-Cote Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 74600 or2 coats flawless ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban 736XX▪ Concrete, Non-Porous Masonry:2 coats flawless ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban 736XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats flawless ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban 736XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats flawless ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban 736XX▪ Ferrous Metal -Primed, Galvanized Metal:2 coats flawless ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban 736XX▪ Wood:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 746001 or 2 coats ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban 736XX▪ Acoustical Tile:2 coats flawless ELEMENTS Zero VOC Interior Pearl 100% Acrylic Latex Enamel with Microban 736XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.flawless ELEMENTS Zero VOC PearlLatex Enamel with Microban®5/31/2012736XX*Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 27@ 60° ± 2Volume Solids: 39.3 % ±2Solids by Weight: 53.5 % ±2Vehicle: 70.9 % ±2Pigment: 29.1 % ±2Dry Film Thickness: 2 milsViscosity @ 77 °F:102KU ± 3Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.9 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 24 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 325-375s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or Polyester* Specifications shown above are for 73691 (Pastel Base)Roller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:flawless ELEMENTS Zero VOC Interior Semi-Gloss is an environmentally preferred, premium quality interior paintthat provides flawless application and exceptional durability with essentially no odor during and after painting. Thisproduct is self-priming over many new and previously painted surfaces. Specific primers are recommended for manynew wood surfaces. Rooms and offices painted with flawless ELEMENTS Zero VOC can be occupied right awaywithout a compromise to healthy indoor air quality. With Microban® antimicrobial protection, flawless ELEMENTSprovides an added level of mildew resistance not found in other Zero VOC paints. For more information visitwww.microban.com.Recommended Use:Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, galvanized metal, acoustical surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wetmop or HEPA vacuum. Before you start, find out how to protect yourself and your family by contacting the U.S.EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic latex enamel with Microban is self-priming over baresheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed before painting. Do not sand until after thesurface is painted.Ferrous Metal - Clean, then prime with Rust Stop® Rust Inhibiting Metal PrimerNew Wood - Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 74600 or2 coats flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic Latex Enamel with Microban 763XX▪ Concrete, Non-Porous Masonry:2 coats flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic Latex Enamel with Microban 763XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic Latex Enamel with Microban 763XX▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer1 or 2 coats flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic Latex Enamel with Microban 763XX▪ Ferrous Metal -Primed, Galvanized Metal:2 coats flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic Latex Enamel with Microban 763XX▪ Wood:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 746001 or 2 coats flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic Latex Enamel with Microban 763XX▪ Acoustical Tile:2 coats flawless ELEMENTS Zero VOC Interior Semi-gloss 100% Acrylic Latex Enamel with Microban 763XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.* Specifications shown above are for 76391SELF-PRIMINGInterior5/31/2012flawless ELEMENTS Zero VOC Semi-Gloss100% Acrylic Latex Enamel with Microban® 763XX*Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 37@ 60° ± 5Volume Solids: 39.5 % ±2Solids by Weight: 53.0 % ±2Vehicle: 71.9 % ±2Pigment: 28.1 % ±2Dry Film Thickness: 2 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.8 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 24 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorThis is the finest quality, all-purpose alkyd semi-gloss enamel available. This hard, durable finish flows on easily andlevels to a beautiful smooth lustrous finish. Used as is or tinted according to directions, this hard, durable nonindustrialfinish will help prevent rusting of ferrous metal substrates. Alkyd paints oxidize with age so light colors willeventually show yellowing, expecially in poorly lighted areas.Recommended Use:Metal Doors ▪ Handrails ▪ Household Tools ▪ Garden Equipment ▪ Steel ShelvingApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/leadSurfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination.Stir thoroughly before using to insure proper dispersion. This product is of proper consistency as packaged to beapplied without thinning under normal environmental and application conditions.This product can be tinted with Universal Colorants but the amount of colorant should not exceed the amountrecommended for the tint base used.Apply by brush or roller using long strokes. Two coats are generally required for deep and ultra deep colors or whenpainting over a contrasting color. Apply paint on a small area, allow it to dry and approve for accuracy beforecompleting the job.Previously painted surfaces in good condition do not require a primer. One coat of Fres~Coat Alkyd Enamel is usuallysufficient while two coats will provide more durability. On new or previously painted metal surfaces where rusting is aproblem, remove all traces of rust by sandpaper, scraper or mechanical means and prime with a rust-inhibitive primersuch as Larcoloid® Inhibiting Metal Primer and finish with 1 or 2 coats of Fres~Coat Alkyd Enamel.Fres~Coat Alkyd Semi-GlossRust Preventative for Metal Substrates5/31/2012210XXProduct Specifications:Type:AlkydExposure: Interior or ExteriorSpecular Gloss: 60@ 60° ± 5Volume Solids: 56.5 % ±2Solids by Weight: 74.9 % ±2Vehicle: 57.7 % ±2Pigment: 42.8 % ±2Dry Film Thickness: 2.0 milsViscosity @ 77 °F: 80KU ± 5Maximum VOC: 400 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsAvailable Colors and Bases:WhiteMediumUltra DeepPastelDeepNeutralAvailable Package Sizes:QuartGallonFerrous Metal - Clean, then prime with Larcoloid Rust Inhibiting Metal Primer.Glossy Surfaces - Dull surface by sanding to insure adhesion of paint.Architectural Specifications:▪ Ferrous Metal - Un-primed:1 coat Larcoloid Rust Inhibiting Metal Primer 211501 or 2 coats Fres~Coat Alkyd Semi-Gloss 210XX*▪ Galvanized Metal:1 coat Larcoloid Acrylic Latex Rust Inhibiting Metal Primer White 51106, Gray 51108 and Red 511071 or 2 coats Fres~Coat Alkyd Semi-Gloss 210XX*Precautions:Do not add water, oils or mix with other paints. Do not apply when air or surface temperature is below 50°F or whendrying conditions are poor. Do not use on unprimed galvanized surfaces.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not takeinternally. Close container after each use.*Note: Maximum hardness is achieved in 3-4 weeks.(Weight Per Gallon: 11.1 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 16 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-500 s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorNexTech Water Reducible Alkyd Satin Finish EnamelNexTech Waterborne Satin Finish Enamel is an alkyd dispersion – the next step in waterborne technology. NexTech isa premium enamel that incorporates all of the positive attributes of alkyd/oil based paints with the benefit of soap andwater cleanup, extremely low VOC’s and almost NO odor. NexTech applies easily, dries quickly and levels whenbrushed, like a sprayed-on finish. It’s a hard, durable coating which virtually eliminates blocking (the tendency of driedpainted to stick to itself or for books and other objects to stick to a painted surface). NexTech can be used on interiorand exterior surfaces.Recommended Use:For properly prepared interior and exterior surfaces such as wood, drywall, primed masonry, primed plaster and primedmetal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.SURFACE PREPARATION: Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, gluesize, calcimine, wax, soap, and other surface contamination. Patch irregularities with vinyl patching paste or anappropriate patching compound. NexTech Alkyd Dispersion is self-priming over previously painted surfaces in soundscondition as well as bare sheetrock, composition board, ceiling tile and concrete. Additional details productsspecifications for various surfaces and Material Safety Data Sheet are available online at www.californiapaints.comAPPLICATION: This product is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Product can be applied by airless spray with a 0.017 to 0.019 tip. Air and surface temperatures should be50°F (10°C) or higher during application and drying time. To prevent the addition of VOC’s, this product should betinted with <strong>California</strong> Trillion® Super Strength Colorant. Check color for accuracy before application.CLEAN UP: Clean brushes and rollers with warn soapy water. A final rinse of mineral spirits is recommended toremove residual alkyd.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:Plaster/ Wallboard/Sheetrock: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Satin Finish.Concrete/Non Porous Masonry: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Satin Finish.Porous Masonry and Block: 1 coat Mason Cote® Block Filler. 1 or 2 coats NexTech Satin Finish.Ferrous Metal- Unprimed: 1 or 2 coats Everlife® Alkyd or 100% Acrylic Metal Primer.1 or 2 coats NexTech Satin Finish.Galvanized Metal: 1 or 2 coats Everlife 100% Acrylic Metal Primer.1 or 2 coats NexTech Satin Finish.Wood: 1 or 2 coats of <strong>California</strong> Oil Base or Acrylic primer (interior or exterior).1 or 2 coats NexTech Satin Finish.Precautions:NexTech will tend to yellow slightly in the absence of natural or artificial light (much less than typical alkyds). Do notuse tint bases unstinted. Temperature of air and surface should be at least 50°F during application and curing time.Inadequate ventilation or high humidity will lengthen drying time. All colors should be applied on a small area, allowedto dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.CAUTION: Use only with adequate ventilation. Do not breathe spray mist or sanding dust. Ensure fresh air entry duringapplication and drying. Avoid contact with eyes and prolonged or repeated contact with skin. Avoid exposure to dustand spray mist by wearing a NIOSH approved respirator during application, sanding and clean up. Follow respiratormanufacturer’s directions for respirator use. Close container after each use. Wash thoroughly after handling.FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15 minutes; for skin, washthoroughly with soap and water. If symptoms persist, seek medical attention. If you experience difficulty breathing,leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.5/31/2012219XXProduct Specifications:Type: Waterborne AlkydExposure: Interior or ExteriorSpecular Gloss:40° @ 60° ± 2Volume Solids: 42.5 % ±2Solids by Weight: 57.8 % ±2Vehicle: 67 % ±2Pigment: 33 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F:100KU ± 5Maximum VOC:
Product Description:Interior or ExteriorNexTech Water Reducible Alkyd Semi-Gloss EnamelNexTech Waterborne Semi-Gloss Enamel is an alkyd dispersion – the next step in waterborne technology. NexTech isa premium enamel that incorporates all of the positive attributes of alkyd/oil based paints with the benefit of soap andwater cleanup, extremely low VOC’s and almost NO odor. NexTech applies easily, dries quickly and levels whenbrushed, like a sprayed-on finish. It’s a hard, durable coating which virtually eliminates blocking (the tendency of driedpainted to stick to itself or for books and other objects to stick to a painted surface). NexTech can be used on interiorand exterior surfaces.Recommended Use:For properly prepared interior and exterior surfaces such as wood, drywall, primed masonry, primed plaster and primedmetal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.SURFACE PREPARATION: Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, gluesize, calcimine, wax, soap, and other surface contamination. Patch irregularities with vinyl patching paste or anappropriate patching compound. NexTech Alkyd Dispersion is self-priming over previously painted surfaces in soundscondition as well as bare sheetrock, composition board, ceiling tile and concrete. Additional details productsspecifications for various surfaces and Material Safety Data Sheet are available online at www.californiapaints.comAPPLICATION: This product is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Product can be applied by airless spray with a 0.017 to 0.019 tip. Air and surface temperatures should be50°F (10°C) or higher during application and drying time. To prevent the addition of VOC’s, this product should betinted with <strong>California</strong> Trillion® Super Strength Colorant. Check color for accuracy before application.CLEAN UP: Clean brushes and rollers with warn soapy water. A final rinse of mineral spirits is recommended toremove residual alkyd.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:Plaster/ Wallboard/Sheetrock: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Semi-Gloss Finish.Concrete/Non Porous Masonry: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Semi-Gloss Finish.Porous Masonry and Block: 1 coat Mason Cote® Block Filler. 1 or 2 coats NexTech Semi-Gloss Finish.Ferrous Metal- Unprimed: 1 or 2 coats Everlife® Alkyd or 100% Acrylic Metal Primer. 1 or 2 coats NexTech Semi-Gloss Finish.Galvanized Metal: 1 or 2 coats Everlife 100% Acrylic Metal Primer. 1 or 2 coats NexTech Semi-Gloss Finish.Wood: 1 or 2 coats of <strong>California</strong> Oil Base or Acrylic primer (interior or exterior). 1 or 2 coats NexTech Semi-GlossFinish.Precautions:NexTech will tend to yellow slightly in the absence of natural or artificial light (much less than typical alkyds). Do notuse tint bases unstinted. Temperature of air and surface should be at least 50°F during application and curing time.Inadequate ventilation or high humidity will lengthen drying time. All colors should be applied on a small area, allowedto dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.CAUTION: Use only with adequate ventilation. Do not breathe spray mist or sanding dust. Ensure fresh air entry duringapplication and drying. Avoid contact with eyes and prolonged or repeated contact with skin. Avoid exposure to dustand spray mist by wearing a NIOSH approved respirator during application, sanding and clean up. Follow respiratormanufacturer’s directions for respirator use. Close container after each use. Wash thoroughly after handling.FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15 minutes; for skin, washthoroughly with soap and water. If symptoms persist, seek medical attention. If you experience difficulty breathing,leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.5/31/2012220XXProduct Specifications:Type: Waterborne AlkydExposure: Interior or ExteriorSpecular Gloss: 60@ 60° ± 2Volume Solids: 42 % ±2Solids by Weight: 56.1 % ±2Vehicle: 71.1 % ±2Pigment: 28.8 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F: 93KU ± 5Maximum VOC:
Product Description:InteriorProPaint Alkyd Semi-Gloss White is an economical yet durable enamel designed for interior use on trim, walls,cabinets and furniture. It is specially formulated to provide a tough, scrubbable finish and is ideal for such areas askitchens, baths, hallways, playrooms and other high service areas.Recommended Use:Sheetrock, plaster, wallboard, concrete block, primed wood, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.5/31/2012ProPaint® Alkyd Semi-Gloss White23500Product Specifications:Type:AlkydExposure:InteriorSpecular Gloss: 57@ 60° ± 5Volume Solids: 51.2 % ±2Solids by Weight: 69.0 % ±2Vehicle: 64.3 % ±2Pigment: 35.7 % ±2Dry Film Thickness: 2 milsViscosity @ 77 °F: 87KU ± 5Maximum VOC: 380 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsPlaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any “hot spots”. The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before priming. Do not sand until after thesurface is primed. Prime with Prime Touch Professional Acrylic Latex Primer/Sealer.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Wood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer Then prime with Prime Touch Professional Acrylic Latex Primer/Sealer.Ferrous Metal - Clean, then prime with Larcoloid® Rust Inhibiting Metal Primer.Glossy Surfaces - Dull surface by sanding to insure adhesion of paint.Masonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Previously Painted Surfaces - Wash, sand, or dust to obtain proper adhesion of paint.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats ProPrime Alkyd Semi-Gloss White 23500▪ Concrete, Non-Porous Masonry:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats ProPrime Alkyd Semi-Gloss White 23500▪ Porous Masonry and Block:1 coat ProPaint Block Filler 515001 or 2 coats ProPrime Alkyd Semi-Gloss White 23500▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats ProPrime Alkyd Semi-Gloss White 23500▪ Wood:1 coat Prime Touch Professional Acrylic Latex Primer/Sealer 545001 or 2 coats ProPrime Alkyd Semi-Gloss White 23500Precautions:Do not apply when air or surface temperature is below 50° F or when moisture is evident. Do not mix with latex paint.Inadequate ventilation will retard drying time. Two thin coats provides a better finish than one thick coat.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not takeinternally. Close container after each use.Available Colors and Bases:WhiteAvailable Package Sizes:Gallon(Weight Per Gallon: 10.1 lbs. ± .5 lb)Drying Times:To Touch: 4 hrs.To Handle: 6 hrs.To Recoat: 16 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Natural BristleRoller -Short Nap Synthetic orNatural FiberAirless Spray -.011 to .013 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis is the most economical of primers designed as a first coat on bare surfaces to be topcoated with Preference Flat.Recommended Use:Wallboard, Sheetrock, Concrete, Masonry BlockApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Wallboard, Sheetrock, Concrete, Masonry, Wood, Acoustical Tile:1 coat Preference Primer 500001 or 2 coats Preference Flat or Contractor FlatPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not use in areas subject to continuousdampness. Do not apply when air or surface temperature is below 50° F or when drying conditions are poor. Keep fromfreezing. Do not use this product under oil base products, first line latex products or products with any degree of gloss.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Preference Primer50000Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.4 % ±2Solids by Weight: 52.1 % ±2Vehicle: 53.9 % ±2Pigment: 46.2 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F:100KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon 5 Gallon(Weight Per Gallon: 12.0 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 3 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 225-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic Nylon or PolyesterRoller -3/8 Nap Synthetic FiberAirless Spray -Airless .017-.019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorPrime Choice All Surface Acrylic Primer is a quick drying high hiding enamel undercoater. It provides maximumsealing to porous surfaces and exceptional adhesion to hard and glossy surfaces. This primer has superior holdout,will not raise wood grain and has anti-spatter properties. It is tintable with up to 2oz. of Universal Colorant.Recommended Use:Prime Choice All Surface Acrylic Primer can be used on Gysum board, plaster, masonry, wood, concrete, paneling,aluminum, galvanized metal, plastic laminates, ceramic tile, glass, commercial vinyl wallcoverings, as well aspreviously painted surfaces, gloss enamels and varnishes.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil,glue size, calcimine, wax, soap, and other surface contamination. Patch irregularities with vinyl patching paste or anappropriate patching compound.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. New plasterand masonry surfaces must be fully cured before priming. Sanding is not required for properly and thoroughly cleanedhard or glossy surfaces, but abrasion of the surface will increase adhesion of this product. Wash new plaster withclean water, rinsing rags or sponges frequently. Do not sand plaster until after the surface is primed. Taped joints onsheetrock should be sanded smooth, with care being exercised not to abrade the surrounding paper backing.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Wood - Seal knots and stains with Prime Choice Universal Primer 52500.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Concrete, Non-Porous Masonry:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series FinishPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Low temperature, high humidity, or inadequateventilation will slow drying times. Application on hard non-porous surfaces requires a minimum of 2 hours dry timebefore recoating. Stearate containing clear finishes, shellacs and any clear finish that has been waxed, polished orhas surface soap residue can present adhesion problems for any coating. Apply a test area of primer over any clearfinish and test for adequate adhesion after one week of curing. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.This product contains more than 0.1% crystalline silica (CAS No. 14808-60-07) which has been classified by IARC asa Class 1 carcinogen. Normal application procedures pose no hazard since the silica is wet and encapsulated, butgrinding or sanding dried films may yield respirable silica dusts. Control exposures to less than 0.1 mg/m³ usingNIOSH approved dust filter respirators.6/1/2012Prime Choice All Surface Acrylic Primer50300Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 33.1 % ±2Solids by Weight: 49.0 % ±2Vehicle: 68.3 % ±2Pigment: 31.7 % ±2Dry Film Thickness: 2.4 milsViscosity @ 77 °F:100KU ± 5Maximum VOC: 200 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.0 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 450-500s.f./gal.Porous: 200-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorGrip Coat Bonding Primer is a water-based urethane modified acrylic primer-sealer with excellent adhesion to a widevariety of surfaces that usually present difficult adhesion problems. Although it is recommended that a test-patch beapplied before proceeding, since there is such a wide variety of surfaces, PVC, other plastics*, glass, fiberglass,glossy paints, galvanized metal, tile or glazed block surfaces can usually be successfully primed with this product.This product is suitable for interior or exterior exposures. It must be topcoated with latex, alkyd, urethane orwaterborne epoxy topcoats.Recommended Use:Plaster, Sheetrock, Wallboard, Concrete, Masonry block, Wood, previously finished surfaces. Also PVC, otherplastics*, glass, fiberglass, glossy paints, galvanized metal or glazed block.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.All surfaces should be dry, clean and free of dirt, dust and other contaminants which would interfere with the adhesionor appearance of this primer.Clean the surface by power washing or washing with strong detergent followed by clean water rinse. Remove heavygrease or oil contaminants with solvent such as xylol or lacquer thinner. Reduce gloss by sanding and removesanding dust. Mildew and mold spores should be removed using bleach solution followed by a clean water rinse.5/31/2012GRIP COAT Bonding Primer50500Product Specifications:Type: Ureth. Modified AcrylicExposure: Interior or ExteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 37.4 % ±2Solids by Weight: 52.0 % ±2Vehicle: 68.2 % ±2Pigment: 31.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 86KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteGrip Coat Bonding Primer is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Grip Coat Bonding Primer can be applied with a nylon or polyester brush, 3/8" nap roller or airless sprayusing a .017 to .019 tip. Air and surface temperatures should be 50ºF (10ºC) or higher during application and dryingtime.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Concrete, Non-Porous Masonry:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Wood:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane Finish▪ PVC, other plastics*, glass, fiberglass, glossy paints, galvanized metal, tile or glazed block:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane FinishPrecautions:Do not paint on hot surfaces or in direct sun. Do not apply sooner than 4 hours before heavy dew or rain are expectedand be sure there will be at least 24 hours free of rain or high humidity after product application. Ideally, this productshould not be used in bathrooms, pool areas, below grade applications or where continuous water contact occurs.Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Not recommended for use over polypropylene or polyethylene.Available Package Sizes:QuartGallon(Weight Per Gallon: 10.9 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 6 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 200-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Interior or ExteriorProduct Description:Prime Choice Universal Primer No. 50600 is a quick drying, high performance 100% acrylic latex stain blocking primerthat provides exceptional adhesion and stain blocking properties. This environmentally friendly product may be usedinterior or exterior to block most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossysurfaces.Recommended Use:For properly prepared wallboard, plaster, sheetrock, masonry, wood, concrete, galvanized metal, plastic laminates, vinylwall coverings, under wallcoverings as well as previously painted surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be primed must be clean, dry, and free of grease, oil, wax, rust, loose paint, mildew or any surfacecontaminants. Wash glue size off plaster or other surfaces from which wallpaper has been removed.Do not apply over calcimine or other water soluble paints. Fill nicks, holes and voids with appropriate patching material,sand smooth and remove dust. New plaster and masonry surfaces must be fully cured before priming. Wash newplaster with clean water, rinsing rags or sponges frequently. Sanding is not required for properly and thoroughly cleanedhard or glossy surfaces, but abrasion of the surface will increase adhesion of this product. Do not sand plaster until afterthe surface is primed. Tape joints on sheetrock should be sanded smooth, with care being excercised not to abrade thesurrounding paper backing. Wire brush rusted areas to remove loose rust. Plasticizers must be thoroughly removedfrom vinyl wallcoverings with mineral spirits and a clean cloth that is changed frequently.Prime Choice Universal Primer hides well to seal many common stains such as crayon, graffiti, greasy spots, waterstains, rust, smoke stains, cedar and redwood bleed. Before priming stained areas, remove as much of the stain aspossible by washing, sanding or scraping. Some stains may require two coats. If an active stain discolors this primer,apply the finish coat to a small area to see if the stain is "locked" into the primer. If not, re-prime.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Masonry, Galvanized Metal Wood, Aluminum:1 coat Prime Choice Universal Primer 506001 or 2 coats any <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Low temperature, high humidity, or inadequateventilation will slow drying times. Application on hard non-porous surfaces requires a minimum of 2 hours dry timebefore recoating. Stearate containing clear finishes, shellacs and any clear finish that has been waxed, polished or hassurface soap residue can present adhesion problems for any coating. Apply a test area of primer over any clear finishand test for adequate adhesion after one week of curing.Prime Choice Universal Primer is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Product can be applied with a nylon or polyester brush, 3/8" nap synthetic roller or airless spray using .017to .019 tip. Air and surface temperature should be 50ºF (10ºC) or higher during application and drying time.Keep from freezing. Difficult stains may require the use of Prime Choice 20700 Low Odor Oil Base Primer Sealer.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 95/9/2011Prime Choice Universal Primer50600Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 15 @ 60° ± 5Volume Solids: 30.0%±2Solids by Weight: 43.8 % ±2Vehicle: 75.5 % ±2Pigment: 24.5 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.4 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 175-225 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Interior or ExteriorProduct Description:Prime Choice Universal Primer No. 50695 is a high performance 100% acrylic latex stain blocking neutral base primerthat provides exceptional adhesion and stain blocking properties. This environmentally friendly product may be usedinterior or exterior to block most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossysurfaces. When this neutral base is tinted with up to 12 liq. oz./gal. of universal colorant the dry-time is extended.*Recommended Use:For properly prepared wallboard, plaster, sheetrock, masonry, wood, concrete, galvanized metal, plastic laminates, vinylwall coverings, under wallcoverings as well as previously painted surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be primed must be clean, dry, and free of grease, oil, wax, rust, loose paint, mildew or any surfacecontaminants. Wash glue size off plaster or other surfaces from which wallpaper has been removed.Wash glue size off plaster or other surfaces from which wallpaper has been removed. Do not apply over calcimine orother water soluble paints. Fill nicks, holes and voids with appropriate patching material, sand smooth and removedust. New plaster and masonry surfaces must be fully cured before priming. Wash new plaster with clean water, rinsingrags or sponges frequently. Sanding is not required for properly and thoroughly cleaned hard or glossy surfaces, butabrasion of the surface will increase adhesion of this product. Do not sand plaster until after the surface is primed.Tape joints on sheetrock should be sanded smooth, with care being excercised not to abrade the surrounding paperbacking. Wire brush rusted areas to remove loose rust. Plasticizers must be thoroughly removed from vinylwallcoverings with mineral spirits and a clean cloth that is changed frequently.DATA/SPECIFICATIONS 96/7/2011Prime Choice Universal Primer Neutral Base50695*Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 15 @ 60° ± 5Volume Solids: 27.8%±2Solids by Weight: 37.2 % ±2Vehicle: 83.9 % ±2Pigment: 16.1 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:NeutralAvailable Package Sizes:Prime Choice Universal Primer hides well to seal many common stains such as crayon, graffiti, greasy spots, waterstains, rust, smoke stains, cedar and redwood bleed. Before priming stained areas, remove as much of the stain aspossible by washing, sanding or scraping. Some stains may require two coats. If an active stain discolors this primer,apply the finish coat to a small area to see if the stain is "locked" into the primer. If not, re-prime.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Masonry, Galvanized Metal Wood, Aluminum:1 coat Prime Choice Universal Primer 50695 tinted to color of choice*1 or 2 coats any <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Low temperature, high humidity, or inadequateventilation will slow drying times. Application on hard non-porous surfaces requires a minimum of 2 hours dry timebefore recoating. Stearate containing clear finishes, shellacs and any clear finish that has been waxed, polished or hassurface soap residue can present adhesion problems for any coating. Apply a test area of primer over any clear finishand test for adequate adhesion after one week of curing.Prime Choice Universal Primer is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Product can be applied with a nylon or polyester brush, 3/8" nap synthetic roller or airless spray using .017to .019 tip. Air and surface temperature should be 50ºF (10ºC) or higher during application and drying time.Keep from freezing. Difficult stains may require the use of Prime Choice 20700 Low Odor Oil Base Primer Sealer.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Note: Maximum universal colorant that should be added per gallon is 12 liquid ounces. Gallon container is short-filledto 116 liq. oz. and quart container is short-filled to 29 liq. oz.QuartGallon(Weight Per Gallon: 9.6 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 6 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 200-250 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis alkali resistant block filler is formulated to fill pores and small voids in masonry and light aggregate block. Thisready-mixed interior vinyl acrylic block filler eliminates pin holing and produces a uniform surface texture ready forfinish coating.Recommended Use:Concrete Block, Porous Masonry and ConcreteApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Masonry block should be “bricked down” so that all concrete nibs and projections are removed from the surface. Loosemortar, dirt, dust, grease and oil must also be removed before applying ProPaint Block Filler 51500. Large concretevoids or cracks should be patched with an appropriate oilfree patching material before painting. ProPaint Block Filler issupplied ready-to-use but can be thinned sparingly with water if necessary. It can be applied by brush, roller or spray.Brush - Use a synthetic nylon or polyester brush and apply material generously to the surface. Work the Filler into themasonry until all voids and hairline cracks are filled. Material should be finished brushed in one direction to create aneven appearance.Roller - Use a synthetic or lambs wool 3/8” - 3/4” nap roller cover. Work material into block and finish roll horizontally.Spray - ProPaint Block Filler is silica free and can be successfully sprayed without doing physical damage to sprayequipment. Heavy duty airless units using a .021 to .028 tip are ideal for large scale block filler applications.Architectural Specifications:▪ Porous Masonry, Block, Concrete:1 coat ProPaint Block Filler 515001 or 2 coats <strong>California</strong>® Latex, Alkyd or Oil-modified Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50 °F or when drying conditions are poor. Keep from freezing. Do not use under catalyzed epoxies, epoxypolyesters or aliphatic urethanes.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.6/1/2012ProPaint® Block Filler51500Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 46.7 % ±2Solids by Weight: 66.3 % ±2Vehicle: 44.0 % ±2Pigment: 56.0 % ±2Dry Film Thickness: 5 milsViscosity @ 77 °F:109KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:5 Gallon(Weight Per Gallon: 13.2 lbs. ± .5 lb)Drying Times:To Touch: 4 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth:N/As.f./gal.Porous: 100-150 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" -3/4" Nap Synthetic FiberAirless Spray -.021 to .028<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis white 100% acrylic latex will properly prepare most interior surfaces for wallpaper, foil, flock, canvas backed vinyl,and canvas wall coverings. This one step product bonds to most surfaces eliminating the need for sanding, primingand sizing. The white pigmentation helps hide seams and improve the appearance of thin or slightly transparent wallcoverings. It can also be tinted toward the background color of the wall covering with up to 2 oz. of Universal Colorant.Recommended Use:Gypsum Board, Wallboard, Plaster, Plastic Laminates, Painted Surfaces, Ceramic TileApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. Allsurfaces must be structurally sound before application of this surface primer.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Previously Painted Surfaces - Wash, sand or dust to obtain a paintable surface.Glossy Surfaces - Sanding is not required on properly and thoroughly cleaned hard or glossy surfaces, but abrasion ofthe surface will increase the adhesion of this product.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Wood, Previously Painted Surfaces, Laminates, Tile :1 coat Prep ’n Size II 52401▪ Concrete, Non-Porous Masonry:1 or 2 coats Prep ’n Size II 52401▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 coat Prep ’n Size II 52401Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not use in areas subject to continuousdampness. Do not apply when air or surface temperature is below 50 °F or when drying conditions are poor. Keep fromfreezing. Due to varied job conditions one full strip of wall covering should be hung and checked thoroughly before wallcovering is applied to the entire surface. Do not thin, it can reduce the efficiency of this product. Drying and curingtimes will be longer when Prep’n Size II is tinted.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.6/1/2012Prep ’n Size® II52401Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 25.1 % ±2Solids by Weight: 33.8 % ±2Vehicle: 87.7 % ±2Pigment: 12.3 % ±2Dry Film Thickness: .9 milsViscosity @ 77 °F: 88KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon(Weight Per Gallon: 9.5 lbs. ± .5 lb)Drying Times:To Touch: .3 hrs.To Handle: 4 hrs.To Recoat:hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 450 s.f./gal.Porous:s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorWipe-Out 100% Acrylic Latex Stain Block 52500 is a quick drying, high performance 100% acrylic latex stain blockingprimer that provides exceptional adhesion and stain blocking properties. This environmentally friendly product may beused interior or exterior to block most bleeding type stains, seal porous surfaces and provide adhesion to hard andglossy surfaces.Recommended Use:Wallboard, Plaster, Sheetrock, Concrete, Masonry, Wood, Aluminum, Galvanized Metal, Plastic Laminates, Vinyl WallCoverings, Previously Painted SurfacesApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be primed must be clean, dry, and free of grease, oil, wax, rust, loose paint, mildew or any surfacecontaminants. Wash glue size off plaster or other surfaces from which wallpaper has been removed.Do not apply over calcimine, casein or other water soluble paints. Fill nicks, holes and voids with appropriate patchingmaterial, sand smooth and remove dust.New plaster and masonry surfaces must be fully cured before priming.Sanding is not required for properly and thoroughly cleaned hard or glossy surfaces, but abrasion of the surface willincrease adhesion of this product.Do not sand plaster until after the surface is primed.Tape joints on sheetrock should be sanded smooth, with care being exercised not to abrade the surrounding paperbacking.Stains: Wipe-Out 100% Acrylic Stain Block hides well to seal many common stains such as crayon,graffiti, greasy spots, water stains, rust, smoke stains, cedar and redwood bleed. Before priming stainedareas, remove as much of the stain as possible by washing, sanding or scraping. Some stains may requiretwo coats. If an active stain discolors this primer, apply the finish coat to a small area to see if the stain is“locked” into the primer. If not, re-prime.Plasticizers must be thoroughly removed from vinyl wall coverings with mineral spirits, proper ventilation and a cleancloth that is changed frequently.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Masonry, Galvanized Metal Wood, Aluminum:1 coat Wipe-Out 100% Acrylic Stain Block 525001 or 2 coats any <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Difficult stains may require the use of Wipe-Out® orWipe-Out Low Odor® Stain Block.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 95/20/2011Wipe-Out® 100% Acrylic Latex Stain Block52500Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 15 @ 60° ± 5Volume Solids: 33.4%±2Solids by Weight: 46.9 % ±2Vehicle: 76.1 % ±2Pigment: 23.9 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 200-250 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
InteriorProduct Description:This is the most economical of primers designed as a first coat on bare surfaces to be topcoated with Contractor LatexFlat.Recommended Use:Wallboard, Sheetrock, Concrete, Masonry BlockApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Wallboard, Sheetrock, Concrete, Masonry, Wood, Acoustical Tile:1 coat Contractor Latex Primer 544001 or 2 coats Contractor Latex Flat 516XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Do not use this product under oil base products,first line latex products or products with any degree of gloss. Do not use under catalyzed epoxies, epoxy polyesters oraliphatic urethanes.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 95/20/2011Contractor Latex Primer54400Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 29.5%±2Solids by Weight: 49.3 % ±2Vehicle: 56.5 % ±2Pigment: 43.5 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F:105KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.6 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 3 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 275-325s.f./gal.Porous: 225-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis quick drying latex first coat will seal unpainted walls and ceilings that may be porous or absorbent. This primersealeris an excellent base coat for latex, alkyd or urethane finish coats.Recommended Use:Wallboard, Plaster, Sheetrock, MasonryApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.We highly recommend the use of 100% acrylic primers for use on unpainted plaster, however, when cost considerationsmake it impractical to use this type of primer certain steps should be taken to minimize the possibility of paint failure.Plaster should be thoroughly dry and should be allowed to cure for at least 7 to 10 days before priming. Washing theplaster with clean water or a mixture of 1 pint white vinegar per gallon of water before priming is also a good idea, asthis will neutralize any surface alkali which could cause peeling or discoloration of the primer and or finish coat.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.2/1/2012ProPrime® Undercoater Primer-Sealer54500Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.2 % ±2Solids by Weight: 51.5 % ±2Vehicle: 55.3 % ±2Pigment: 44.7 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F:100KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteArchitectural Specifications:▪ New or Unfinished Plaster, Wallboard, Sheetrock, Concrete:1 coat ProPrime Undercoater Primer-Sealer 545001 or 2 coats <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not use in areas subject to continuousdampness. Do not apply when air or surface temperature is below 50°F or when drying conditions are poor. Keep fromfreezing. This product may raise the grain of open grain woods. Acrylic Enamel Undercoat or Prime Choice AllSurface Acrylic Primer are better products for these surfaces. Do not use under catalyzed epoxies, epoxy polyesters oraliphatic urethanes.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Package Sizes:Gallon 5 Gallon(Weight Per Gallon: 11.9 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-425s.f./gal.Porous: 200-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Prime Choice All Wall and Trim Primer is a quick drying interior primer-sealer and undercoater for unpainted walls andceilings that may be porous or absorbent. This product is an excellent base-coat for alkyd, oil-modified polyurethane orlatex finish coats. It's ideal for large areas of sheetrock or wallboard where a primer and finish coat will be applied inone day.Recommended Use:Wallboard, Plaster, SheetrockInteriorApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.We highly recommend the use of 100% acrylic primers for use on unpainted plaster, however, when cost considerationsmake it impractical to use this type of primer certain steps should be taken to minimize the possibility of paint failure.Plaster should be thoroughly dry and should be allowed to cure for at least 7 to 10 days before priming. Washing theplaster with clean water or a mixture of 1 pint white vinegar per gallon of water before priming is also a good idea, asthis will neutralize any surface alkali which could cause peeling or discoloration of the primer and or finish coat.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.2/1/2012Prime Choice All Wall and Trim Primer56600Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 34.6 % ±2Solids by Weight: 49.4 % ±2Vehicle: 67.9 % ±2Pigment: 32.1 % ±2Dry Film Thickness: 1.3 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteWax, grease and oil should be removed from the substrate with mineral spirits applied with a cloth. Taped joints onsheetrock should be sanded smooth with care being exercised to avoid abrading the surrounding paper backing. Washnew plaster with clean water, rinsing rags or sponges frequently. Plaster nibs on new plaster should be knifed off butplaster should not be sanded until after the surface has been primed. Fill all voids with prepared vinyl patchingcompound, allow to dry and sand even with the adjacent surfaces.Architectural Specifications:▪ New or Unfinished Plaster, Wallboard, Sheetrock, Concrete:1 coat Prime Choice All Wall and Trim Primer 566001 or 2 coats <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Prime Choice All Wall and Trim Primer should notbe exposed to freezing temperatures while it is curing. Do not use this product under 2-component paints such asepoxies or urethanes. This product should not be used in areas subjected to constant dampness such as bathrooms,cellars and pool areas. Where there are concerns for applications that demonstrate high alkalinity or "hot plaster" or inareas where moist or damp exposures are expected use Prime Choice 50300 All Surface 100% Acrylic Latex Primer.This product may raise the grain of open grain woods.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Package Sizes:Quart Gallon 2 Gallon5 Gallon(Weight Per Gallon: 10.8 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 6 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450 s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorENVIROTECH Zero VOC Primer is an environmentally preferred, quality interior Primer-Sealer Enamel Undercoater.It is an ideal undercoater for new or previously painted surfaces. With essentially no odor during and after application,rooms and offices painted with ENVIROTECH Zero VOC can be occupied right away without a compromise to healthyindoor air quality. Fast-drying ENVIROTECH Primer seals surfaces for uniform finish coat application, texture, glossand color.Recommended Use:Plaster, Sheetrock, Wallboard, Concrete, Masonry block, Wood, previously finished surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Wood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat ENVIROTECH Zero VOC Interior 100% Acrylic Latex Latex Primer-Sealer 646001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series▪ Concrete, Non-Porous Masonry:1 coat ENVIROTECH Zero VOC Interior 100% Acrylic Latex Latex Primer-Sealer 646001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series▪ Wood:1 coat ENVIROTECH Zero VOC Interior 100% Acrylic Latex Latex Primer-Sealer 646001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 SeriesPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50°F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.6/1/2012ENVIROTECH Zero VOC Latex Primer-Sealer EnamelUndercoater 100% Acrylic Latex 64600Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 41.8 % ±2Solids by Weight: 56.5 % ±2Vehicle: 62.4 % ±2Pigment: 34.7 % ±2Dry Film Thickness: 2.3 milsViscosity @ 77 °F:100KU ± 5Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 350-400 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interiorflawless ELEMENTS Zero VOC Primer is an environmentally preferred, premium quality interior Primer-SealerEnamel Undercoater with Microban® antimicrobial protection. It is the perfect undercoater for new or previouslypainted surfaces. With essentially no odor during and after application, rooms and offices painted with flawlessELEMENTS Zero VOC can be occupied right away without a compromise to healthy indoor air quality. Mildewresistant and fast-drying flawless ELEMENTS Primer seals surfaces for uniform finish coat application, texture, glossand color.Recommended Use:Plaster, Sheetrock, Wallboard, Concrete, Masonry block, Wood, previously finished surfaces.flawless ELEMENTS Zero VOC Latex Primer-SealerEnamel Undercoater 100% Acrylic Latex with Microban® 74600Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.5/31/2012Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 42.0 % ±2Solids by Weight: 57.3 % ±2Vehicle: 64.5 % ±2Pigment: 35.5 % ±2Dry Film Thickness: 2.4 milsViscosity @ 77 °F:100KU ± 5Maximum VOC: Calc. 0 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterSurfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Wood - Seal knots and stains with Wipe-Out® , Wipe-Out Low Odor or Wipe-Out 100% Acrylic Stain BlockMasonry Block - Apply one coat of Mason-Cote® Block Filler if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Latex Primer-Sealer 746001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote ® Polyamide Epoxy 1200 Series▪ Concrete, Non-Porous Masonry:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Latex Primer-Sealer 746001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote ® Polyamide Epoxy 1200 Series▪ Wood:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Latex Primer-Sealer 746001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote ® Polyamide Epoxy 1200 SeriesPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50°F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 2 Gallon5 Gallon(Weight Per Gallon: 11.3 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450 s.f./gal.Porous: 350-400 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Prime Choice Alkyd Primer/Sealer/Undercoater & Vapor Barrier is a smooth flowing pigmented interior oil basedprimer formulated to seal highly absorbent wall and ceiling surfaces. This product provides excellent holdout for interiorsurfaces to be topcoated with enamels. It sands easily and provides a superior basecoat for very smooth finish work.The superior sealing qualities of this primer will eliminate "flashing" on cured plaster surfaces that are to be topcoatedwith eggshell, semi-gloss or gloss finishes. This primer can be used as a sealer over surfaces that have suffered fromfire, smoke or water damage.Recommended Use:Plaster, wood, drywall, composition board. The high binder content of this primer makes it ideal for sealing deterioratedold finishes that are checked, cracked or have been partially removed before finish coats of other paints are applied.Prime Choice Alkyd Primer/Sealer/ Undercoater & Vapor Barrier resists vapor transmission and meets FHA and H.U.D.vapor barrier requirements for interior surfaces of exterior walls (ASTM E96-66 rating = 0.85 "Perms"). This is also asuperior product for sealing any surface to which wallcoverings will be applied. Wallcoverings can be removed at afuture date without damaging the sheetrock or skimcoat plaster substrate. This primer can also be used as a sealerover surfaces that have suffered from fire, smoke or water damage.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Wallboard or Sheetrock - Tape joints should be sanded before priming, with care being exersized to prevent abrasion ofthe adjacent paper surface.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots". The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skimcoat plaster a minimum of 10 days to cure. Nibs should be knifed off before priming. Do not sand until aftersurface is primed. Prime Choice Alkyd Primer/Sealer/Undercoater & Vapor Barrier is best applied by brush or roller.This product is of proper consistency as packaged to be applied without thinning under normal environmental andapplication conditions. Clean tools and equipment as soon as possible with mineral spirits. This primer-sealer can betinted with up to 2 oz. <strong>California</strong> Universal Colorants to insure proper hiding. After primer-sealer has properly dried,lightly sand and dust surfaces before finish coating.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Composition Board, Wood:1 Coat Prime Choice Alkyd Primer/Sealer/Undercoater & Vapor Barrier 202001 or 2 coats Alkyd, Latex or Oil Modified Urethane in desired finishFIRE RATING CLASS A (DRY FILM) Test Method ASTM E84 Flame Spread 5 Smoke Density 0Precautions:Do not thin with water or mix with other type paints. Air and surface temperatures should be at least 50ºF duringapplication and drying time. High humidity and inadequate ventilation will increase drying time required before finishcoats can be applied. Wash new plaster with clean water, rinsing rags or sponges frequently. New plaster should bethoroughly dry before priming is started. A moisture content of 15% or less is required to avoid peeling problems. Skimcoat plaster requires a minimum of 10 days to properly cure, full plaster requires a minimum of 30 days. Prime ChoiceAlkyd Primer/Sealer/Undercoater & Vapor Barrier will raise the nap of new sheetrock slightly. Surfaces should besanded before finishing.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.This product contains more than 0.1% crystalline silica (CAS No. 14808-60-07) which has been classified by IARC as aClass 1 carcinogen. Normal application procedures pose no hazard since the silica is wet and encapsulated, butgrinding or sanding dried films may yield respirable silica dusts. Control exposures to less than 0.1 mg/m³ using NIOSHapproved dust filter respirators.DATA/SPECIFICATIONS 9R0016PRIME CHOICEPRIMER/SEALER/UNDERCOATER & VAPOR BARRIOR 20200Product Specifications:Type:AlkydExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 56.3 % ±2Solids by Weight: 75.4 % ±2Vehicle: 50.7 % ±2Pigment: 49.3 % ±2Dry Film Thickness: 2.1 milsViscosity @ 77 °F: 82 KU ±5Maximum VOC: 350 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean Up: Mineral SpiritsAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 2 Gallon5 Gallon(Weight Per Gallon: 11.4 lbs. ± .5 lb)Drying Times:To Touch: 4 hrs.To Handle: 10 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterCAUTION: COMBUSTIBLE! CONTAINS: PETROLEUM DISTILLATE Keep away from heat and flame. To avoidbreathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during applicationand drying. If you experience eye watering, headache or diziness, increase fresh air or wear respiratory protection(NIOSH/MSHA TC 23C or equivalent) or leave the area. Close container after each use. Avoid contact with skin. Usewith adequate ventilation. FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15minutes and call a physician. For skin, wash thoroughly with soap and water. If swallowed, call a physicianimmediately. Never give anything by mouth to an unconscious person. Remove contaminated clothing includingshoes. Wash clothing before re-use. Discard contaminated shoes. NOTICE: Reports have associated repeated andprolonged occupational over-exposure to solvents with permanent brain and nervous system damage. Intentionalmisuse by deliberately concentrating and inhaling the contents may be harmful or fatal.Roller -Short Nap Synthetic orNatural FiberAirless Spray -.011 to .013 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:This premium quality, very low odor, fast dry white primer-sealer is an interior undercoater that prevents the migrationof bleeding stains that show through other primers. Seals water stains on plaster, ceiling tile and sheetrock aftereliminating the moisture source and allowing them to dry. Soot damage and smoke residue that remain after washingor solvent cleaning can be sealed with this product prior to repainting.Recommended Use:Sheetrock, plaster, wallboard, interior wood trim, primed metalApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be clean, dry and free of contaminants such as dust, dirt, oil, grease, wax, loose paint,rust and mill scale. Mildew must be killed by scrubbing with a solution of equal parts household bleach and water.Rinse with clean water and allow to dry. Glossy surfaces should be dulled by sanding and the dust removed.Weathered or abraded wood or any unsound substrates should be sanded back to a paintable surface. After removingrust, prime ferrous metal with a rust inhibiting primer.DATA/SPECIFICATIONS 910/30/2009PRIME CHOICELow Odor Primer/Sealer/Stain Killer 20700Product Specifications:Type:AlkydExposure: InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 52.2 % ±2Solids by Weight: 77.7 % ±2Vehicle: 30.7 % ±2Pigment: 69.3 % ±2Dry Film Thickness: 2.1 milsViscosity @ 77 °F: 82 KU ±5Maximum VOC: 350g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean Up: Mineral SpiritsAvailable Colors and Bases:WhiteThis product should be applied liberally and evenly by brush, roller or spray. In extreme conditions or on poroussurfaces a second coat may be necessary. This material is supplied at proper consistency. Use mineral spirits foreasy clean up of paint tools and equipment immediately after job is completed.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Primed Metal, Wood, Aluminum:1 Coat Prime Choice Low Odor Primer/Sealer/Stain Killer 207001 or 2 coats <strong>California</strong> Latex finishNotes:1. If used as a spot primer on bare interior surfaces, a full coat of the proper primer should be applied before the finishcoat.2. Not recommended for use under organic solvent thinned paints.Precautions:Do not mix with water, oils, other paint types. This is not a vapor barrier and therefore is not suitable for use underwallpaper. Should be topcoated only with latex finish coats as some oil based paints will dissolve this primer. Air andsurface temperature should be 50ºF or more during application and drying times. Do not use when rain is imminent oron humid or foggy days. Use only the specified thinners. Do not mix with water, oils or other paints or solvents. Donot mix with Universal Colorants.Safety Information:CAUTION! COMBUSTIBLE!CONTAINS: PETROLEUM DISTILLATE Keep away from heat and flame. To avoid breathing vapors or spray mist,open windows and doors or use other means to ensure fresh air entry during application and drying. If you experienceeye watering, headache or diziness, increase fresh air or wear respiratory protection (NIOSH/MSHA TC 23C orequivalent) or leave the area. Close container after each use. Avoid contact with skin. Use only with adequateventilation. Keep out of reach of children. Do not take internally.FIRST AID: If swallowed, do not induce vomiting. Call physician immediately.Available Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 13.5 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 1 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-500 s.f./gal.Porous: 200-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorEVERLIFE High Gloss Interior/Exterior Urethane Enamel is a rust inhibitive gloss enamel for use on metal substrates.This enamel dries quickly to a tough glossy finish, and applies easily with brush, roller or spray.Recommended Use:Cabinets, Metal Furniture, Decks, Equipment, Machinery, Tools, ToysApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contaminants.This product is best applied in multiple thin coats at relative humidity levels of 50% or lower in order to allow solvents toevaporate more effectively and aid in the drying process. Heavy coats tend to entrap solvents and can slow the dry timemarkedly. Each coat should be applied with a 16 to 24 hour time span between coats.Previously Painted Surfaces – Contaminants should be removed with a solution of detergent and water, rinsed withclean water and allowed to dry before finishing. Glossy surfaces should be dulled by sanding to ensure proper adhesionof finish coats. Worn or bare areas should be spot primed with an appropriate primer. Allow any primer to thoroughly drybefore top coating.Bare Ferrous Metal – Remove all dust or mill scale by wire brushing or sanding. Solvent clean greasy or oily surfaces.Prime all bare ferrous metals with EVERLIFE® Rust Inhibiting Metal Primer.Application: Stir thoroughly before using. This product is of proper consistency as packaged to be applied withoutthinning under normal environmental and application conditions. EVERLIFE can be tinted with <strong>California</strong> Trillion® orLogicolor® Colorants in amounts not to exceed manufacturer’s recommendations for the base being tinted. Apply withnatural bristle brush or short nap roller using long even strokes. EVERLIFE can also be applied by airless spray with a.012 tip. Multiple coats may be required for deep or ultra deep colors or when painting over a contrasting color. Clean allpainting equipment immediately with mineral spirits.Architectural Specifications:▪ Ferrous Metal - Unprimed:1 coat Everlife Rust-inhibiting oil-based metal primer #221501 or 2 coats <strong>California</strong> Everlife Urethane Enamel 221XXEverlife Urethane Enamel (For Metal Only)Precautions:Alkyd paints oxidize with age so light colors gradually turn yellow. In well lighted areas this yellowing is hardlynoticeable, but in shielded areas alkyd paints may yellow. Air and surface temperatures should be above 50°F or higherduring application and drying time. Insufficient ventilation, high humidity or dampness will greatly increase drying times.Do not use on surfaces to be immersed or on boats below water lines. Do not thin with water or mix with other typepaints. Do not use on unprimed galvanized metal surfaces. All floor and deck coatings are more slippery when thesurface is wet or contaminated with debris. Use caution.Safety Information:CAUTION! COMBUSTIBLE! CONTAINS PETROLEUM DISTILLATES: Keep away from heat and flame. To avoidbreathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during applicationand drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection(NIOSH/MSHA TC 23C or equivalent) or leave the area. Close container after each use. Avoid contact with skin. Ifswallowed, call a physican immediately. Never give anything by mouth to an unconscious person. Treatsymptomatically. NOTICE: Reports have associated repeated and prolonged occupational exposure to solvents withpermanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling thisproduct may be harmful or fatal.2/2/2012221XXProduct Specifications:Type: Oil Modified UrethaneExposure: Interior or ExteriorSpecular Gloss: 80@ 60° ± 5Volume Solids: 52.0 % ±2Solids by Weight: 68.0 % ±2Vehicle: 74.0 % ±2Pigment: 26.0 % ±2Dry Film Thickness: 2.1 milsViscosity @ 77 °F: 80KU ± 5Maximum VOC: 400 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsAvailable Colors and Bases:WhiteDeepMediumPastel16 StockNeutralAvailable Package Sizes:QuartGallon(Weight Per Gallon: 9.6 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 24 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Natural BristleRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorGrip Coat Bonding Primer is a water-based urethane modified acrylic primer-sealer with excellent adhesion to a widevariety of surfaces that usually present difficult adhesion problems. Although it is recommended that a test-patch beapplied before proceeding, since there is such a wide variety of surfaces, PVC, other plastics*, glass, fiberglass, glossypaints, galvanized metal, tile or glazed block surfaces can usually be successfully primed with this product. This productis suitable for interior or exterior exposures. It must be topcoated with latex, alkyd, urethane or waterborne epoxytopcoats.Recommended Use:Plaster, Sheetrock, Wallboard, Concrete, Masonry block, Wood, previously finished surfaces. Also PVC, other plastics*,glass, fiberglass, glossy paints, galvanized metal or glazed block.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.All surfaces should be dry, clean and free of dirt, dust and other contaminants which would interfere with the adhesion orappearance of this primer.Clean the surface by power washing or washing with strong detergent followed by clean water rinse. Remove heavygrease or oil contaminants with solvent such as xylol or lacquer thinner. Reduce gloss by sanding and remove sandingdust. Mildew and mold spores should be removed using bleach solution followed by a clean water rinse.DATA/SPECIFICATIONS 95/9/2011GRIP COAT Bonding Primer50500Product Specifications:Type: Ureth. Modified AcrylicExposure: Interior or ExteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 37.4%±2Solids by Weight: 52.0 % ±2Vehicle: 68.2 % ±2Pigment: 31.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 86KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteGrip Coat Bonding Primer is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Grip Coat Bonding Primer can be applied with a nylon or polyester brush, 3/8" nap roller or airless sprayusing a .017 to .019 tip. Air and surface temperatures should be 50ºF (10ºC) or higher during application and dryingtime.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Concrete, Non-Porous Masonry:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Wood:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane Finish▪ PVC, other plastics*, glass, fiberglass, glossy paints, galvanized metal, tile or glazed block:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane FinishPrecautions:Do not paint on hot surfaces or in direct sun. Do not apply sooner than 4 hours before heavy dew or rain are expectedand be sure there will be at least 24 hours free of rain or high humidity after product application. Ideally, this productshould not be used in bathrooms, pool areas, below grade applications or where continuous water contact occurs.Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Not recommended for use over polypropylene or polyethylene.Available Package Sizes:QuartGallon(Weight Per Gallon: 10.9 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 6 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 200-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis alkali resistant block filler is formulated to fill pores and small voids in masonry and light aggregate block. Thisready-mixed interior vinyl acrylic block filler eliminates pin holing and produces a uniform surface texture ready forfinish coating.Recommended Use:Concrete Block, Porous Masonry and ConcreteApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Masonry block should be “bricked down” so that all concrete nibs and projections are removed from the surface. Loosemortar, dirt, dust, grease and oil must also be removed before applying ProPaint Block Filler 51500. Large concretevoids or cracks should be patched with an appropriate oilfree patching material before painting. ProPaint Block Filler issupplied ready-to-use but can be thinned sparingly with water if necessary. It can be applied by brush, roller or spray.Brush - Use a synthetic nylon or polyester brush and apply material generously to the surface. Work the Filler into themasonry until all voids and hairline cracks are filled. Material should be finished brushed in one direction to create aneven appearance.Roller - Use a synthetic or lambs wool 3/8” - 3/4” nap roller cover. Work material into block and finish roll horizontally.Spray - ProPaint Block Filler is silica free and can be successfully sprayed without doing physical damage to sprayequipment. Heavy duty airless units using a .021 to .028 tip are ideal for large scale block filler applications.Architectural Specifications:▪ Porous Masonry, Block, Concrete:1 coat ProPaint Block Filler 515001 or 2 coats <strong>California</strong>® Latex, Alkyd or Oil-modified Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50 °F or when drying conditions are poor. Keep from freezing. Do not use under catalyzed epoxies, epoxypolyesters or aliphatic urethanes.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.6/1/2012ProPaint® Block Filler51500Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 46.7 % ±2Solids by Weight: 66.3 % ±2Vehicle: 44.0 % ±2Pigment: 56.0 % ±2Dry Film Thickness: 5 milsViscosity @ 77 °F:109KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:5 Gallon(Weight Per Gallon: 13.2 lbs. ± .5 lb)Drying Times:To Touch: 4 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth:N/As.f./gal.Porous: 100-150 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" -3/4" Nap Synthetic FiberAirless Spray -.021 to .028<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorThis non-toxic, 100% acrylic waterborne enamel provides a fast dry gloss finish for many general maintenancerequirements. It provides superior color retention and moisture resistance when used exterior and is rust inhibiting whenapplied in the proper system.Recommended Use:Concrete, wood, wallboard, masonry block, plaster, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. Thiscoating is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Everlife Rust-inhibiting Latex primerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of a masonry block filler if a denser surface is desired.Previously Painted Surfaces - Wash, sand or dust to obtain a paintable surface.Glossy Surfaces - Dull by sanding to insure proper adhesion of paint.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Non-Porous Masonry:1 Coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XXor2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Porous Masonry and Block:1 coat of a masonry block filler1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Ferrous Metal - Unprimed:1 coat Everlife Latex Primer (#52161 white, or #52167 red)1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Ferrous Metal - Primed - Galvanized Metal:1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Do not use in place of House Paint. Remove allmildew before application. For maximum rust inhibiting requirements prime bare ferrous metal with <strong>California</strong> HighPerformance Industrial Prime-Line Metal Primer.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 96/8/2011Everlife 100% Acrylic High GlossWaterborne Enamel 521XXProduct Specifications:Type: 100% Acrylic WaterborneExposure: Interior or ExteriorSpecular Gloss: 80 @ 60° ± 5Volume Solids: 34.2%±2Solids by Weight: 48.5 % ±2Vehicle: 75.6 % ±2Pigment: 22.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 85KU ± 5Maximum VOC: 250 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:White PastelDeep Neutral15 Stock MediumAvailable Package Sizes:QuartGallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 16 hrs.To Recoat: 3 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-425s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorThis white 100% acrylic latex will properly prepare most interior surfaces for wallpaper, foil, flock, canvas backed vinyl,and canvas wall coverings. This one step product bonds to most surfaces eliminating the need for sanding, primingand sizing. The white pigmentation helps hide seams and improve the appearance of thin or slightly transparent wallcoverings. It can also be tinted toward the background color of the wall covering with up to 2 oz. of Universal Colorant.Recommended Use:Gypsum Board, Wallboard, Plaster, Plastic Laminates, Painted Surfaces, Ceramic TileApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. Allsurfaces must be structurally sound before application of this surface primer.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Previously Painted Surfaces - Wash, sand or dust to obtain a paintable surface.Glossy Surfaces - Sanding is not required on properly and thoroughly cleaned hard or glossy surfaces, but abrasion ofthe surface will increase the adhesion of this product.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Wood, Previously Painted Surfaces, Laminates, Tile :1 coat Prep ’n Size II 52401▪ Concrete, Non-Porous Masonry:1 or 2 coats Prep ’n Size II 52401▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 coat Prep ’n Size II 52401Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not use in areas subject to continuousdampness. Do not apply when air or surface temperature is below 50 °F or when drying conditions are poor. Keep fromfreezing. Due to varied job conditions one full strip of wall covering should be hung and checked thoroughly before wallcovering is applied to the entire surface. Do not thin, it can reduce the efficiency of this product. Drying and curingtimes will be longer when Prep’n Size II is tinted.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.6/1/2012Prep ’n Size® II52401Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 25.1 % ±2Solids by Weight: 33.8 % ±2Vehicle: 87.7 % ±2Pigment: 12.3 % ±2Dry Film Thickness: .9 milsViscosity @ 77 °F: 88KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon(Weight Per Gallon: 9.5 lbs. ± .5 lb)Drying Times:To Touch: .3 hrs.To Handle: 4 hrs.To Recoat:hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 450 s.f./gal.Porous:s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorWipe-Out 100% Acrylic Latex Stain Block 52500 is a quick drying, high performance 100% acrylic latex stain blockingprimer that provides exceptional adhesion and stain blocking properties. This environmentally friendly product may beused interior or exterior to block most bleeding type stains, seal porous surfaces and provide adhesion to hard andglossy surfaces.Recommended Use:Wallboard, Plaster, Sheetrock, Concrete, Masonry, Wood, Aluminum, Galvanized Metal, Plastic Laminates, Vinyl WallCoverings, Previously Painted SurfacesApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be primed must be clean, dry, and free of grease, oil, wax, rust, loose paint, mildew or any surfacecontaminants. Wash glue size off plaster or other surfaces from which wallpaper has been removed.Do not apply over calcimine, casein or other water soluble paints. Fill nicks, holes and voids with appropriate patchingmaterial, sand smooth and remove dust.New plaster and masonry surfaces must be fully cured before priming.Sanding is not required for properly and thoroughly cleaned hard or glossy surfaces, but abrasion of the surface willincrease adhesion of this product.Do not sand plaster until after the surface is primed.Tape joints on sheetrock should be sanded smooth, with care being exercised not to abrade the surrounding paperbacking.Stains: Wipe-Out 100% Acrylic Stain Block hides well to seal many common stains such as crayon,graffiti, greasy spots, water stains, rust, smoke stains, cedar and redwood bleed. Before priming stainedareas, remove as much of the stain as possible by washing, sanding or scraping. Some stains may requiretwo coats. If an active stain discolors this primer, apply the finish coat to a small area to see if the stain is“locked” into the primer. If not, re-prime.Plasticizers must be thoroughly removed from vinyl wall coverings with mineral spirits, proper ventilation and a cleancloth that is changed frequently.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Masonry, Galvanized Metal Wood, Aluminum:1 coat Wipe-Out 100% Acrylic Stain Block 525001 or 2 coats any <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Difficult stains may require the use of Wipe-Out® orWipe-Out Low Odor® Stain Block.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 95/20/2011Wipe-Out® 100% Acrylic Latex Stain Block52500Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 15 @ 60° ± 5Volume Solids: 33.4%±2Solids by Weight: 46.9 % ±2Vehicle: 76.1 % ±2Pigment: 23.9 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 200-250 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Interior or ExteriorProduct Description:Stopz® Mold & Mildew Eliminator All Purpose Primer is an extremely durable acrylic coating, developed to withstandmoist and humid conditions that provide the ideal environment for mildew or fungal growth. This easy to apply coatingoffers the ultimate in durability in combination with the excellent characteristics of the prevention of fungus growth on theprimer itself.Recommended Use:Stopz Mold & Mildew Eliminator is designed to stop residual mold and mildew that may grow on the primer afterprecleaning contaminated surfaces, as well as to inhibit the future growth and spread of mold and mildew on the curedfilm surface in residential & institutional buildings. Stopz Mold & Mildew Eliminator is recommended for use on interiorwall surfaces such as plaster, wallboard, Sheetrock®, concrete, masonry block, wood, primed metal and galvanizedmetal. Stopz Mold & Mildew Eliminator is also recommended for use on interior or exterior wood framing, primed metal,concrete, and wallboard inside the wall cavity. Do not use for HVAC system application.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Stopz Mold & Mildew Eliminator is supplied ready to use. Stir thoroughly. Do not mix with any other coatings, solvents orcolors in oil. Remove damaged materials and clean surfaces. Patch surface irregularities with an appropriate patchingcompound. Do not apply when air or surface temperature is below 50º F or when drying conditions are poor. Keep fromfreezing. Use adequate ventilation during application.DATA/SPECIFICATIONS 96/9/2011Stopz® Mold & Mildew Eliminator* All Purpose Primer58300Product Specifications:Type:100% AcrylicExposure: Interior or ExteriorSpecular Gloss: 50 @ 60° ± 0Volume Solids: 32.8%±2Solids by Weight: 42.1 % ±2Vehicle: 85.5 % ±2Pigment: 14.5 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F: 98KU ± 5Maximum VOC: 200 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteRemove gross filth or heavy soil. For heavily soiled areas, a pre-cleaning step is required. Surfaces should bethoroughly scrubbed with a solution of detergent and household bleach (sodium hypocholorite). Apply Stopz Mold &Mildew Eliminator generously and uniformly by brush or airless spray and ensure that the surface is completely coated.Allow to air dry. Clean and inspect regularly for damage to coating film- reapply if cured coating film becomes damaged.Stopz Mold & Mildew Eliminator will kill all existing visible mold and mildew on the wall surface, and then will prevent thegrowth of mold and mildew on the surface of the cured film.Clean tools and drippings with warm soapy water before Stopz Mold& Mildew Eliminator dries.Architectural Specifications:▪Interior walls or wood trim subject to moist conditions, steam, or high humidity conditions (such as kitchens, baths, or abelow grade basement)OPTION 1: 2 coats Stopz Mold & Mildew Eliminator No. 58300 (Product can also be used as a finishcoat)OPTION 2: 1 or 2 coats Stopz Mold & Mildew Eliminator No. 58300 (use 2 coats for severe conditions), 1 or 2 coats<strong>California</strong>® Kitchen and Bath 100% Acrylic Latex with Microban Interior Finish: 512XX (Eggshell) or 513XX(Semigloss)OPTION 3: 1 or 2 coats Stopz Mold & Mildew Eliminator No. 58300 (use 2 coats for severe conditions), 1 or 2 coats<strong>California</strong> 2010, 100% Acrylic Super Scrub® Ceramic with Microban Interior Finish: 551XX (Eggshell), 552XX (Semigloss)or 553XX (Matte).Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:FIRST AID: Have the product label or MSDS with you when calling a poison control center or doctor, or going fortreatment. See product specification for details. FOR MEDICAL ASSISTANCE, CALL YOUR LOCAL POISONCONTROL CENTER. PRECAUTIONARY STATEMENTS: HAZARDS TO HUMANS. CAUTION. KEEP OUT OF REACHOF CHILDREN. Do not take internally. Close container after each use. Harmful if swallowed or inhaled. Avoid breathingspray mist. Avoid contact with skin, eyes, or clothing. Wash thorughly with soap and water after handling. Removecontaminated clothing and wash clothing before reuse. When applying with a sprayer, applicator should wear a filteringrespirator (MSHA/NIOSH approved). PHYSICAL AND CHEMICAL HAZARDS: Do not apply this product in or onelectrical equipment due to the possibility of shock hazard.Available Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 9.7 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 175-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:*Only claim is that this primer contains biocides which will eliminate the growth of mold & mildew on the paint film itself<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Ceiling White is a smooth flowing general purpose ceiling white formulated with the professional applicator in mind. Itprovides good hide and uniform appearance with high production application.Recommended Use:Sheetrock, wallboard, concrete, wood, primed metal, acoustical surfaces, sand and texture finish ceiling.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. CeilingWhite is self-priming over bare sheetrock, composition board, ceiling tile and concrete.DATA/SPECIFICATIONS 9R0016Contractor Ceiling White53900Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 32.3 % ±2Solids by Weight: 52.8 % ±2Vehicle: 53.8 % ±2Pigment: 46.2 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:103 KU ±5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterWallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of ProPaint Block Filler 51500 if a denser surface is desired.Architectural Specifications:▪ Wallboard, Sheetrock:1 or 2 coats Ceiling White 53900▪ Concrete, Non-Porous Masonry:1 or 2 coats Ceiling White 53900▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Ceiling White 53900▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Preference Semi-Gloss 502XX▪ Galvanized Metal:1 coat Larcoloid Acrylic Latex Rust Inhibiting Metal Primer1 or 2 coats Ceiling White 53900Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Colors and Bases:WhiteAvailable Package Sizes:Gallon 5 Gallon(Weight Per Gallon: 12.0 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400 s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
DATA/SPECIFICATIONS 9R0016Pacific® Ceiling White54000Product Description:Product Specifications:Pacific Ceiling White is an anti-spatter, smooth flowing, general purpose ceiling white formulated with the professional Type: Vinyl Acrylic Latexapplicator in mind. It provides a high hiding smooth finish and uniform appearance with high production application.Exposure:InteriorRecommended Use:Specular Gloss: 2 @ 60° ± 2Plaster, sheetrock, wallboard, concrete, masonry block, wood, primed metal, acoustical surfaces, sand and texture finish Volume Solids: 33.4 % ±2ceiling.Solids by Weight: 54.2 % ±2Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.Vehicle:Pigment:52.8 % ±247.2 % ±2EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INDry Film Thickness: 1.3 milsCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourself Viscosity @ 77 °F: 97 KU ±5and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800- 424-LEAD (5323) or log on toMaximum VOC: 100 g/literwww.epa.gov/lead.Flash Pt °F: Non-combustibleSurfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, and Thinner:Waterother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. Pacific Clean Up: Soap & WaterCeiling White is self-priming over bare sheetrock, composition board, ceiling tile and concrete.Available Colors and Bases:New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.WhiteWallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:Available Package Sizes:▪ Plaster, Wallboard, Sheetrock:1 or 2 coats Pacific Ceiling White 54000▪ Concrete, Non-Porous Masonry:1 or 2 coats Pacific Ceiling White 54000▪ Porous Masonry and Block:Gallon 2 Gallon 5 Gallon1 coat Mason-Cote® Block Filler 3751(Weight Per Gallon: 12.2 lbs. ± .5 lb)1 or 2 coats Pacific Ceiling White 54000▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 21150Drying Times:1 or 2 coats Pacific Ceiling White 54000To Touch: .5 hrs.▪ Galvanized Metal:1 coat Larcoloid Acrylic Latex Rust Inhibiting Metal Primer, White 51106, Gray 51108, Red 51176To Handle: 2 hrs.1 or 2 coats Pacific Ceiling White 54000▪ Wood:To Recoat: 2 hrs.1 coat Prime Choice All Surface Acrylic Primer 50300(@ 70-77 °F, 50% R.H.)1 or 2 coats Pacific Ceiling White 54000▪ Acoustical Tile:Surface Spread Rate:1 or 2 coats Pacific Ceiling White 54000Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isSmooth:Porous:400-450350-400s.f./gal.s.f./gal.below 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.(Spray Application is 50% of above)Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGInteriorDiamond Acrylic Ceiling White is the highest quality ceiling white available today. The anti-spatter formulation providesthe industry standard for whiteness, hiding power, adhesion, color retention, and leveling. This product is self-primingover most substrates. For both ease of application and long term durability, this is the finest product for most interiorceiling surfaces.Recommended Use:Plaster, sheetrock, wallboard, concrete, wood, primed metal, acoustical surfaces, sand and texture finish ceilings.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.Diamond Acrylic Ceiling White is self-priming ove bare sheetrock, composition board, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard): New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots." The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed before painting. Do not sand until after thesurface is painted.Ferrous Metal: clean, then prime with Rust Stop® Rust Inhibiting Metal Primer.New Wood: Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block: Apply one coat of Mason-Coat Block Filler 3751 if denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 or 2 coats Diamond Acrylic Latex Ceiling White 54100▪ Concrete, Non-Porous Masonry:1 or 2 coats Diamond Acrylic Latex Ceiling White 54100▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Diamond Acrylic Latex Ceiling White 54100▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer1 or 2 coats Diamond Acrylic Latex Ceiling White 54100▪ Galvanized Metal:1 coat Rust Stop® Acrylic Latex Rust Inhibiting Metal Primer1 or 2 coats Diamond Acrylic Latex Ceiling White 54100▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Diamond Acrylic Latex Ceiling White 54100▪ Acoustical Tile:2 coats 2010 Diamond Acrylic Latex Ceiling White 54100Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 98/2/2010Diamond Acrylic Latex Ceiling White54100Product Specifications:Type: Vinyl Acylic LatexExposure: InteriorSpecular Gloss:Volume Solids:@ 60° ± 232.0 % ±2Solids by Weight: 52.0 % ±2Vehicle: 56.6 % ±2Pigment: 43.4 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 100g/literFlash Pt °F: Non-cumbustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 2 Gallon5 Gallon(Weight Per Gallon: 11.9 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 2 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 350-400 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorPRO 2000 LATEX CEILING FLAT WHITE is an anti-splatter, smooth flowing general purpose ceiling white formulatedwith the professional applicator in mind. It provides a high hiding smooth finish and uniform appearance with highproduction application.Recommended Use:Plaster, sheetrock, wallboard, concrete, wood, primed metal, acoustical surfaces, sand and texture finish ceiling.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. PRO2000 LATEX CEILING FLAT WHITE is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Larcoloid ® Rust Inhibiting Metal PrimerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal Primer.Masonry Block - Apply one coat of Mason-Cote® Block Filler 3751 if a denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 or 2 coats Pro 2000 Latex Ceiling Flat White 55500▪ Concrete, Non-Porous Masonry:1 or 2 coats Pro 2000 Latex Ceiling Flat White 55500▪ Porous Masonry and Block:1 coat ProPaint® Block Filler 515001 or 2 coats Pro 2000 Latex Ceiling Flat White 55500▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Pro 2000 Latex Ceiling Flat White 55500▪ Galvanized Metal:1 coat Larcoloid® Acrylic Latex Rust Inhibiting Metal Primer, White 51106, Gray 51108, Red 511071 or 2 coats Pro 2000 Latex Ceiling Flat White 55500▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Pro 2000 Latex Ceiling Flat White 55500▪ Acoustical Tile:1 or 2 coats Pro 2000 Latex Ceiling Flat White 55500Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Pro 2000® Latex Ceiling Flat White55500Product Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.7 % ±2Solids by Weight: 51.4 % ±2Vehicle: 57.3 % ±2Pigment: 42.7 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:107KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.8 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Ox-O-Flow is a high hiding flat oil base paint developed to seal, prime and finish most porous surfaces in one coat. Ox-O-Flow’s unique formulation allows application over calcimine, casein and other water soluble finishes without removalof the old finish. This quick drying, low odor paint flows on easily and is self-leveling.Recommended Use:Wood, plaster, drywall, primed metal, primed masonryApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.DATA/SPECIFICATIONS 9R0016Ox-O-Flow® Cal Coater70401Product Specifications:Type:Linseed OilExposure:InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 40.4 % ±2Solids by Weight: 67.1 % ±2Vehicle: 41.9 % ±2Pigment: 58.1 % ±2Dry Film Thickness: 2milsViscosity @ 77 °F: 87 KU ±5Maximum VOC: 475 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean Up: Mineral SpiritsPlaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any “hot spots”. The moisture content should be below 15%. Full plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed off before priming. Do not sand until after thesurface is primed with Dry Wall Primer or ASAP or 100% Acrylic Enamel Undercoat.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Prime with Alkyd Primer-Sealer or Dry Wall Primer.Wood - Seal knots and stains with Wipe-Out ® , Wipe-Out Low Odor or Wipe-Out 100% Acrylic Stain BlockFerrous Metal - Clean, then prime with Larcoloid® Rust Inhibiting Metal Primer.Glossy Surfaces - Dull surface by sanding to insure adhesion of paint.Masonry Block - Apply one coat of Mason-Cote® Block Filler if a denser surface is desired or prime with ASAP, DryWall Primer or 100% Acrylic Enamel Undercoat.Architectural Specifications:OX-O-FLOW CAL COATER 70401▪ Plaster, Wallboard, Sheetrock:1 coat Alkyd Primer-Sealer 20200, AllWall® Primer 56600, ASAP® 50300 or 100% Acrylic Enamel Undercoat 546001 or 2 coats Ox-O-Flow Cal Coater 70401▪ Concrete, Non-Porous Masonry:1 coat AllWall Primer 56600, ASAP 50300 or 100% Acrylic Enamel Undercoat 546001 or 2 coats Ox-O-Flow Cal Coater 70401▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Ox-O-Flow Cal Coater 70401▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Ox-O-Flow Cal Coater 70401▪ Galvanized Metal:1 coat Larcoloid Acrylic Latex Rust Inhibiting Metal Primer White 51106, Gray 51108 and Red 51101 or 2 coats Ox-O-Flow Cal Coater 70401▪ Wood:1 coat 100% Alkyd Enamel Undercoater 22200, Acrylic Enamel Undercoat or ASAP 503001 or 2 coats Ox-O-Flow Cal Coater 70401▪ Acoustical Tile:1 coat 100% Acrylic Enamel Undercoat 54600 or ASAP 503001 or 2 coats Ox-O-Flow Cal Coater 70401Precautions:Do not add water, oils or mix with other paints. Do not apply when air or surface temperature is below 50°F or whendrying conditions are poor. Do not use on unprimed plaster, masonry or galvanized surfaces. Ox-O-Flow Cal Coatershould not be used as a primer for latex paints since the weight of topcoats can cause the Ox-O-Flow to pull away fromthe substrate. Also, when Ox-O-Flow is used to coat calcimine, the water from a latex topcoat can seep through anddisrupt adhesion of the water soluble calcimine from its substrate.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not takeinternally. Close container after each use.Available Colors and Bases:WhiteAvailable Package Sizes:QuartGallon(Weight Per Gallon: 11.8 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 6 hrs.To Recoat: 16 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 225-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Natural Bristle, Nylon orPolyesterRoller -Short Nap Synthetic orNaturalAirless Spray -.011 to .013<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGInteriorflawless ELEMENTS Zero VOC Flat Ceiling White is an environmentally preferred, premium quality interior ceilingpaint that provides flawless application and exceptional durability with essentially no odor during and after painting.This product is self-priming over many substrates. Room and office ceilings painted with flawless ELEMENTS ZeroVOC Flat Ceiling White can be occupied right away without a compromise to healthy indoor air quality. WithMicroban® antimicrobial protection, flawless ELEMENTS provides an added level of mildew resistance not found inother Zero VOC paints.Recommended Use:Plaster, sheetrock, wallboard, concrete, wood, primed metal, acoustical surfaces, sand and texture finish ceilings.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.DATA/SPECIFICATIONS 98/2/2010flawless ELEMENTS Zero VOC Acrylic LatexCeiling Flat with Microban® 74100Product Specifications:Type: Vinyl Acrylic LatexExposure: InteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 31.9 % ±2Solids by Weight: 52.0 % ±2Vehicle: 56.6 % ±2Pigment: 43.4 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: Calc. 0g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterSurfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound.flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat is self-priming over bare sheetrock, compositionboard, ceiling tile and concrete.Plaster, Veneer Plaster (Blueboard) - New plaster must be fully cured and should be wiped with a wet sponge toneutralize any "hot spots." The moisture content should be below 15%. Full Plaster requires a minimum of 30 days,skim coat plaster a minimum of 10 days to cure. Nibs should be knifed before painting. Do not sand until after thesurface is painted.Ferrous Metal: clean, then prime with Larcoloid Rust Inhibiting Metal Primer.New Wood: Knots and stains should be sealed with Prime Choice® Oil Based Stain-blocking Primer #20700 or PrimeChoice Universal Latex Stain-blocking Primer #50600 to avoid staining. All wood should then be primed with <strong>California</strong>Prime Choice Alkyd Primer-sealer #20200 or Prime Choice Latex All Surface Primer #50300.Masonry Block: Apply one coat of Mason-Coat Block filler 3751 if denser surface is desired.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 74600 or1 or 2 coats flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat with Microban 74100▪ Concrete, Non-Porous Masonry:1 or 2 coats flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat with Microban 74100▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat with Microban 74100▪ Ferrous Metal - Un-primed:1 coat Rust Stop® Rust Inhibiting Metal Primer 211501 or 2 coats flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat with Microban 74100▪ Galvanized Metal:1 coat Rust Stop® Acrylic Latex Rust Inhibiting Metal Primer1 or 2 coats flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat with Microban 74100▪ Wood:1 coat flawless ELEMENTS Zero VOC Interior 100% Acrylic Latex Primer-Sealer 746001 or 2 coats flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat with Microban 74100▪ Acoustical Tile:2 coats flawless ELEMENTS Zero VOC Interior Acrylic Latex Ceiling Flat with Microban 74100Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.8 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 2 hrs.To Recoat: 2 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 350-400 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGExterior<strong>California</strong> 2010 Velvet Flat House Paint is the finest 100% acrylic latex house paint for use on virtually any exteriorsurface. Its velvet flat formulation provides maximum adhesion, breathability, flexability, color retention, mildew, waterand alkali resistance in a quick drying easily applied finish. 2010 House Paint is self-priming over many new andpreviously painted surfaces. Specific primers are recommended for many new wood surfaces. 2010 represents thelatest in acrylic technology with superior hiding and application characteristics. Offers a trouble free, long lasting finishwhen applied over properly prepared primed surfaces.Recommended Use:Clapboards, shingles, shakes, trim, plywood, alum./vinyl siding, stucco, masonry, brick, asbestos siding, galv. metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and free of surface contaminants. On previously painted surfaces, remove loose or scaly paintby sanding or scraping so that all remaining paint is tightly adhered to the surface. Spot prime all bare spots or badlyeroded areas with Troubleshooter® 100% Acrylic Latex Primer or Universal Oil Wood Primer. All mildewed areasshould be scrubbed with an appropriate mildew eliminating cleaner. Use rubber gloves and safety goggles forprotection during application. Rinse thoroughly with clean water, allow to dry before painting. Excessively chalky, saltyor dusty surfaces and all protected areas should be washed down with fresh water, then hosed clean. Caulk all holesand joints around windows, doors, trim, clapboards and other openings with <strong>California</strong> Caulking Compound. Thinsparingly with water only if necessary to obtain proper application consistency (1/2 pint per gallon). Spray applicationconsistency can be achieved by reducing material with one pint of water to a gallon. Apply paint generously anduniformly. Do not brush out excessively. In hot weather work on shady side of building if possible. Material can beapplied to a damp surface but excess surface moisture must be removed before painting.New Wood Shingles, Shakes, Clapboards, Trim, Plywood, T1-II - Spot prime knots and resin areas with PrimeChoice® Oil Based Stain-Blocking Primer #20700 before priming entire surface with Troubleshooter Latex or OilPrimer. If brown stains show through cedar or other redwoods after priming, these areas should be primed againbefore finish painting.Concrete, Masonry Block - Previously unfinished concrete or dense masonry block can be primed and finished usingtwo coats of 2010 100% Acrylic Latex House Paint Velvet Flat Finish.Stucco, Cement, Asbestos, Siding, Brick - Unpainted but weathered or aged surfaces require a prime coat of Stonite®Masonry Conditioner.Ferrous Metal - Bare metal must be primed with Rust Stop® Rust Inhibiting Metal Primer.Aluminum or Vinyl Siding - 2010 100% Acrylic Latex House Paint Velvet Finish can be applied directly to aluminum orvinyl siding that has been properly washed to remove the oxidation. Vinyl siding, however, can only be painted withwhite or light pastel colors, never darker than the color of the original vinyl siding. Dark paint colors will absorb heatand soften the vinyl siding. 2010 Eggshell or Satin Gloss is a better finish for these surfaces.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat <strong>California</strong> Troubleshooter® Universal Oil or Latex Primer1 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XX▪ New Stucco, Masonry or Cement Asbestos:2 coats <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XX▪ Masonry Block, Porous Concrete:1 coat Mason-Cote® Block Filler 37511 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XX▪ New Galvanized Metal (Downspouts, Facias, Gutters):2 coats <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XX▪ Wood-Repaint:1 coat <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XX▪ Aged Stucco, Masonry or Cement Asbestos:1 coat Stonite® Waterborne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XX▪ Aluminum and Vinyl Siding:1 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XXNotes: Use House Paint Primer Gray under dark colors. Spot prime if needed.Precautions:Do not mix with other paints, solvents or colors in oil. Keep from freezing. Air/surface temperature must be 35°F duringapplication and drying. Do not paint when rain or dew is imminent. Resistant to the deteriorating action of mildew andbacteria. No claim is made for the preservative action to other than the paint film.Safety Information:Keep <strong>California</strong> out of <strong>Paints</strong> reach of ▪ 150 children. Dascomb Do not Rd. take ▪ Andover, internally. MA Close ▪ 01810 container ▪ www.californiapaints.com after use.▪ 800-225-11415/31/20122010 100% Acrylic Latex Velvet Flat400XXProduct Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 36.5 % ±2Solids by Weight: 52.6 % ±2Vehicle: 66.3 % ±2Pigment: 33.7 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:103KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumUltra DeepPastelDeepNeutralAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .109 Tip
Product Description:SELF-PRIMINGExterior2010 100% Acrylic Latex Exterior Eggshell Finish is low sheen 100% acrylic formulated for a truly superior, durable,weather resistant finish and years of lasting protection. It levels nicely to a smooth lustrous sheen with maximumbreathability, color and gloss retention, alkali, mildew and fume resistance and long term flexibility. 2010 House Paintis self-priming over many new and previously painted surfaces. Specific primers are recommended for many new woodsurfaces. It is the latest in acrylic technology with superior hiding and application characteristics. It’s the perfect coatingfor any exterior surface requiring a long lasting beautiful finish.Recommended Use:Clapboards, shingles, shakes, trim, sash, alum./ vinyl siding, shutters, masonry, doors, hardboard, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family, contact the U.S. EPA/Lead Information Hotline at 800-424-LEAD or log on to epa.gov/lead.Surfaces must be clean and free of surface contaminants. On previously painted surfaces, remove all loose or scalypaint by sanding or scraping so that all remaining paint is tightly adhered to the surface. Spot prime all bare spots orbadly eroded areas with Troubleshooter Latex Oil Wood Primer. All mildewed areas should be scrubbed with anappropriate mildew eliminating cleaner. Use rubber gloves and safety goggles for protection during application. Rinsethoroughly with clean water and allow to dry before painting. Excessively chalky, salty or dusty surfaces and allprotected areas should be washed down with fresh water, then hosed clean. Caulk all holes and joints aroundwindows, doors, trim, clapboards and other openings with <strong>California</strong> Caulking Compound. Thin sparingly with wateronly if necessary to obtain proper application consistency (1/2 pint per gallon). Spray application consistency can beachieved by reducing material with one pint of water to a gallon. Apply paint generously and uniformly. Do not brushout excessively. In hot weather work on shady side of building if possible. Material can be applied to a damp surfacebut excess surface moisture must be removed before painting. New Wood Shingles, Shakes, Clapboards, Trim,Plywood, Texture 1-II - Spot prime knots and resin areas with Prime Choice® Oil Based Stain-Blocking Primer #20700before priming entire surface with Troubleshooter Latex or Oil Wood Primer. If brown stains show through cedar orother redwoods after priming, these areas should be primed again before finish painting.Concrete, Masonry Block - Previously unfinished concrete or dense masonry block can be primed and finished usingtwo coats of 2010 100% Acrylic Latex House Paint Eggshell Finish.Stucco, Cement, Asbestos, Siding, Brick - Unpainted but weathered or aged surfaces require a prime coat of Stonite®Masonry Conditioner before finish painting.Ferrous Metal - All bare metal must be primed with Rust Stop® Rust Inhibiting Metal Primer before finish coating.Aluminum or Vinyl Siding - 2010 100% Acrylic Latex House & Trim Paint Eggshell Finish can be applied directly toaluminum or vinyl siding that has been properly washed to remove the oxidation. Vinyl siding, however, can only bepainted with white or light pastel colors, never darker than the color of the original vinyl siding.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat <strong>California</strong> Troubleshooter® Universal Oil Primer or Troubleshooter® 100% Acrylic Latex Primer1 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Eggshell Finish 401XX▪ New Stucco, Masonry or Cement Asbestos:2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Eggshell Finish 401XX▪ Masonry Block, Porous Concrete:1 coat Mason-Cote® Block Filler 37511 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Eggshell Finish 401XX▪ New Galvanized Metal (Downspouts, Facias, Gutters):2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Eggshell Finish 401XX▪ Wood-Repaint:1 coat <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Eggshell Finish 401XX▪ Aged Stucco, Masonry or Cement Asbestos:1 coat Stonite® Waterborne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Eggshell Finish 401XX▪ Aluminum and Vinyl Siding:1 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House Paint Velvet Flat Finish 400XXPrecautions:Do not mix with other paints, solvents or colors in oil. Keep from freezing. Air and surface temperature should beabove 35° F during application and drying. Do not paint when rain or dew is imminent. Is resistant to the deterioratingaction of mildew and bacteria. No claim is made for the preservative action to other than the paint film.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/20122010 100% Acrylic Latex Eggshell401XXProduct Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 15@ 60° ± 5Volume Solids: 39.5 % ±2Solids by Weight: 54.4 % ±2Vehicle: 68.6 % ±2Pigment: 31.4 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F:103KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumUltra DeepPastelDeepNeutralAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.1 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGExterior2010 100% Acrylic Latex Exterior Satin Gloss is a medium gloss offering superior, durable, weather resistant finish andyears of lasting protection. It levels beautifully to a smooth lustrous sheen with maximum breathability, color and glossretention, alkali, mildew and fume resistance and long term flexibility. 2010 House Paint is self-priming over many newand previously painted surfaces. Specific primers are recommended for many new wood surfaces. 2010 representsthe latest technology with superior hiding and application characteristics. It’s the perfect coating for any exteriorsurface requiring a long lasting beautiful satin gloss finish.Recommended Use:Clapboards, shingles, shakes, trim, sash, alum./vinyl siding, shutters, masonry, doors, hardboard, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and free of surface contaminants. On previously painted surfaces, remove all loose or scalypaint by sanding or scraping so that all remaining paint is tightly adhered to the surface. Spot prime all bare spots orbadly eroded areas with Troubleshooter® 100% Acrylic Latex Primer or Universal Oil Wood Primer. All mildewed areasshould be scrubbed with an appropriate mildew eliminating cleaner. Use rubber gloves and safety goggles forprotection during application. Rinse thoroughly with clean water and allow to dry before painting. Excessively chalky,salty or dusty surfaces and all protected areas should be washed down with fresh water, then hosed clean. Caulk allholes and joints around windows, doors, trim, clapboards and other openings with <strong>California</strong> Caulking Compound. Thinsparingly with water only if necessary to obtain proper application consistency (1/2 pint per gallon). Spray applicationconsistency can be achieved by reducing material with one pint of water to a gallon. Apply paint generously anduniformly. Do not brush out excessively. In hot weather work on shady side of building if possible. Material can beapplied to a damp surface but excess surface moisture must be removed before painting.New Wood Shingles, Shakes, Clapboards, Trim, Plywood, Texture III - Spot prime knots and resin areas with PrimeChoice® Oil Based Stain-Blocking Primer #20700 before priming entire surface with Troubleshooter Latex or Oil WoodPrimer. If brown stains show through cedar or other redwoods after priming, spot prime again.Concrete, Masonry Block - Previously unfinished concrete or dense masonry block can be primed and finished usingtwo coats of 2010 100% Acrylic Latex House Paint Satin Gloss Finish.Stucco, Cement, Asbestos, Siding, Brick - Unpainted but weathered or aged surfaces require a prime coat of StoniteMasonry Conditioner before finish painting.Ferrous Metal - All bare metal must be primed with Rust Stop® Rust Inhibiting Metal Primer.Aluminum or Vinyl Siding - 2010 100% Acrylic Latex House & Trim Paint Satin Gloss Finish can be applied directly toaluminum or vinyl siding that has been properly washed to remove the oxidation. Vinyl siding, however, can only bepainted with white or light pastel colors, never darker than the color of the original vinyl siding.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat <strong>California</strong> Troubleshooter® Universal Oil Primer or 100% Acrylic Latex Primer1 or 2 coats <strong>California</strong> 2010 Exterior Satin Gloss Finish▪ New Stucco, Masonry or Cement Asbestos:2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Satin Gloss Finish 402XX▪ Masonry Block, Porous Concrete:1 coat Mason-Cote® Block Filler 37511 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Satin Gloss Finish 402XX▪ New Galvanized Metal (Downspouts, Facias, Gutters):2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Satin Gloss Finish 402XX▪ Wood-Repaint:1 coat <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Satin Gloss Finish 402XX▪ Aged Stucco, Masonry or Cement Asbestos:1 coat Stonite® Waterborne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Satin Gloss Finish 402XX▪ Aluminum and Vinyl Siding:1 or 2 coats <strong>California</strong> 2010 100% Acrylic Latex House & Trim Paint Satin Gloss Finish 402XXNote: Use House Paint Primer Gray under dark colors. Spot prime if needed.Precautions:Do not mix with other paints, solvents or colors in oil. Keep from freezing. Air and surface temperature should beabove 50° F during application and drying time. Do not paint when rain or dew is imminent. 2010 100% Acrylic LatexHouse & Trim Paint Eggshell Finish is resistant to the deteriorating action of mildew and bacteria. No claim is made forthe preservative action to other than the paint film.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-11415/31/20122010 100% Acrylic Latex Satin Gloss402XXProduct Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 36.8 % ±2Solids by Weight: 50.2 % ±2Vehicle: 74.9 % ±2Pigment: 25.2 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F:103KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumUltra DeepPastelDeepNeutralAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.7 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip
Product Description:SELF-PRIMINGExteriorThis is the finest 100% acrylic latex house paint available for use on virtually any exterior surface. It’s premiumformulation provides maximum adhesion, breathability, flexibility, color retention, mildew, water and alkali resistance ina quick drying easily applied finish. Fres~Coat is self-priming over many new and previously painted surfaces. Specificprimers are recommended for many new wood surfaces. This environmentally friendly product gives a trouble free longlasting finish.Recommended Use:Clapboards, shingles, shakes, trim, plywood, alum./ vinyl siding, stucco, masonry, brick, asbestos siding, galv. metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and free of surface contaminants. On previously painted surfaces, remove all loose or scalypaint by sanding or scraping so that all remaining paint is tightly adhered to the surface. Caulk all of the holes andjoints around windows, doors,trim, clapboards and other openings with <strong>California</strong> Caulking Compound. Spot primeon all bare spots or badly eroded areas with Troubleshooter Latex or Oil Primer.Mildewed areas should be scrubbed with a solution of equal parts household bleach and water. For protection userubber gloves and safety goggles. Rinse with clean water and allow to dry before painting.In areas of excessive chalk, salt or dust, areas should be washed down with fresh water, then hosed clean. Thinsparingly with water only if necessary to obtain proper application consistency (1/2 pint per gallon). Fres~Coat 100%Acrylic Latex House Paint can be applied directly to any properly prepared previously painted surface. Spray applicationdoes need to have consistency achieved by reducing material with one pint of water to a gallon. Apply paintgenerously.In hot weather work on shady side of building if possible. Do not brush out excessively. Can be applied to a dampsurface but excess surface moisture must be removed before painting.New Wood Shingles, Shakes, Clapboards, Trim, Plywood, Texture I-II - Spot prime knots and resin areas with PrimeChoice® Oil Based Stain-blocking Primer #20700 before priming entire surface with Troubleshooter Latex or OilPrimer. If brown stains show after priming, spot prime.Concrete, Masonry Block - Previously unfinished concrete or dense masonry block can be primed and finished usingtwo coats of Fres~Coat 100% Acrylic Latex House Paint.Stucco, Cement, Asbestos, Siding, Brick - Unpainted but weathered or aged surfaces require a prime coat of StoniteMasonry Conditioner before finish painting.Ferrous Metal - All bare metal must be primed with Rust Stop® Rust Inhibiting Metal Primer to avoid rusting.Aluminum or Vinyl Siding - Fres~Coat 100% Acrylic Latex House Paint can be applied directly to aluminum or vinylsiding that has been properly washed to remove the oxidation. Vinyl siding, however, can only be painted with white orlight pastel colors, never darker than the color of the original vinyl siding. Dark paint colors will absorb heat and softenthe vinyl siding.Fres~Coat 100% Acrylic LatexVelvet Flat5/31/2012450XXProduct Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 36.6 % ±2Solids by Weight: 52.6 % ±2Vehicle: 66.4 % ±2Pigment: 33.6 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 98KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelDeepNeutral7 StockMediumUltra DeepAvailable Package Sizes:Quart Gallon 2 Gallon5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat <strong>California</strong> Troubleshooter® Universal Oil Primer or Troubleshooter® 100% Acrylic Latex Primer1 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Velvet Flat 450XX▪ New Stucco, Masonry or Cement Asbestos:2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Velvet Flat 450XX▪ Masonry Block, Porous Concrete:1 coat Mason-Cote® Block Filler 37511 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Velvet Flat 450XX▪ New Galvanized Metal (Downspouts, Facias, Gutters):2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Velvet Flat 450XX▪ Wood-Repaint:1 coat <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Velvet Flat 450XX▪ Aged Stucco, Masonry or Cement Asbestos:1 coat Stonite® Waterborne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Velvet Flat 450XX▪ Aluminum and Vinyl Siding:1 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Velvet Flat 450XXNotes: Use House Paint Primer Gray under dark colors. Repeat spot prime if needed.Precautions:Do not mix with other paints, solvents or colors in oil. Keep from freezing. Air and surface temperature must be nolower than 35°F during application and drying time. Do not paint when rain or dew is imminent. Fres~Coat 100%Acrylic Latex House Paint is resistant to the deteriorating action of mildew and bacteria. No claim is made for thepreservative action to other than the paint film.Safety <strong>California</strong> Information:<strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141Keep out of reach of children. Do not take internally. Close container after each use.Surface Spread Rate:Smooth: 375-425s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip
Product Description:SELF-PRIMINGExteriorThis is the finest 100% acrylic latex house paint available for use on virtually any exterior surface. It’s premiumformulation provides maximum adhesion, breathability, flexibility, color retention, mildew, water and alkali resistance ina quick drying easily applied finish. Fres~Coat is self-priming over many new and previously painted surfaces. Specificprimers are recommended for many new wood surfaces. This environmentally friendly product gives a trouble free longlasting finish.Recommended Use:Clapboards, shingles, shakes, trim, plywood, alum./ vinyl siding, stucco, masonry, brick, asbestos siding, galv. metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and free of surface contaminants. On previously painted surfaces, remove all loose or scalypaint by sanding or scraping so that all remaining paint is tightly adhered to the surface. Caulk all of the holes andjoints around windows, doors,trim, clapboards and other openings with <strong>California</strong> Caulking Compound. Spot primeon all bare spots or badly eroded areas with Troubleshooter Latex or Oil Primer.Mildewed areas should be scrubbed with an appropriate mildew eliminating cleaner. For protection use rubber glovesand safety goggles. Rinse with clean water and allow to dry before painting.In areas of excessive chalk, salt or dust, areas should be washed down with fresh water, then hosed clean. Thinsparingly with water only if necessary to obtain proper application consistency (1/2 pint per gallon). Fres~Coat 100%Acrylic Latex House Paint can be applied directly to any properly prepared previously painted surface. Spray applicationdoes need to have consistency achieved by reducing material with one pint of water to a gallon. Apply paintgenerously.In hot weather work on shady side of building if possible. Do not brush out excessively. Can be applied to a dampsurface but excess surface moisture must be removed before painting.New Wood Shingles, Shakes, Clapboards, Trim, Plywood, Texture I-II - Spot prime knots and resin areas with PrimeChoice® Oil Based Stain-blocking Primer #20700 Stain Block before priming entire surface with Troubleshooter Latexor Oil Primer. If brown stains show after priming, spot prime.Concrete, Masonry Block - Previously unfinished concrete or dense masonry block can be primed and finished usingtwo coats of Fres~Coat 100% Acrylic Latex House Paint.Stucco, Cement, Asbestos, Siding, Brick - Unpainted but weathered or aged surfaces require a prime coat of StoniteMasonry Conditioner before finish painting.Ferrous Metal - All bare metal must be primed with Rust Stop® Rust Inhibiting Metal Primer to avoid rusting.Aluminum or Vinyl Siding - Fres~Coat 100% Acrylic Latex House Paint can be applied directly to aluminum or vinylsiding that has been properly washed to remove the oxidation. Vinyl siding, however, can only be painted with white orlight pastel colors, never darker than the color of the original vinyl siding. Dark paint colors will absorb heat and softenthe vinyl siding.Fres~Coat 100% Acrylic LatexLow Luster5/31/2012455XXProduct Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 8 @ 60° ± 2Volume Solids: 38.6 % ±2Solids by Weight: 52.4 % ±2Vehicle: 71.2 % ±2Pigment: 28.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 98KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat <strong>California</strong> Troubleshooter® Universal Oil Primer or Troubleshooter® 100% Acrylic Latex Primer1 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Low Luster 455XX▪ New Stucco, Masonry or Cement Asbestos:2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Low Luster 455XX▪ Masonry Block, Porous Concrete:1 coat Mason-Cote® Block Filler 37511 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Low Luster 455XX▪ New Galvanized Metal (Downspouts, Facias, Gutters):2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Low Luster 455XX▪ Wood-Repaint:1 coat <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Low Luster 455XX▪ Aged Stucco, Masonry or Cement Asbestos:1 coat Stonite® Waterborne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Low Luster 455XX▪ Aluminum and Vinyl Siding:1 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House Paint Low Luster 455XXNotes: Use House Paint Primer Gray under dark colors. Repeat spot prime if needed.Precautions:Do not mix with other paints, solvents or colors in oil. Keep from freezing. Air and surface temperature must be nolower than 35°F during application and drying time. Do not paint when rain or dew is imminent. Fres~Coat 100%Acrylic Latex House Paint is resistant to the deteriorating action of mildew and bacteria. No claim is made for thepreservative action to other than the paint film.Safety <strong>California</strong> Information:<strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141Keep out of reach of children. Do not take internally. Close container after each use.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip
Product Description:ExteriorThis economical low luster latex has excellent adhesion to properly prepared surfaces and resists ultraviolet rayshelping to retain its color for years. Pacific Exterior Low Luster is smooth flowing, alkali & dirt resistant and suitable formost surfaces.Recommended Use:Clapboards, wood, shingles, shakes, stucco, masonry, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Heavy chalk should be washed from the surface. Remove all peeling, blistering or loose paint. Cracked or checkedpaint should be removed by scraping or sanding. Mildewed areas should be scrubbed with an appropriate mildeweliminating cleaner then hosed down with clean water and allowed to dry. For personal protection wear rubber glovesand safety goggles during this procedure. Nail holes, cracks and voids should be caulked with <strong>California</strong> CaulkingCompound and knots sealed with Wipe-Out ® , Wipe-Out Low Odor or Wipe-Out 100% Acrylic Stain BlockWood Surfaces - Prime all bare wood surfaces with Pacific Exterior Primer Alkyd or Latex. Spot prime all bare woodareas on previously painted surfaces. If staining appears after priming cedar or other redwoods, these areas should bereprimed before painting.Concrete, Masonry Block - Unfinished concrete or block should be primed and finished with two coats of PacificExterior Low Luster. Porous block may require a prime coat of Mason-Cote® Block Filler 3751.Unpainted chalky masonry, aged stucco, cement, asbestos and brick should be primed with Stonite® MasonryConditioner to insure adhesion.Ferrous Metal - Prime all bare metal with Larcoloid® Rust Inhibiting Metal Primer.Hardboard Siding - All bare or factory pre-primed hardboard should be primed with <strong>California</strong> Troubleshooter®Universal Wood Primer or severe staining can occur.Aluminum or Vinyl Siding - Wash off all chalk and rinse with clean water. <strong>California</strong> Satin Gloss 100% Acrylic LatexHouse Paint provides a superior finish on these surfaces.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat Pacific Exterior Primer Latex or Oil1 or 2 coats Pacific Exterior Low Luster 460XX▪ Concrete, Non-Porous Masonry:2 coats Pacific Exterior Low Luster 460XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Pacific Exterior Low Luster 460XX▪ Ferrous Metal - Unprimed:1 coat Larcoloid® Rust Inhibiting Metal Primer1 or 2 coats Pacific Exterior Low Luster 460XX▪ Ferrous Metal - Primed - Galvanized Metal:2 coats Pacific Exterior Low Luster 460XX▪ Hardboard Siding:1 coat <strong>California</strong> Fres~Coat Troubleshooter® Alkyd/Linseed Oil Wood Primer 217001 or 2 coats Pacific Exterior Low Luster 460XXPrecautions:Do not paint when rain or dew is possible during drying and curing. Do not use on surfaces subject to continuousmoisture. Do not mix with other paints or solvents. Air and surface temperature should be above 35° F duringapplication and curing. Avoid application in direct sunlight.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Pacific® Latex Low Luster460XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:ExteriorSpecular Gloss: 8 @ 60° ± 2Volume Solids: 34.6 % ±2Solids by Weight: 50.8 % ±2Vehicle: 68.1 % ±2Pigment: 31.9 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F: 97KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteMediumNeutralPastelDeep6 ColorsAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 200-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ExteriorPacific Exterior Latex Satin Gloss provides a satin gloss sheen for durable, weather resistant finish and years of lastingprotection. It levels beautifully to a smooth lustrous sheen with good breathability, color and gloss retention, alkali,mildew and fume resistance.Recommended Use:Clapboards, wood, shingles, shakes, stucco, masonry, primed metal, asbestos shingles, masonry block, brick.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Heavy chalk should be washed from the surface. Remove all peeling, blistering or loose paint. Cracked or checkedpaint should be removed by scraping or sanding. Mildewed areas should be scrubbed with an appropriate mildeweliminating cleaner then hosed down with clean water and allowed to dry. For personal protection wear rubber glovesand safety goggles during this procedure. Nail holes, cracks and voids should be caulked with <strong>California</strong> CaulkingCompound and knots sealed with Wipe-Out® , Wipe-Out Low Odor or Wipe-Out 100% Acrylic Stain BlockWood Surfaces - Prime all bare wood surfaces with Pacific Exterior Primer Alkyd or Latex. Spot prime all bare woodareas on previously painted surfaces. If staining appears after priming cedar or other redwoods, these areas should bereprimed before painting.Concrete, Masonry Block - Unfinished concrete or block should be primed and finished with two coats of PacificExterior Latex Satin Gloss. Porous block may require a prime coat of Mason-Cote® Block Filler 3751. Unpaintedchalky masonry, aged stucco, cement, asbestos and brick should be primed with Stonite® Masonry Conditioner toinsure adhesion.Ferrous Metal - Prime all bare metal with Larcoloid® Rust Inhibiting Metal Primer.Hardboard Siding - All bare or factory pre-primed hardboard should be primed with <strong>California</strong> Troubleshooter®Universal Wood Primer or severe staining can occur.Aluminum or Vinyl Siding - Wash off all chalk and rinse with clean water. <strong>California</strong> Satin Gloss 100% Acrylic LatexHouse Paint provides a superior finish on these surfaces.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat Pacific Exterior Primer Latex or Oil1 or 2 coats Pacific Exterior Latex Satin Gloss 462XX▪ Concrete, Non-Porous Masonry:2 coats Pacific Exterior Latex Satin Gloss 462XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Pacific Exterior Latex Satin Gloss 462XX▪ Ferrous Metal - Unprimed:1 coat Larcoloid® Rust Inhibiting Metal Primer1 or 2 coats Pacific Exterior Latex Satin Gloss 462XX▪ Ferrous Metal - Primed - Galvanized Metal:2 coats Pacific Exterior Latex Satin Gloss 462XX▪ Hardboard Siding:1 coat <strong>California</strong> Fres~Coat Troubleshooter® Alkyd/Linseed Oil Wood Primer 217001 or 2 coats Pacific Exterior Latex Satin Gloss 462XXPrecautions:Do not paint when rain or dew is possible during drying and curing. Do not use on surfaces subject to continuousmoisture. Do not mix with other paints or solvents. Air and surface temperature should be above 50° F duringapplication and curing. Avoid application in direct sunlight.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*White, Pastel and Ultra Deep bases available in 5 gallon quantities.5/31/2012Pacific® Latex Satin Gloss462XXProduct Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 28.1 % ±2Solids by Weight: 40.3 % ±2Vehicle: 79.1 % ±2Pigment: 20.9 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: 98KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:White*Ultra Deep*DeepPastel*MediumAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 10.1 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 200-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ExteriorThis economical flat latex has excellent adhesion to properly prepared surfaces and resists ultraviolet rays helping toretain its color for years. Pacific Exterior Flat is smooth flowing, alkali & dirt resistant and suitable for most surfaces.Recommended Use:Clapboards, wood, shingles, shakes, stucco, masonry, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Heavy chalk should be washed from the surface. Remove all peeling, blistering or loose paint. Cracked or checkedpaint should be removed by scraping or sanding. Mildewed areas should be scrubbed an appropriate mildeweliminating cleaner then hosed down with clean water and allowed to dry. For personal protection wear rubber glovesand safety goggles during this procedure. Nail holes, cracks and voids should be caulked with <strong>California</strong> CaulkingCompound and knots sealed with Wipe-Out ® , Wipe-Out Low Odor or Wipe-Out 100% Acrylic Stain BlockWood Surfaces - Prime all bare wood surfaces with Pacific Exterior Primer Alkyd or Latex. Spot prime all bare woodareas on previously painted surfaces. If staining appears after priming cedar or other redwoods, these areas should bereprimed before painting.Concrete, Masonry Block - Unfinished concrete or block should be primed and finished with two coats of PacificExterior Flat. Porous block may require a prime coat of Mason-Cote® Block Filler 3751. Unpainted chalky masonry,aged stucco, cement, asbestos and brick should be primed with Stonite® Masonry Conditioner to insure adhesion.Ferrous Metal - Prime all bare metal with Larcoloid® Rust Inhibiting Metal Primer.Hardboard Siding - All bare or factory pre-primed hardboard should be primed with <strong>California</strong> Troubleshooter®Universal Wood Primer or severe staining can occur.Aluminum or Vinyl Siding - Wash off all chalk and rinse with clean water. <strong>California</strong> Satin Gloss 100% Acrylic LatexHouse Paint provides a superior finish on these surfaces.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat Pacific Exterior Primer Latex or Oil1 or 2 coats Pacific Exterior Flat 463XX▪ Concrete, Non-Porous Masonry:2 coats Pacific Exterior Flat 463XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Pacific Exterior Flat 463XX▪ Ferrous Metal - Unprimed:1 coat Larcoloid® Rust Inhibiting Metal Primer1 or 2 coats Pacific Exterior Flat 463XX▪ Ferrous Metal - Primed - Galvanized Metal:2 coats Pacific Exterior Flat 463XX▪ Hardboard Siding:1 coat <strong>California</strong> Fres~Coat Troubleshooter® Alkyd/Linseed Oil Wood Primer 217001 or 2 coats Pacific Exterior Flat 463XXPrecautions:Do not paint when rain or dew is possible during drying and curing. Do not use on surfaces subject to continuousmoisture. Do not mix with other paints or solvents. Air and surface temperature should be above 35° F duringapplication and curing. Avoid application in direct sunlight.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Pacific® Latex Flat463XXProduct Specifications:Type: Vinyl Acrylic LatexExposure:ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 39.5 % ±2Solids by Weight: 56.3 % ±2Vehicle: 63.0 % ±2Pigment: 37.0 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F: 97KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelDeep6 StockMediumNeutralAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.6 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 6 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:SELF-PRIMINGExteriorThis satin gloss 100% acrylic finish provides a truly superior, durable, weather resistant finish for years of lastingprotection. It levels beautifully to a smooth lustrous finish with maximum breathability, color and gloss retention, alkali,mildew and fume resistance and long term flexibility. Fres~Coat is self-priming over many new and previously paintedsurfaces. Specific primers are recommended for many new wood surfaces. It is the perfect coating for any exteriorsurface requiring a long lasting beautiful satin gloss finish.Recommended Use:Clapboards, shingles, shakes, trim, plywood, alum./vinyl siding, stucco, masonry, brick, asbestos siding, galv. metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE,ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPAvacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/LeadInformation Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and free of surface contaminants.Remove all loose or scaly paint by sanding or scraping sothat all remaining paint is tightly adhered to the surface. Spot prime all bare spots or badly eroded areas withTroubleshooter Latex or Oil Primer. All mildewed areas should be scrubbed with an appropriate mildew eliminatingcleaner. Use rubber gloves and safety goggles for protection. Rinse thoroughly with clean water and allow to dry beforepainting. Excessively chalky, salty or dusty surfaces and all protected areas should be washed down with fresh water,then hosed clean. Caulk all holes and joints around windows, doors, trim, clapboards and other openings with<strong>California</strong> Caulking Compound. Thin sparingly with water only if necessary to obtain proper application consistency(1/2 pint per gallon). Spray application consistency can be achieved by reducing material with one pint of water to agallon. Apply paint generously and uniformly. Do not brush out excessively. In hot weather work on shady side ofbuilding if possible. Material can be applied to a damp surface but excess surface moisture must be removed beforepainting.New Wood Shingles, Shakes, Clapboards, Trim, Plywood, Texture I-II - Spot prime knots and resin areas with PrimeChoice® Oil Based Stain-blocking Primer #20700 before priming entire surface with Troubleshooter Latex or OilPrimer. If stains show through, spot prime.Concrete, Masonry Block - Previously unfinished concrete or dense masonry block can be primed and finished usingtwo coats of Fres~Coat Satin Gloss.Stucco, Cement, Asbestos, Siding, Brick - Unpainted but weathered or aged surfaces require a prime coat of Stonite®Masonry Conditioner before finish painting.Ferrous Metal - All bare metal must be primed with Rust Stop® Rust Inhibiting Metal Primer.Aluminum or Vinyl Siding - Freshcoat 100% Acrylic Latex House & Trim Paint can be applied directly to aluminum orvinyl siding that has been properly washed to remove the oxidation. Vinyl siding, however, can only be painted withwhite or light pastel colors, never darker than the color of the original vinyl siding. Dark paint colors will absorb heatand soften the vinyl siding.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat <strong>California</strong> Troubleshooter® Universal Oil Primer or Troubleshooter® 100% Acrylic Latex Primer1 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House & Trim Paint Satin Gloss 471XX▪ New Stucco, Masonry or Cement Asbestos:2 coats <strong>California</strong> Fres~Coat100% Acrylic Latex House & Trim Paint Satin Gloss 471XX▪ Masonry Block, Porous Concrete:1 coat Mason-Cote® Block Filler 37511 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House & Trim Paint Satin Gloss 471XX▪ New Galvanized Metal (Downspouts, Facias, Gutters):2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House & Trim Paint Satin Gloss 471XX▪ Wood-Repaint:1 coat <strong>California</strong> Fres~Coat 100% Acrylic Latex House & Trim Paint Satin Gloss 471XX▪ Aged Stucco, Masonry or Cement Asbestos:1 coat Stonite® Waterborne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House & Trim Paint Satin Gloss 471XX▪ Aluminum and Vinyl Siding:1 or 2 coats <strong>California</strong> Fres~Coat 100% Acrylic Latex House & Trim Paint Satin Gloss 471XXNote: Use House Paint Primer Gray under dark colors. If staining bleeds through primer, spot prime.Precautions:Do not mix with other paints, solvents or colors in oil. Keep from freezing. Air and surface temperature should beabove 50° F during application and drying time. Do not paint when rain or dew is imminent. Fres~Coat 100% AcrylicLatex House & Trim Paint is resistant to the deteriorating action of mildew and bacteria. No claim is made for thepreservative action to other than the paint film.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141Fres~Coat 100% Acrylic LatexSatin Gloss5/31/2012471XXProduct Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 45@ 60° ± 5Volume Solids: 34.8 % ±2Solids by Weight: 48.6 % ±2Vehicle: 76.3 % ±2Pigment: 23.7 % ±2Dry Film Thickness: 1.3 milsViscosity @ 77 °F:103KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhitePastelDeepNeutral9 StockMediumUltra DeepAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.6 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 8 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip
Product Description:This is the finest quality, all-purpose alkyd semi-gloss enamel available. This hard, durable finish flows on easily andlevels to a beautiful smooth lustrous finish. Used as is or tinted according to directions, this hard, durable non-industrialfinish will help prevent rusting of ferrous metal substrates. Alkyd paints oxidize with age so light colors will eventuallyshow yellowing, expecially in poorly lighted areas.Recommended Use:Metal Doors ▪ Handrails ▪ Household Tools ▪ Garden Equipment ▪ Steel ShelvingApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/leadSurfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination.Stir thoroughly before using to insure proper dispersion. This product is of proper consistency as packaged to beapplied without thinning under normal environmental and application conditions.This product can be tinted with Universal Colorants but the amount of colorant should not exceed the amountrecommended for the tint base used.Apply by brush or roller using long strokes. Two coats are generally required for deep and ultra deep colors or whenpainting over a contrasting color. Apply paint on a small area, allow it to dry and approve for accuracy beforecompleting the job.DATA/SPECIFICATIONS 9R0016Fres~Coat Alkyd Semi-GlossRust Preventative for Metal Substrates 210XXProduct Specifications:Type:AlkydExposure: Interior or ExteriorSpecular Gloss: 60@ 60° ± 5Volume Solids: 56.5 % ±2Solids by Weight: 74.9 % ±2Vehicle: 57.7 % ±2Pigment: 42.8 % ±2Dry Film Thickness: 2.0 milsViscosity @ 77 °F: 80 KU ±5Maximum VOC: 400 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean Up: Mineral SpiritsAvailable Colors and Bases:White PastelMedium DeepUltra Deep NeutralPreviously painted surfaces in good condition do not require a primer. One coat of Fres~Coat Alkyd Enamel is usuallysufficient while two coats will provide more durability. On new or previously painted metal surfaces where rusting is aproblem, remove all traces of rust by sandpaper, scraper or mechanical means and prime with a rust-inhibitive primersuch as Larcoloid® Inhibiting Metal Primer and finish with 1 or 2 coats of Fres~Coat Alkyd Enamel.Ferrous Metal - Clean, then prime with Larcoloid Rust Inhibiting Metal Primer.Glossy Surfaces - Dull surface by sanding to insure adhesion of paint.Architectural Specifications:▪ Ferrous Metal - Un-primed:1 coat Larcoloid Rust Inhibiting Metal Primer 211501 or 2 coats Fres~Coat Alkyd Semi-Gloss 210XX*▪ Galvanized Metal:1 coat Larcoloid Acrylic Latex Rust Inhibiting Metal Primer White 51106, Gray 51108 and Red 511071 or 2 coats Fres~Coat Alkyd Semi-Gloss 210XX*Precautions:Do not add water, oils or mix with other paints. Do not apply when air or surface temperature is below 50°F or whendrying conditions are poor. Do not use on unprimed galvanized surfaces.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not take internally.Close container after each use.*Note: Maximum hardness is achieved in 3-4 weeks.Available Package Sizes:Quart Gallon(Weight Per Gallon: 11.1 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 16 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-500 s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorNexTech Water Reducible Alkyd Satin Finish EnamelNexTech Waterborne Satin Finish Enamel is an alkyd dispersion – the next step in waterborne technology. NexTech isa premium enamel that incorporates all of the positive attributes of alkyd/oil based paints with the benefit of soap andwater cleanup, extremely low VOC’s and almost NO odor. NexTech applies easily, dries quickly and levels whenbrushed, like a sprayed-on finish. It’s a hard, durable coating which virtually eliminates blocking (the tendency of driedpainted to stick to itself or for books and other objects to stick to a painted surface). NexTech can be used on interiorand exterior surfaces.Recommended Use:For properly prepared interior and exterior surfaces such as wood, drywall, primed masonry, primed plaster and primedmetal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.SURFACE PREPARATION: Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, gluesize, calcimine, wax, soap, and other surface contamination. Patch irregularities with vinyl patching paste or anappropriate patching compound. NexTech Alkyd Dispersion is self-priming over previously painted surfaces in soundscondition as well as bare sheetrock, composition board, ceiling tile and concrete. Additional details productsspecifications for various surfaces and Material Safety Data Sheet are available online at www.californiapaints.comAPPLICATION: This product is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Product can be applied by airless spray with a 0.017 to 0.019 tip. Air and surface temperatures should be50°F (10°C) or higher during application and drying time. To prevent the addition of VOC’s, this product should betinted with <strong>California</strong> Trillion® Super Strength Colorant. Check color for accuracy before application.CLEAN UP: Clean brushes and rollers with warn soapy water. A final rinse of mineral spirits is recommended toremove residual alkyd.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:Plaster/ Wallboard/Sheetrock: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Satin Finish.Concrete/Non Porous Masonry: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Satin Finish.Porous Masonry and Block: 1 coat Mason Cote® Block Filler. 1 or 2 coats NexTech Satin Finish.Ferrous Metal- Unprimed: 1 or 2 coats Everlife® Alkyd or 100% Acrylic Metal Primer.1 or 2 coats NexTech Satin Finish.Galvanized Metal: 1 or 2 coats Everlife 100% Acrylic Metal Primer.1 or 2 coats NexTech Satin Finish.Wood: 1 or 2 coats of <strong>California</strong> Oil Base or Acrylic primer (interior or exterior).1 or 2 coats NexTech Satin Finish.Precautions:NexTech will tend to yellow slightly in the absence of natural or artificial light (much less than typical alkyds). Do notuse tint bases unstinted. Temperature of air and surface should be at least 50°F during application and curing time.Inadequate ventilation or high humidity will lengthen drying time. All colors should be applied on a small area, allowedto dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.CAUTION: Use only with adequate ventilation. Do not breathe spray mist or sanding dust. Ensure fresh air entry duringapplication and drying. Avoid contact with eyes and prolonged or repeated contact with skin. Avoid exposure to dustand spray mist by wearing a NIOSH approved respirator during application, sanding and clean up. Follow respiratormanufacturer’s directions for respirator use. Close container after each use. Wash thoroughly after handling.FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15 minutes; for skin, washthoroughly with soap and water. If symptoms persist, seek medical attention. If you experience difficulty breathing,leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.5/31/2012219XXProduct Specifications:Type: Waterborne AlkydExposure: Interior or ExteriorSpecular Gloss:40° @ 60° ± 2Volume Solids: 42.5 % ±2Solids by Weight: 57.8 % ±2Vehicle: 67 % ±2Pigment: 33 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F:100KU ± 5Maximum VOC:
Product Description:Interior or ExteriorNexTech Water Reducible Alkyd Semi-Gloss EnamelNexTech Waterborne Semi-Gloss Enamel is an alkyd dispersion – the next step in waterborne technology. NexTech isa premium enamel that incorporates all of the positive attributes of alkyd/oil based paints with the benefit of soap andwater cleanup, extremely low VOC’s and almost NO odor. NexTech applies easily, dries quickly and levels whenbrushed, like a sprayed-on finish. It’s a hard, durable coating which virtually eliminates blocking (the tendency of driedpainted to stick to itself or for books and other objects to stick to a painted surface). NexTech can be used on interiorand exterior surfaces.Recommended Use:For properly prepared interior and exterior surfaces such as wood, drywall, primed masonry, primed plaster and primedmetal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.SURFACE PREPARATION: Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, gluesize, calcimine, wax, soap, and other surface contamination. Patch irregularities with vinyl patching paste or anappropriate patching compound. NexTech Alkyd Dispersion is self-priming over previously painted surfaces in soundscondition as well as bare sheetrock, composition board, ceiling tile and concrete. Additional details productsspecifications for various surfaces and Material Safety Data Sheet are available online at www.californiapaints.comAPPLICATION: This product is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Product can be applied by airless spray with a 0.017 to 0.019 tip. Air and surface temperatures should be50°F (10°C) or higher during application and drying time. To prevent the addition of VOC’s, this product should betinted with <strong>California</strong> Trillion® Super Strength Colorant. Check color for accuracy before application.CLEAN UP: Clean brushes and rollers with warn soapy water. A final rinse of mineral spirits is recommended toremove residual alkyd.DISPOSAL: For recycling guidance of any unused amount, contact your local or provincial organization of recoveryand recycling. Dry, empty containers may be recycled in a can recycling program where facilities are available.Architectural Specifications:Plaster/ Wallboard/Sheetrock: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Semi-Gloss Finish.Concrete/Non Porous Masonry: 1 coat <strong>California</strong> Primer Sealer. 1 or 2 coats NexTech Semi-Gloss Finish.Porous Masonry and Block: 1 coat Mason Cote® Block Filler. 1 or 2 coats NexTech Semi-Gloss Finish.Ferrous Metal- Unprimed: 1 or 2 coats Everlife® Alkyd or 100% Acrylic Metal Primer. 1 or 2 coats NexTech Semi-Gloss Finish.Galvanized Metal: 1 or 2 coats Everlife 100% Acrylic Metal Primer. 1 or 2 coats NexTech Semi-Gloss Finish.Wood: 1 or 2 coats of <strong>California</strong> Oil Base or Acrylic primer (interior or exterior). 1 or 2 coats NexTech Semi-GlossFinish.Precautions:NexTech will tend to yellow slightly in the absence of natural or artificial light (much less than typical alkyds). Do notuse tint bases unstinted. Temperature of air and surface should be at least 50°F during application and curing time.Inadequate ventilation or high humidity will lengthen drying time. All colors should be applied on a small area, allowedto dry and approved for accuracy before doing the job.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.CAUTION: Use only with adequate ventilation. Do not breathe spray mist or sanding dust. Ensure fresh air entry duringapplication and drying. Avoid contact with eyes and prolonged or repeated contact with skin. Avoid exposure to dustand spray mist by wearing a NIOSH approved respirator during application, sanding and clean up. Follow respiratormanufacturer’s directions for respirator use. Close container after each use. Wash thoroughly after handling.FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15 minutes; for skin, washthoroughly with soap and water. If symptoms persist, seek medical attention. If you experience difficulty breathing,leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.5/31/2012220XXProduct Specifications:Type: Waterborne AlkydExposure: Interior or ExteriorSpecular Gloss: 60@ 60° ± 2Volume Solids: 42 % ±2Solids by Weight: 56.1 % ±2Vehicle: 71.1 % ±2Pigment: 28.8 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F: 93KU ± 5Maximum VOC:
Product Description:Interior or ExteriorEVERLIFE High Gloss Interior/Exterior Urethane Enamel is a rust inhibitive gloss enamel for use on metal substrates.This enamel dries quickly to a tough glossy finish, and applies easily with brush, roller or spray.Recommended Use:Cabinets, Metal Furniture, Decks, Equipment, Machinery, Tools, ToysApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contaminants.This product is best applied in multiple thin coats at relative humidity levels of 50% or lower in order to allow solvents toevaporate more effectively and aid in the drying process. Heavy coats tend to entrap solvents and can slow the dry timemarkedly. Each coat should be applied with a 16 to 24 hour time span between coats.Previously Painted Surfaces – Contaminants should be removed with a solution of detergent and water, rinsed withclean water and allowed to dry before finishing. Glossy surfaces should be dulled by sanding to ensure proper adhesionof finish coats. Worn or bare areas should be spot primed with an appropriate primer. Allow any primer to thoroughly drybefore top coating.Bare Ferrous Metal – Remove all dust or mill scale by wire brushing or sanding. Solvent clean greasy or oily surfaces.Prime all bare ferrous metals with EVERLIFE® Rust Inhibiting Metal Primer.Application: Stir thoroughly before using. This product is of proper consistency as packaged to be applied withoutthinning under normal environmental and application conditions. EVERLIFE can be tinted with <strong>California</strong> Trillion® orLogicolor® Colorants in amounts not to exceed manufacturer’s recommendations for the base being tinted. Apply withnatural bristle brush or short nap roller using long even strokes. EVERLIFE can also be applied by airless spray with a.012 tip. Multiple coats may be required for deep or ultra deep colors or when painting over a contrasting color. Clean allpainting equipment immediately with mineral spirits.Architectural Specifications:▪ Ferrous Metal - Unprimed:1 coat Everlife Rust-inhibiting oil-based metal primer #221501 or 2 coats <strong>California</strong> Everlife Urethane Enamel 221XXEverlife Urethane Enamel (For Metal Only)Precautions:Alkyd paints oxidize with age so light colors gradually turn yellow. In well lighted areas this yellowing is hardlynoticeable, but in shielded areas alkyd paints may yellow. Air and surface temperatures should be above 50°F or higherduring application and drying time. Insufficient ventilation, high humidity or dampness will greatly increase drying times.Do not use on surfaces to be immersed or on boats below water lines. Do not thin with water or mix with other typepaints. Do not use on unprimed galvanized metal surfaces. All floor and deck coatings are more slippery when thesurface is wet or contaminated with debris. Use caution.Safety Information:CAUTION! COMBUSTIBLE! CONTAINS PETROLEUM DISTILLATES: Keep away from heat and flame. To avoidbreathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during applicationand drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection(NIOSH/MSHA TC 23C or equivalent) or leave the area. Close container after each use. Avoid contact with skin. Ifswallowed, call a physican immediately. Never give anything by mouth to an unconscious person. Treatsymptomatically. NOTICE: Reports have associated repeated and prolonged occupational exposure to solvents withpermanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling thisproduct may be harmful or fatal.2/2/2012221XXProduct Specifications:Type: Oil Modified UrethaneExposure: Interior or ExteriorSpecular Gloss: 80@ 60° ± 5Volume Solids: 52.0 % ±2Solids by Weight: 68.0 % ±2Vehicle: 74.0 % ±2Pigment: 26.0 % ±2Dry Film Thickness: 2.1 milsViscosity @ 77 °F: 80KU ± 5Maximum VOC: 400 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsAvailable Colors and Bases:WhiteDeepMediumPastel16 StockNeutralAvailable Package Sizes:QuartGallon(Weight Per Gallon: 9.6 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 24 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Natural BristleRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ExteriorThis specially formulated 100% acrylic primer prepares most exterior surfaces for finish coats while helping toneutralize tannin and sugar bleed stains from woods, rust from nail heads and water soluble stains from concrete andmasonry. It provides maximum breathability, adhesion, mildew resistance and holdout to prolong the life of the finish.Recommended Use:Clapboards, shingles, shakes, trim, masonry, concrete, galvanized metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and dry. Sand and dust wood irregularities. Knots and sap streaks should be sealed with Wipe-Out 100% Acrylic Stain Block before priming. Joints, cracks, nail holes and other voids should be filled with <strong>California</strong>Caulking Compound. All mildewed areas should be scrubbed with an appropriate mildew eliminating cleaner. Hosedown with clean water and allow to dry before priming. Use rubber gloves and safety goggles for protection during thisprocess. Excessively chalky, salty or dusty surfaces should be scrubbed with fresh water, then hosed clean. Newconcrete should be fully cured (minimum of 30 days) before priming.Stir thoroughly before application. Material is supplied ready to use but can be thinned sparingly with water for properapplication consistency (up to 1/2 pint water per gallon).Do not brush out excessively but remove any sags or runs before material has started to dry. To hold back bleeding onheavily stained areas, a second coat of primer may be necessary.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Windows, Trim, Plywood:1 Coat Troubleshooter 100% Acrylic Latex Primer 45100 (or other 451XX color)1 or 2 coats <strong>California</strong>® Latex or Oil House Paint in desired finish▪ Concrete, Masonry, Non-Porous Block :1 Coat Troubleshooter 100% Acrylic Latex Primer 45100 (or other 451XX color)1 or 2 coats <strong>California</strong>® Latex or Oil House Paint in desired finishPrecautions:Do not mix with oils, solvents or other paints.Do not apply when air or surface temperature is below 50° F or when rain is eminent. Application overdamp surfaces increases the possibility of tannin or sugar stains bleeding through the primer. Troubleshooter Alkyd/Linseed Oil Wood Primer 21700 provides maximum protection against these stains.Do not use a finish coat or leave unprotected for long periods of time. The maximum period of time this primer can beexposed to the weather prior to topcoating is 60 days. Primers not topcoated within 60 days should be power-washedand reprimed prior to application of finish coats.Troubleshooter 100% Acrylic Latex Primer is resistant to the deteriorating action of mildew and bacteria.No claim is made for the preservative action to other than the paint film.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Product specification numbers are for 45100 (white)5/31/2012Troubleshooter® 100% Acrylic Latex Primer45100 (White)*, 45101 (Gray) & 45195 (Neutral Base)Product Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 7 @ 60° ± 2Volume Solids: 39.0 % ±2Solids by Weight: 51.7 % ±2Vehicle: 76.1 % ±2Pigment: 23.9 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 85KU ± 5Maximum VOC: 350 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteNeutralGrayAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.6 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 375-425 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ExteriorThis specially formulated 100% acrylic primer prepares most exterior surfaces for finish coats while helping toneutralize tannin and sugar bleed stains from woods, rust from nail heads and water soluble stains from concrete andmasonry. It provides maximum breathability, adhesion, mildew resistance and holdout to prolong the life of the finish.Recommended Use:Clapboards, shingles, shakes, trim, masonry, concrete, galvanized metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and dry. Sand and dust wood irregularities. Knots and sap streaks should be sealed with Wipe-Out 100% Acrylic Stain Block before priming. Joints, cracks, nail holes and other voids should be filled with <strong>California</strong>Caulking Compound. All mildewed areas should be scrubbed with an appropriate mildew eliminating cleaner. Hosedown with clean water and allow to dry before priming. Use rubber gloves and safety goggles for protection during thisprocess. Excessively chalky, salty or dusty surfaces should be scrubbed with fresh water, then hosed clean. Newconcrete should be fully cured (minimum of 30 days) before priming.Stir thoroughly before application. Material is supplied ready to use but can be thinned sparingly with water for properapplication consistency (up to 1/2 pint water per gallon).Do not brush out excessively but remove any sags or runs before material has started to dry. To hold back bleeding onheavily stained areas, a second coat of primer may be necessary.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Windows, Trim, Plywood:1 Coat Troubleshooter 100% Acrylic Latex Primer 45100 (or other 451XX color)1 or 2 coats <strong>California</strong>® Latex or Oil House Paint in desired finish▪ Concrete, Masonry, Non-Porous Block :1 Coat Troubleshooter 100% Acrylic Latex Primer 45100 (or other 451XX color)1 or 2 coats <strong>California</strong>® Latex or Oil House Paint in desired finishPrecautions:Do not mix with oils, solvents or other paints.Do not apply when air or surface temperature is below 50° F or when rain is eminent. Application overdamp surfaces increases the possibility of tannin or sugar stains bleeding through the primer. Troubleshooter Alkyd/Linseed Oil Wood Primer 21700 provides maximum protection against these stains.Do not use a finish coat or leave unprotected for long periods of time. The maximum period of time this primer can beexposed to the weather prior to topcoating is 60 days. Primers not topcoated within 60 days should be power-washedand reprimed prior to application of finish coats.Troubleshooter 100% Acrylic Latex Primer is resistant to the deteriorating action of mildew and bacteria.No claim is made for the preservative action to other than the paint film.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Product specification numbers are for 45100 (white)4/26/2012Troubleshooter® 100% Acrylic Latex Primer45100 (White)*, 45101 (Gray) & 45195 (Neutral Base)Product Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 7 @ 60° ± 2Volume Solids: 39.0 % ±2Solids by Weight: 51.7 % ±2Vehicle: 76.1 % ±2Pigment: 23.9 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 85KU ± 5Maximum VOC: 350 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteNeutralGrayAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.6 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 375-425 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ExteriorThis acrylic latex base coat has been formulated for use on new or unpainted wood, wood from which paint has beenremoved, bare concrete and masonry surfaces. This flexible breather type primer may be topcoated with mostconventional latex or alkyd-oil base house paints.Recommended Use:Clapboards, shingles, shakes, trim, shutters, concrete, masonry.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and free of surface contaminants. Remove all mildew by washing affected areas with anappropriate mildew eliminating cleaner followed by a hose down with clean water. For personal protection wear rubbergloves and safety goggles during this procedure.Cracks, nail holes and other voids should be filled with <strong>California</strong> Caulking Compound. Set all rested nails and fill allholes with the appropriate patching compound. If stains show through primer, stained area should be primed againafter the initial coat has completely dried and knots sealed.Wood Surfaces - On new wood surfaces spot prime knots and resin areas with Wipe-Out® , Wipe-Out Low Odor orWipe-Out 100% Acrylic Stain Block.Previously Painted Wood - Remove all loose or scaly paint by sanding or scraping so that all remaining paint is tightlyadhered. If more than half of the surface is bare, the entire surface should be primed before finishing.Concrete, Masonry, Block - The surface should be dry and clean. Powdery or chalky surfaces must be coated withStonite® Masonry Conditioner.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Trim:1 Coat Pacific Exterior Primer Latex 461001 or 2 coats Pacific Exterior Latex Flat, Low Luster or Satin Gloss▪ Previously Painted Wood:1 Coat Pacific Exterior Latex Primer 46100 (bare wood areas)1 or 2 coats Pacific Exterior Latex Flat, Low Luster or Satin GlossPrecautions:Do not paint when rain or dew is possible during drying and curing. Do not mix with other paints or solvents. Air andsurface temperature should be above 50° F during application and curing. Avoid application in direct sunlight. Themaximum period of time this primer can be exposed to the weather prior to topcoating is 60 days. Primers nottopcoated within 60 days should be power-washed and reprimed prior to application of finish coats.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Pacific® Latex Primer46100Product Specifications:Type: 100% Acrylic LatexExposure:ExteriorSpecular Gloss: 7 @ 60° ± 2Volume Solids: 28.8 % ±2Solids by Weight: 43.3 % ±2Vehicle: 75.7 % ±2Pigment: 24.3 % ±2Dry Film Thickness: 1.3 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 200 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorPrime Choice Universal Primer No. 50600 is a quick drying, high performance 100% acrylic latex stain blocking primerthat provides exceptional adhesion and stain blocking properties. This environmentally friendly product may be usedinterior or exterior to block most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossysurfaces.Recommended Use:For properly prepared wallboard, plaster, sheetrock, masonry, wood, concrete, galvanized metal, plastic laminates,vinyl wall coverings, under wallcoverings as well as previously painted surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be primed must be clean, dry, and free of grease, oil, wax, rust, loose paint, mildew or any surfacecontaminants. Wash glue size off plaster or other surfaces from which wallpaper has been removed.Do not apply over calcimine or other water soluble paints. Fill nicks, holes and voids with appropriate patchingmaterial, sand smooth and remove dust. New plaster and masonry surfaces must be fully cured before priming.Wash new plaster with clean water, rinsing rags or sponges frequently. Sanding is not required for properly andthoroughly cleaned hard or glossy surfaces, but abrasion of the surface will increase adhesion of this product. Do notsand plaster until after the surface is primed. Tape joints on sheetrock should be sanded smooth, with care beingexcercised not to abrade the surrounding paper backing. Wire brush rusted areas to remove loose rust. Plasticizersmust be thoroughly removed from vinyl wallcoverings with mineral spirits and a clean cloth that is changed frequently.Prime Choice Universal Primer hides well to seal many common stains such as crayon, graffiti, greasy spots, waterstains, rust, smoke stains, cedar and redwood bleed. Before priming stained areas, remove as much of the stain aspossible by washing, sanding or scraping. Some stains may require two coats. If an active stain discolors this primer,apply the finish coat to a small area to see if the stain is "locked" into the primer. If not, re-prime.5/31/2012Prime Choice Universal Primer50600Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 15@ 60° ± 5Volume Solids: 30.0 % ±2Solids by Weight: 43.8 % ±2Vehicle: 75.5 % ±2Pigment: 24.5 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 5 GallonArchitectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Masonry, Galvanized Metal Wood, Aluminum:1 coat Prime Choice Universal Primer 506001 or 2 coats any <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Low temperature, high humidity, or inadequateventilation will slow drying times. Application on hard non-porous surfaces requires a minimum of 2 hours dry timebefore recoating. Stearate containing clear finishes, shellacs and any clear finish that has been waxed, polished orhas surface soap residue can present adhesion problems for any coating. Apply a test area of primer over any clearfinish and test for adequate adhesion after one week of curing.Prime Choice Universal Primer is ready-to-use as it comes from the container, but can be thinned sparingly with waterif necessary. Product can be applied with a nylon or polyester brush, 3/8" nap synthetic roller or airless spray using.017 to .019 tip. Air and surface temperature should be 50ºF (10ºC) or higher during application and drying time.Keep from freezing. Difficult stains may require the use of Prime Choice 20700 Low Odor Oil Base Primer Sealer.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.(Weight Per Gallon: 10.4 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 175-225 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ExteriorThis unique exterior primer provides superior performance a base coat for all latex and oil base finishes. It isformulated for maximum breathability and resists tannin and sugar bleed staining from most exterior woods includingpressboard siding and rust stains from nail heads.Recommended Use:Clapboards, shingles, shakes, shutters, pressed board, trim.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD ISTOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Wood surfaces must be dry, clean and free of dust, dirt and other contaminants. Scrub all mildewed surfaces with asolution of equal parts household bleach and water. Hose down thoroughly with clean water and allow to dry. Wearrubber gloves and safety goggles for personal protection during this process. Seal all knots, resin deposits or gummyareas with Wipe-Out® 100% Acrylic Stain Block before priming. Fill all nail holes, joints and cracks with <strong>California</strong>Caulking Compound. Remove old paint, which is blistered, checked or cracked, back to bare wood. Spot prime allexposed wood. Prime ferrous metal surfaces with Everlive® Rust Inhibiting Metal Primerafter rust and mill scale are removed.Stir with a lifting motion to fully incorporate the pigments into the linseed oil. This product is of proper consistency aspackaged to be applied without thinning under normal environmental conditions. Clean tools and equipment as soonas possible with mineral spirits. Do not brush out excessively but remove any sags or runs before material has startedto dry. To hold back bleeding on heavily stained areas, a second coat of primer may be necessary but should not beapplied until initial coat has completely dried.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Windows, Trim, Plywood:1 coat Troubleshooter Fast Drying Exterior Wood Primer 22700 (or other 227XX color)1 or 2 coats <strong>California</strong> or Latex or Oil House Paint in desired finish4/26/2012Troubleshooter® Fast Drying Alkyd Primer22700 (White)**, 22745 (Gray) & 22746 (Russett)Product Specifications:Type: Alkyd Linseed OilExposure:ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 59.2 % ±2Solids by Weight: 78.5 % ±2Vehicle: 42.6 % ±2Pigment: 57.5 % ±2Dry Film Thickness: 2.5 milsViscosity @ 77 °F: 92KU ± 5Maximum VOC: 350 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsAvailable Colors and Bases:WhiteRussettGrayAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 12.2 lbs. ± .5 lb)*Note: Use Troubleshooter Fast Drying Alkyd Primer Neutral Base (22795) or deep base (22793) tinted to appropriatedark colors under darker colors.Precautions:Surfaces to which primer is to be applied must be dry to touch. Do not apply on damp, humid or foggy days, when rainis imminent or in late afternoon when there is a threat of moisture condensing on the paint film. In hot weather do notapply material in direct sunlight, but work on the shady side of the structure if possible. Air and surface temperatureshould be 45°F or higher during application and drying time. Low temperatures or high humidity will greatly lengthenthe normal drying time.Do not mix with other paints, special thinners or water. Do not leave unfinished for a long period of time. The maximumperiod of time this primer can be exposed to weather prior to topcoating is 60 days. Primers not topcoated within 60days should be power-washed and reprimed prior to application of finish coats. Troubleshooter Alkyd/Linseed OilWood Primer is resistant to the deteriorating action of mildew and bacteria. No claim is made for the preservativeaction to other than the paint film.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not take internally.Close container after each use.**Product specification numbers are for 22700 (white)Drying Times:To Touch: 4-6 hrs.To Handle: 6 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 325-400s.f./gal.Porous: 250-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon, Polyester,or Nat. BristleRoller -3/8" Nap Synthetic Fiber orNat. FiberAirless Spray -.011 to .013 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:ExteriorThis oil base primer provides even holdout for both latex and alkyd-oil finish coats. It will inhibit bleeding stains frombare woods and from discoloring the finish coat.Recommended Use:Clapboards, shingles, shakes, shutters, trimApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean and free of surface contaminants. Remove all mildew by washing affected areas with equalparts household bleach and water. Hose down thoroughly with clean water and allow to dry. Wear rubber gloves andsafety goggles for personal protection during this process. Fill all nail holes, voids and cracks with <strong>California</strong> CaulkingCompound. Set all rested nails and fill all holes with the appropriate patching compound. If stain shows through primer,stained area should be primed again after the initial coat has completely dried and knots sealed.Wood Surfaces - On new wood surfaces spot prime knots and resin areas with Wipe-Out® , Wipe-Out Low Odor orWipe-Out 100% Acrylic Stain Block.Previously Painted Wood - Remove all loose or scaly paint by sanding or scraping so that all remaining paint is tightlyadhered. If more than half of the surface is bare, the entire surface should be primed before finishing.Architectural Specifications:▪ New Wood, Clapboards, Shingles, Shakes, Windows, Trim, Plywood:1 coat Pacific Exterior Primer Alkyd 231001 or 2 coats Pacific Exterior Latex Flat, Low Luster or Satin Gloss▪ Previously Painted Wood:1 coat Pacific Exterior Primer Alkyd 23100 (bare wood areas)1 or 2 coats Pacific Exterior Latex Flat, Low Luster or Satin GlossPrecautions:Air and surface temperature should be 40 ° F or higher during application and curing time. Allow 48 hours drying timebetween coats to help assure adequate curing of film. Low temperatures or high humidity will greatly lengthen thenormal drying time. The maximum period of time this primer can be exposed to weather prior to topcoating is 60 days.Primers not topcoated within 60 days should be power-washed and reprimed prior to application of finish coats.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not takeinternally. Close container after each use.5/31/2012Pacific® Alkyd Primer23100Product Specifications:Type: Alkyd Linseed OilExposure:ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 56.2 % ±2Solids by Weight: 76.6 % ±2Vehicle: 43.8 % ±2Pigment: 56.2 % ±2Dry Film Thickness: 1.9 milsViscosity @ 77 °F: 93KU ± 6Maximum VOC: 350 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 12.0 lbs. ± .5 lb)Drying Times:To Touch: 16 hrs.To Handle: 20 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 450-500s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorEVERLIFE High Gloss Interior/Exterior Urethane Enamel is a rust inhibitive gloss enamel for use on metal substrates.This enamel dries quickly to a tough glossy finish, and applies easily with brush, roller or spray.Recommended Use:Cabinets, Metal Furniture, Decks, Equipment, Machinery, Tools, ToysApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contaminants.This product is best applied in multiple thin coats at relative humidity levels of 50% or lower in order to allow solvents toevaporate more effectively and aid in the drying process. Heavy coats tend to entrap solvents and can slow the dry timemarkedly. Each coat should be applied with a 16 to 24 hour time span between coats.Previously Painted Surfaces – Contaminants should be removed with a solution of detergent and water, rinsed withclean water and allowed to dry before finishing. Glossy surfaces should be dulled by sanding to ensure proper adhesionof finish coats. Worn or bare areas should be spot primed with an appropriate primer. Allow any primer to thoroughly drybefore top coating.Bare Ferrous Metal – Remove all dust or mill scale by wire brushing or sanding. Solvent clean greasy or oily surfaces.Prime all bare ferrous metals with EVERLIFE® Rust Inhibiting Metal Primer.Application: Stir thoroughly before using. This product is of proper consistency as packaged to be applied withoutthinning under normal environmental and application conditions. EVERLIFE can be tinted with <strong>California</strong> Trillion® orLogicolor® Colorants in amounts not to exceed manufacturer’s recommendations for the base being tinted. Apply withnatural bristle brush or short nap roller using long even strokes. EVERLIFE can also be applied by airless spray with a.012 tip. Multiple coats may be required for deep or ultra deep colors or when painting over a contrasting color. Clean allpainting equipment immediately with mineral spirits.Architectural Specifications:▪ Ferrous Metal - Unprimed:1 coat Everlife Rust-inhibiting oil-based metal primer #221501 or 2 coats <strong>California</strong> Everlife Urethane Enamel 221XXEverlife Urethane Enamel (For Metal Only)Precautions:Alkyd paints oxidize with age so light colors gradually turn yellow. In well lighted areas this yellowing is hardlynoticeable, but in shielded areas alkyd paints may yellow. Air and surface temperatures should be above 50°F or higherduring application and drying time. Insufficient ventilation, high humidity or dampness will greatly increase drying times.Do not use on surfaces to be immersed or on boats below water lines. Do not thin with water or mix with other typepaints. Do not use on unprimed galvanized metal surfaces. All floor and deck coatings are more slippery when thesurface is wet or contaminated with debris. Use caution.Safety Information:CAUTION! COMBUSTIBLE! CONTAINS PETROLEUM DISTILLATES: Keep away from heat and flame. To avoidbreathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during applicationand drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection(NIOSH/MSHA TC 23C or equivalent) or leave the area. Close container after each use. Avoid contact with skin. Ifswallowed, call a physican immediately. Never give anything by mouth to an unconscious person. Treatsymptomatically. NOTICE: Reports have associated repeated and prolonged occupational exposure to solvents withpermanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling thisproduct may be harmful or fatal.2/2/2012221XXProduct Specifications:Type: Oil Modified UrethaneExposure: Interior or ExteriorSpecular Gloss: 80@ 60° ± 5Volume Solids: 52.0 % ±2Solids by Weight: 68.0 % ±2Vehicle: 74.0 % ±2Pigment: 26.0 % ±2Dry Film Thickness: 2.1 milsViscosity @ 77 °F: 80KU ± 5Maximum VOC: 400 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsAvailable Colors and Bases:WhiteDeepMediumPastel16 StockNeutralAvailable Package Sizes:QuartGallon(Weight Per Gallon: 9.6 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 24 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Natural BristleRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorGrip Coat Bonding Primer is a water-based urethane modified acrylic primer-sealer with excellent adhesion to a widevariety of surfaces that usually present difficult adhesion problems. Although it is recommended that a test-patch beapplied before proceeding, since there is such a wide variety of surfaces, PVC, other plastics*, glass, fiberglass, glossypaints, galvanized metal, tile or glazed block surfaces can usually be successfully primed with this product. This productis suitable for interior or exterior exposures. It must be topcoated with latex, alkyd, urethane or waterborne epoxytopcoats.Recommended Use:Plaster, Sheetrock, Wallboard, Concrete, Masonry block, Wood, previously finished surfaces. Also PVC, other plastics*,glass, fiberglass, glossy paints, galvanized metal or glazed block.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.All surfaces should be dry, clean and free of dirt, dust and other contaminants which would interfere with the adhesion orappearance of this primer.Clean the surface by power washing or washing with strong detergent followed by clean water rinse. Remove heavygrease or oil contaminants with solvent such as xylol or lacquer thinner. Reduce gloss by sanding and remove sandingdust. Mildew and mold spores should be removed using bleach solution followed by a clean water rinse.DATA/SPECIFICATIONS 95/9/2011GRIP COAT Bonding Primer50500Product Specifications:Type: Ureth. Modified AcrylicExposure: Interior or ExteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 37.4%±2Solids by Weight: 52.0 % ±2Vehicle: 68.2 % ±2Pigment: 31.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 86KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteGrip Coat Bonding Primer is ready-to-use as it comes from the container, but can be thinned sparingly with water ifnecessary. Grip Coat Bonding Primer can be applied with a nylon or polyester brush, 3/8" nap roller or airless sprayusing a .017 to .019 tip. Air and surface temperatures should be 50ºF (10ºC) or higher during application and dryingtime.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Concrete, Non-Porous Masonry:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane,Tile-Cote® Polyamide Epoxy 1200 Series Finish▪ Wood:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane Finish▪ PVC, other plastics*, glass, fiberglass, glossy paints, galvanized metal, tile or glazed block:1 coat Grip Coat Bonding Primer 505001 or 2 coats <strong>California</strong> Latex, Alkyd, Oil-Modified Polyurethane FinishPrecautions:Do not paint on hot surfaces or in direct sun. Do not apply sooner than 4 hours before heavy dew or rain are expectedand be sure there will be at least 24 hours free of rain or high humidity after product application. Ideally, this productshould not be used in bathrooms, pool areas, below grade applications or where continuous water contact occurs.Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Not recommended for use over polypropylene or polyethylene.Available Package Sizes:QuartGallon(Weight Per Gallon: 10.9 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 6 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 200-275 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorThis non-toxic, 100% acrylic waterborne enamel provides a fast dry gloss finish for many general maintenancerequirements. It provides superior color retention and moisture resistance when used exterior and is rust inhibiting whenapplied in the proper system.Recommended Use:Concrete, wood, wallboard, masonry block, plaster, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. Thiscoating is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Everlife Rust-inhibiting Latex primerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of a masonry block filler if a denser surface is desired.Previously Painted Surfaces - Wash, sand or dust to obtain a paintable surface.Glossy Surfaces - Dull by sanding to insure proper adhesion of paint.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Non-Porous Masonry:1 Coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XXor2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Porous Masonry and Block:1 coat of a masonry block filler1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Ferrous Metal - Unprimed:1 coat Everlife Latex Primer (#52161 white, or #52167 red)1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Ferrous Metal - Primed - Galvanized Metal:1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Do not use in place of House Paint. Remove allmildew before application. For maximum rust inhibiting requirements prime bare ferrous metal with <strong>California</strong> HighPerformance Industrial Prime-Line Metal Primer.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 96/8/2011Everlife 100% Acrylic High GlossWaterborne Enamel 521XXProduct Specifications:Type: 100% Acrylic WaterborneExposure: Interior or ExteriorSpecular Gloss: 80 @ 60° ± 5Volume Solids: 34.2%±2Solids by Weight: 48.5 % ±2Vehicle: 75.6 % ±2Pigment: 22.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 85KU ± 5Maximum VOC: 250 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:White PastelDeep Neutral15 Stock MediumAvailable Package Sizes:QuartGallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 16 hrs.To Recoat: 3 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-425s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorWipe-Out 100% Acrylic Latex Stain Block 52500 is a quick drying, high performance 100% acrylic latex stain blockingprimer that provides exceptional adhesion and stain blocking properties. This environmentally friendly product may beused interior or exterior to block most bleeding type stains, seal porous surfaces and provide adhesion to hard andglossy surfaces.Recommended Use:Wallboard, Plaster, Sheetrock, Concrete, Masonry, Wood, Aluminum, Galvanized Metal, Plastic Laminates, Vinyl WallCoverings, Previously Painted SurfacesApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be primed must be clean, dry, and free of grease, oil, wax, rust, loose paint, mildew or any surfacecontaminants. Wash glue size off plaster or other surfaces from which wallpaper has been removed.Do not apply over calcimine, casein or other water soluble paints. Fill nicks, holes and voids with appropriate patchingmaterial, sand smooth and remove dust.New plaster and masonry surfaces must be fully cured before priming.Sanding is not required for properly and thoroughly cleaned hard or glossy surfaces, but abrasion of the surface willincrease adhesion of this product.Do not sand plaster until after the surface is primed.Tape joints on sheetrock should be sanded smooth, with care being exercised not to abrade the surrounding paperbacking.Stains: Wipe-Out 100% Acrylic Stain Block hides well to seal many common stains such as crayon,graffiti, greasy spots, water stains, rust, smoke stains, cedar and redwood bleed. Before priming stainedareas, remove as much of the stain as possible by washing, sanding or scraping. Some stains may requiretwo coats. If an active stain discolors this primer, apply the finish coat to a small area to see if the stain is“locked” into the primer. If not, re-prime.Plasticizers must be thoroughly removed from vinyl wall coverings with mineral spirits, proper ventilation and a cleancloth that is changed frequently.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Masonry, Galvanized Metal Wood, Aluminum:1 coat Wipe-Out 100% Acrylic Stain Block 525001 or 2 coats any <strong>California</strong>® Latex, Alkyd or Urethane in desired finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Difficult stains may require the use of Wipe-Out® orWipe-Out Low Odor® Stain Block.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 95/20/2011Wipe-Out® 100% Acrylic Latex Stain Block52500Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 15 @ 60° ± 5Volume Solids: 33.4%±2Solids by Weight: 46.9 % ±2Vehicle: 76.1 % ±2Pigment: 23.9 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 95KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 200-250 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Interior or ExteriorProduct Description:Stopz® Mold & Mildew Eliminator All Purpose Primer is an extremely durable acrylic coating, developed to withstandmoist and humid conditions that provide the ideal environment for mildew or fungal growth. This easy to apply coatingoffers the ultimate in durability in combination with the excellent characteristics of the prevention of fungus growth on theprimer itself.Recommended Use:Stopz Mold & Mildew Eliminator is designed to stop residual mold and mildew that may grow on the primer afterprecleaning contaminated surfaces, as well as to inhibit the future growth and spread of mold and mildew on the curedfilm surface in residential & institutional buildings. Stopz Mold & Mildew Eliminator is recommended for use on interiorwall surfaces such as plaster, wallboard, Sheetrock®, concrete, masonry block, wood, primed metal and galvanizedmetal. Stopz Mold & Mildew Eliminator is also recommended for use on interior or exterior wood framing, primed metal,concrete, and wallboard inside the wall cavity. Do not use for HVAC system application.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Stopz Mold & Mildew Eliminator is supplied ready to use. Stir thoroughly. Do not mix with any other coatings, solvents orcolors in oil. Remove damaged materials and clean surfaces. Patch surface irregularities with an appropriate patchingcompound. Do not apply when air or surface temperature is below 50º F or when drying conditions are poor. Keep fromfreezing. Use adequate ventilation during application.DATA/SPECIFICATIONS 96/9/2011Stopz® Mold & Mildew Eliminator* All Purpose Primer58300Product Specifications:Type:100% AcrylicExposure: Interior or ExteriorSpecular Gloss: 50 @ 60° ± 0Volume Solids: 32.8%±2Solids by Weight: 42.1 % ±2Vehicle: 85.5 % ±2Pigment: 14.5 % ±2Dry Film Thickness: 1.7 milsViscosity @ 77 °F: 98KU ± 5Maximum VOC: 200 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteRemove gross filth or heavy soil. For heavily soiled areas, a pre-cleaning step is required. Surfaces should bethoroughly scrubbed with a solution of detergent and household bleach (sodium hypocholorite). Apply Stopz Mold &Mildew Eliminator generously and uniformly by brush or airless spray and ensure that the surface is completely coated.Allow to air dry. Clean and inspect regularly for damage to coating film- reapply if cured coating film becomes damaged.Stopz Mold & Mildew Eliminator will kill all existing visible mold and mildew on the wall surface, and then will prevent thegrowth of mold and mildew on the surface of the cured film.Clean tools and drippings with warm soapy water before Stopz Mold& Mildew Eliminator dries.Architectural Specifications:▪Interior walls or wood trim subject to moist conditions, steam, or high humidity conditions (such as kitchens, baths, or abelow grade basement)OPTION 1: 2 coats Stopz Mold & Mildew Eliminator No. 58300 (Product can also be used as a finishcoat)OPTION 2: 1 or 2 coats Stopz Mold & Mildew Eliminator No. 58300 (use 2 coats for severe conditions), 1 or 2 coats<strong>California</strong>® Kitchen and Bath 100% Acrylic Latex with Microban Interior Finish: 512XX (Eggshell) or 513XX(Semigloss)OPTION 3: 1 or 2 coats Stopz Mold & Mildew Eliminator No. 58300 (use 2 coats for severe conditions), 1 or 2 coats<strong>California</strong> 2010, 100% Acrylic Super Scrub® Ceramic with Microban Interior Finish: 551XX (Eggshell), 552XX (Semigloss)or 553XX (Matte).Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:FIRST AID: Have the product label or MSDS with you when calling a poison control center or doctor, or going fortreatment. See product specification for details. FOR MEDICAL ASSISTANCE, CALL YOUR LOCAL POISONCONTROL CENTER. PRECAUTIONARY STATEMENTS: HAZARDS TO HUMANS. CAUTION. KEEP OUT OF REACHOF CHILDREN. Do not take internally. Close container after each use. Harmful if swallowed or inhaled. Avoid breathingspray mist. Avoid contact with skin, eyes, or clothing. Wash thorughly with soap and water after handling. Removecontaminated clothing and wash clothing before reuse. When applying with a sprayer, applicator should wear a filteringrespirator (MSHA/NIOSH approved). PHYSICAL AND CHEMICAL HAZARDS: Do not apply this product in or onelectrical equipment due to the possibility of shock hazard.Available Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 9.7 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 4 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 300-350s.f./gal.Porous: 175-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:*Only claim is that this primer contains biocides which will eliminate the growth of mold & mildew on the paint film itself<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:InteriorUltraplate waterborne enamel is a satin finish acrylic urethane enamel with outstanding hide, leveling & adhesion.Recommended Use:This product was developed to provide a factory like finish when restoring old cabinets, shelving, furniture or many otherinterior surfaces where a smooth & tough coating is desired. Ultraplate’s remarkable adhesive properties make it anexcellent choice for those hard-to-stick to surfaces without need for priming.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Clean up carefully with a HEPA vacuum and wet mop. Before you start, find out how to protect yourselfand your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/leadSurface to be painted must be free of dust, mildew, dirt, grease, wax, loose paint or any other contaminant that mayinhibit good adhesion. Lightly sand hard or glossy surfaces after cleaning & before applying Ultraplate.Ultraplate is ready-to-use as it comes from the can. It may be thinned sparingly with water and may be tinted with up to 2oz. of <strong>California</strong> <strong>Paints</strong>’ Logicolor® or Trillion® colorant. Ultraplate may be applied by a quality synthetic brush, 3/8” orless nap roller, or by spray using HVLP or airless .019-.021 tip. Multiple thin coats are preferred rather than one heavycoat. Check color for accuracy before applying.Architectural Specifications:• Previously painted surfaces; 1 or 2 coats Ultraplate• Bare Wood; No primer necessary, 1 or 2 coats Ultraplate• Plaster, Wallboard, Sheetrock; No primer necessary, 1 or 2 coats Ultraplate• Ferrous Metal; 1 coat Rust Stop® rust inhibiting metal primer, 1 or 2 coats Ultraplate• Concrete; No primer necessary, 1 or 2 coats Ultraplate• Porous concrete, block; 1 coat Mason Cote® block filler, 1 or 2 coats UltraplatePrecautions:Do not add solvents, oils,or mix with other paints. Do not apply when air and surface te,peratures are below 50° F orwhen drying conditions are poor Keep from freezing. Use adequate ventilation.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 94/28/2011ULTRAPLATE Waterborne Enamel52900Product Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 40 @ 60° ±2Volume Solids: 33.2% ±2Solids by Weight: 45.6 % ±2Vehicle: 78.4 % ±2Pigment: 21.6 % ±2Dry Film Thickness: 1.4 milsViscosity @ 77 °F: 05 KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:White PastelAvailable Package Sizes:QuartGallon(Weight Per Gallon: 10.23lbs. ± .5 lb)Drying Times:To Touch: 1/2 hrs.To Handle: 2 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> Products Corporation ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.calprocorp.com ▪ 800-225-1141
Product Description:Interior or ExteriorEVERLIFE High Gloss Interior/Exterior Urethane Enamel is a rust inhibitive gloss enamel for use on metal substrates.This enamel dries quickly to a tough glossy finish, and applies easily with brush, roller or spray.Recommended Use:Cabinets, Metal Furniture, Decks, Equipment, Machinery, Tools, ToysApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contaminants.This product is best applied in multiple thin coats at relative humidity levels of 50% or lower in order to allow solvents toevaporate more effectively and aid in the drying process. Heavy coats tend to entrap solvents and can slow the dry timemarkedly. Each coat should be applied with a 16 to 24 hour time span between coats.Previously Painted Surfaces – Contaminants should be removed with a solution of detergent and water, rinsed withclean water and allowed to dry before finishing. Glossy surfaces should be dulled by sanding to ensure proper adhesionof finish coats. Worn or bare areas should be spot primed with an appropriate primer. Allow any primer to thoroughly drybefore top coating.Bare Ferrous Metal – Remove all dust or mill scale by wire brushing or sanding. Solvent clean greasy or oily surfaces.Prime all bare ferrous metals with EVERLIFE® Rust Inhibiting Metal Primer.Application: Stir thoroughly before using. This product is of proper consistency as packaged to be applied withoutthinning under normal environmental and application conditions. EVERLIFE can be tinted with <strong>California</strong> Trillion® orLogicolor® Colorants in amounts not to exceed manufacturer’s recommendations for the base being tinted. Apply withnatural bristle brush or short nap roller using long even strokes. EVERLIFE can also be applied by airless spray with a.012 tip. Multiple coats may be required for deep or ultra deep colors or when painting over a contrasting color. Clean allpainting equipment immediately with mineral spirits.Architectural Specifications:▪ Ferrous Metal - Unprimed:1 coat Everlife Rust-inhibiting oil-based metal primer #221501 or 2 coats <strong>California</strong> Everlife Urethane Enamel 221XXEverlife Urethane Enamel (For Metal Only)Precautions:Alkyd paints oxidize with age so light colors gradually turn yellow. In well lighted areas this yellowing is hardlynoticeable, but in shielded areas alkyd paints may yellow. Air and surface temperatures should be above 50°F or higherduring application and drying time. Insufficient ventilation, high humidity or dampness will greatly increase drying times.Do not use on surfaces to be immersed or on boats below water lines. Do not thin with water or mix with other typepaints. Do not use on unprimed galvanized metal surfaces. All floor and deck coatings are more slippery when thesurface is wet or contaminated with debris. Use caution.Safety Information:CAUTION! COMBUSTIBLE! CONTAINS PETROLEUM DISTILLATES: Keep away from heat and flame. To avoidbreathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during applicationand drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection(NIOSH/MSHA TC 23C or equivalent) or leave the area. Close container after each use. Avoid contact with skin. Ifswallowed, call a physican immediately. Never give anything by mouth to an unconscious person. Treatsymptomatically. NOTICE: Reports have associated repeated and prolonged occupational exposure to solvents withpermanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling thisproduct may be harmful or fatal.2/2/2012221XXProduct Specifications:Type: Oil Modified UrethaneExposure: Interior or ExteriorSpecular Gloss: 80@ 60° ± 5Volume Solids: 52.0 % ±2Solids by Weight: 68.0 % ±2Vehicle: 74.0 % ±2Pigment: 26.0 % ±2Dry Film Thickness: 2.1 milsViscosity @ 77 °F: 80KU ± 5Maximum VOC: 400 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsAvailable Colors and Bases:WhiteDeepMediumPastel16 StockNeutralAvailable Package Sizes:QuartGallon(Weight Per Gallon: 9.6 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 24 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Natural BristleRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:This durable, easily applied acrylic enamel is fortified with emulsified epoxy to provide maximum performance in a lowgloss, water-based floor and trim finish. It incorporates color retention, breathability, alkali, water and blister resistanceand adhesion into it’s acrylic formulation. This is an economical yet durable environmentally friendly floor enamel.Recommended Use:Floors, patios, porches, steps, decks, playrooms, basements, wood, concrete and masonry.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surface Preparation: Surfaces must be thoroughly cleaned of all dirt and dust. Dirty surfaces should be washed with astrong detergent solution, rinsed with clean water and allowed to dry overnight. Grease, oils and wax be removed bysolvent cleaning to insure proper adhesion of the finish paint. All old, loose, scaly or flaking paint must be removedback to a sound substrate before any repainting is attempted. New concrete should be allowed to cure a minimum of30 days before applying any finish. Steel trowelled, hard or glassy smooth concrete should be mechanically abraded toobtain proper adhesion. Curing agents or concrete hardeners can prevent adhesion of any coating unless the surfaceis mechanically abraded. Under normal conditions acid etching is not recommended but new dusty or chalky concreteshould have a coat of Stonite Masonry Conditioner applied before Wear-All is used as a finish.Wear-All is self-priming over unfinished wood and does not require a wood primer.Application: Material is supplied ready to use but can be thinned up to one pint per gallon with water for first coat onnew surfaces or for spot -priming bare areas on old finishes. Finish coat should be applied full body.Architectural Specifications:▪ Wood, Floors:2 coats <strong>California</strong> Wear-All Multi-Purpose Acrylic Latex Enamel 528XX▪ Concrete, Patios, Breezeways, Steps:1 coat Stonite® Masonry Conditioner 7010 as necessary1 or 2 coats <strong>California</strong> Wear-All Multi-Purpose Acrylic Latex Enamel 528XX(thin first coat 10-20% with water)▪ Dados, Walls:2 coats <strong>California</strong> Wear-All Multi-Purpose Acrylic Latex Enamel 528XX▪ Repaint:1 coat <strong>California</strong> Wear-All Multi-Purpose Acrylic Latex Enamel 528XXNote: Wear-All Muti-Purpose Acrylic Latex Enamel can be patched and traffic areas relocated with less difficulty thanany other floor finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do notapply when air or surface temperature is below 50° F or when drying conditions are poor. Keep fromfreezing. Use adequate ventilation.Do not use on garage floors. Hot tires or the weight of a vehicle can cause loss of adhesion.Do not apply over water, glass or other silicate concrete hardeners.Not recommended on areas utilizing heavy duty lift trucks. Tuf-Quik® Urethane Enamel is a better finishfor these areas.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 9R0016Wear-All® Multi-Purpose Acrylic Latex Enamel528XXProduct Specifications:Type: 100% Acrylic LatexExposure:InteriorSpecular Gloss: 18@ 60° ± 4Volume Solids: 32.1 % ±2Solids by Weight: 45.7 % ±2Vehicle: 75.3 % ±2Pigment: 24.7 % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: 95 KU ±5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:White 8 StockPastel MediumDeepAvailable Package Sizes:Gallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 16 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:INDUSTRIALThis durable multi-purpose alkyd gloss enamel is formulated to protect a variety of interior or exterior surfaces. Itprovides an economical finish for most surfaces in offices, institutions and other commercial applications, industrialmetal structures and structural components. WEAR-ALL Multi-Purpose Alkyd High Gloss Enamel is suitable forfrequent repeated heavy abrasion, including mechanical wear and repeated frequent scrubbing with certain industrialsolvents, cleansers or scouring agents. This all-purpose industrial enamel will withstand repeated detergent washingswithout injury to the paint and can be readily recoated when necessary.Recommended Use:Machinery, Landings, Industrial Flooring, Handrails, Steps, Racks, Shelving, ToolsApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap and othersurface contamination. On new wood or concrete surfaces WearAll Alkyd High Gloss Enamel is self-priming. Apply asthinly as possible using a multi-coat system on new surfaces.Ferrous Metal - Clean, then prime with Larcoloid® Rust Inhibiting Metal Primer.Wood - New wood should be clean, dry and sanded if necessary.Previously Painted Surfaces - Wash, sand or dust and remove any loose paint to obtain a paintable surface.Glossy Surfaces - Dull by sanding to insure proper adhesion of paint.Concrete - Porous or dusty concrete must be sealed with Stonite® Masonry Conditioner. New concrete must cure aminimum of 30 days and have a moisture content below 15%. Steel troweled smooth concrete with hardeners or curingmembranes may require abrasion to obtain proper adhesion.Architectural Specifications:▪ Wood:2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XX▪ Concrete, Non-Porous Masonry:2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XXPrecautions:Do not add water, oils or mix with other paint types. Do not apply when air or surface temperature is below 50° F orwhen drying conditions are poor. Do not apply to concrete below ground or directly on moist ground without thoroughlyetching. Inadequate ventilation, high humidity, low temperatures or thick applications will greatly retard drying time.All coated walking surfaces become slippery when the surface is wet or contaminated. To reduce the possibility ofslipping, skidding or falling add one pint of #1000 Slip Resistant Additive or #2 Pumice per gallon of enamel beforeapplication. To maintain the best possible skid resistance, coated areas must be kept dry and properly cleaned of dirt,oils, food and beverage residue and any other contaminants.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not take internally.Close container after each use.Keep away from heat and flame. To avoid breathing vapors or spray mist, open windows and doors or use other meansto ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness,increase fresh air or wear respiratory protection (NIOSH/MSHA TC 23C or equivalent) or leave the area. Closecontainer after each use. Avoid contact with skin. If this product is swallowed, call a physician immediately. Never giveanything by mouth to an unconscious person. Treat symptomatically.NOTICE: Reports have associated repeated and prolonged occupational exposure to solvents with permanent brainand nervous system damage. Intentional misuse by deliberately concentrating and inhaling this product may be harmfulor fatal.DATA/SPECIFICATIONS 9R0016Wear-All® Multipurpose Alkyd High Gloss Enamel242XXProduct Specifications:Type:AlkydExposure: Interior or ExteriorSpecular Gloss: 70@ 60° ± 5Volume Solids: 45.5 % ±2Solids by Weight: 63.3 % ±2Vehicle: 71.6 % ±2Pigment: 28.4 % ±2Dry Film Thickness: 2 milsViscosity @ 77 °F: 85 KU ±5Maximum VOC: 340 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean Up: Mineral SpiritsAvailable Colors and Bases:White 8 StockPastel MediumDeep NeutralAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 9.6 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 16 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -Short Nap Synthetic orNatural FiberAirless Spray -0.011 to 0.013 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorThis non-toxic, 100% acrylic waterborne enamel provides a fast dry gloss finish for many general maintenancerequirements. It provides superior color retention and moisture resistance when used exterior and is rust inhibiting whenapplied in the proper system.Recommended Use:Concrete, wood, wallboard, masonry block, plaster, primed metal.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces to be painted must be free of dust, mildew, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap, andother surface contamination. Patch irregularities with vinyl patching paste or an appropriate patching compound. Thiscoating is self-priming over bare sheetrock, composition board, ceiling tile and concrete.New Plaster - Knife off all nibs and protrusions. Wipe with a clean damp cloth to remove loose particles. Do not sandnew plaster until it is primed.Wallboard, Sheetrock, Gypsum Board - Joint compound should be sanded smooth, but avoid abrading the paper.Ferrous Metal - Clean, then prime with Everlife Rust-inhibiting Latex primerWood - Seal knots and stains with Prime Choice Low Odor Oil Base Primer Sealer or Prime Choice 100% AcrylicUniversal PrimerMasonry Block - Apply one coat of a masonry block filler if a denser surface is desired.Previously Painted Surfaces - Wash, sand or dust to obtain a paintable surface.Glossy Surfaces - Dull by sanding to insure proper adhesion of paint.Architectural Specifications:▪ Plaster, Wallboard, Sheetrock, Concrete, Non-Porous Masonry:1 Coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XXor2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Porous Masonry and Block:1 coat of a masonry block filler1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Ferrous Metal - Unprimed:1 coat Everlife Latex Primer (#52161 white, or #52167 red)1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Ferrous Metal - Primed - Galvanized Metal:1 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XX▪ Wood:1 coat Prime Choice All Surface Acrylic Primer 503001 or 2 coats Everlife 100% Acrylic High Gloss Waterborne Enamel No. 521XXPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Do not use in place of House Paint. Remove allmildew before application. For maximum rust inhibiting requirements prime bare ferrous metal with <strong>California</strong> HighPerformance Industrial Prime-Line Metal Primer.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 96/8/2011Everlife 100% Acrylic High GlossWaterborne Enamel 521XXProduct Specifications:Type: 100% Acrylic WaterborneExposure: Interior or ExteriorSpecular Gloss: 80 @ 60° ± 5Volume Solids: 34.2%±2Solids by Weight: 48.5 % ±2Vehicle: 75.6 % ±2Pigment: 22.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 85KU ± 5Maximum VOC: 250 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:White PastelDeep Neutral15 Stock MediumAvailable Package Sizes:QuartGallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 16 hrs.To Recoat: 3 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-425s.f./gal.Porous: 300-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorThis durable, easily applied acrylic enamel is fortified with emulsified epoxy to provide maximum performance in a lowgloss, water-based floor and trim finish. It incorporates maximum color retention, breathability, alkali, water and blisterresistance and adhesion into it’s unique formulation. This is truly the standard for environmentally friendly floor enamels.Recommended Use:Floors, patios, porches, steps, decks, playrooms, basements, wood, concrete and masonry.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be thoroughly cleaned of all dirt and dust. Dirty surfaces should be washed with a strong detergentsolution, rinsed with clean water and allowed to dry overnight. Grease, oils and wax be removed by solvent cleaning toinsure proper adhesion of the finish paint. All old, loose, scaly or flaking paint must be removed back to a soundsubstrate before any repainting is attempted.New concrete should be allowed to cure a minimum of 30 days before applying any finish. Steel trowelled, hard orglassy smooth concrete should be mechanically abraded to obtain proper adhesion. Curing agents or concretehardeners can prevent adhesion of any coating unless the surface is mechanically abraded. Under normal conditionsacid etching is not recommended but new dusty or chalky concrete should have a coat of Stonite Masonry Conditionerapplied before AllFlor is used as a finish. AllFlor is self-priming over unfinished wood and does not require a woodprimer.DATA/SPECIFICATIONS 95/20/2011AllFlor® Epoxy Fortified Acrylic Floor Enamel530XXProduct Specifications:Type: Acrylic Latex/Epoxy*Exposure: Interior or ExteriorSpecular Gloss: 30 @ 60° ± 5Volume Solids: 35.0%±2Solids by Weight: 48.1 % ±2Vehicle: 76.2 % ±2Pigment: 23.8 % ±2Dry Film Thickness: 1.3 milsViscosity @ 77 °F: 85KU ± 5Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterAvailable Colors and Bases:White 9 StockPastel MediumDeepMaterial is supplied ready to use but can be thinned up to one pint per gallon with waterfor first coat on new surfaces or for spot -priming bare areas on old finishes. Finish coat should be applied full body.Architectural Specifications:▪ Wood, Floors:2 coats <strong>California</strong> AllFlor 530XX▪ Concrete, Patios, Breezeways, Steps:1 coat Stonite® Waterborne Acrylic Masonry Primer 7007 as necessary1 or 2 coats <strong>California</strong> AllFlor 530XX (thin first coat 10-20% with water)▪ Dados, Walls:2 coats <strong>California</strong> AllFlor 530XX▪ Repaint:1 coat <strong>California</strong> AllFlor 530XXNote: AllFlor can be patched and traffic areas relocated with less difficulty than any other floor finish.Precautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation. Do not use on garagefloors. Hot tires or the weight of a vehicle can cause loss of adhesion. Do not apply over water, glass or other silicateconcrete hardeners. Not recommended on areas utilizing heavy duty lift trucks. Tuf-Quik® Urethane Enamel is a betterfinish for these areas.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.*Specifications based on 53091 Pastel BaseAvailable Package Sizes:QuartGallon(Weight Per Gallon: 10.5 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 16 hrs.To Recoat: 4 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-450s.f./gal.Porous: 350-400 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorWEATHERPLATE CLEAR WATERPROOFING SEALER is a transparent sealer that penetrates the surface of dry,porous materials to help prevent moisture penetration and water damage. This can be used on wood, concrete, brick,masonry, canvas, stucco and other substrates. WEATHERPLATE dries clear and allows the surface to age naturally.This product will protect against salt water. For new construction, prevent weathering and water damage by applyingWEATHERPLATE CLEAR WATERPROOFING SEALER immediately after installation.Recommended Use:Uncoated wood, concrete, brick, masonry, canvas, stucco and other porous substrates.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be thoroughly dry to allow for penetration. Surfaces must be clean and free from all other coatings thatmay prevent penetration. Always test a small area before application for desired results before coating the entire surface.Apply at temperatures above 50° F using a suitable brush, roller, pad applicator or flooding spray. Use sufficient materialto saturate the surface. Do not apply a second coat over a dry first coat. It is acceptable to apply a second coat via a weton wet method.Architectural Specifications:On wood, concrete, brick, masonry, canvas, stucco and other substrates;Use one or two coats WEATHERPLATE CLEAR WATERPROOFING SEALER applied full body.Precautions:For porous surfaces only. Do not use on glazed brick, terrazzo, rubber, plastic or asphalt. Do not apply paint overWEATHERPLATE CLEAR WATERPROOFING SEALER. Do not use as an additive to paints.Safety Information:Keep out of reach of children. Do not take internally.DATA/SPECIFICATIONS 97/19/2011Weatherplate Clear Waterproofing Sealer58000Product Specifications:Type: Acrylic/CarboxylateExposure: Interior or ExteriorSpecular Gloss:Volume Solids:N/A13.0% ±2Solids by Weight: 14.0 % ±2Vehicle: 100 % ±2Pigment: 0% ±2Dry Film Thickness:
Product Description:Interior or ExteriorStopz® is a mold and mildew resistant waterproofing paint designed to waterproof bare masonry and hold back up to 10lbs of hydrostatic pressure. This product will work either above ground or below grade. Stopz is an acrylic low odor fastdrying formula that works by penetrating the concrete and expanding deeply into the pores of the masonry to waterproofand reduce radon emissions. Stopz contains an EPA registered mold and mildew eliminating* additive and is easilyapplied with a brush and/or roller.Recommended Use:All unpainted interior and exterior masonry surfaces such as; concrete, brick, block, stucco, etc. (not recommended forfloors).Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.DATA/SPECIFICATIONS 97/25/2011Stopz® Mildew Eliminating* Masonry Waterproofer58350Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss:Volume Solids:6 @ 60° ±141.7% ±2Solids by Weight: 57.8 % ±2Vehicle: 60.4 % ±2Pigment: 40.0 % ±2Dry Film Thickness: 5-9 milsViscosity @ 77 °F: 130 KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean Up: Soap & WaterThe first coat of Stopz is best applied with a stiff short bristled, synthetic brush so that the paint can be worked into themasonry. Subsequent coats may be applied by either brush or 3/4” or longer nap roller. Heavy application is the mosteffective way to waterproof masonry.All surfaces must be free from paint, dirt, grease, oil, mildew, efflorescence, chalk, etc. Very smooth masonry should besand blasted or abraded in such a fashion as to open the pores of the masonry enough to allow penetration of thewaterproofer.Architectural Specifications:Porous masonry, brick, block, concrete etc:2 coats Stopz Waterproofing PaintPrecautions:Do not add solvents or mix with other types of paint or chemicals. Apply at temperatures above 50 degrees F. Keep fromfreezing. Test for compatibility before using finish coats other than latex.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Notes:*Biocides included are for preservation of the coating film only.** Smooth concrete should have some porosity for the effective application of StopZ.***Spray application is not recommended.Available Colors and Bases:WhiteAvailable Package Sizes:Gallon 5 Gallon(Weight Per Gallon: 11.5 lbs. ± .5 lb)Drying Times:To Touch: 1-2 hrs.To Handle: 3 hrs.To Recoat: 3 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: **100-125s.f./gal.Porous: 75-100 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/4" Nap Synthetic FiberAirless Spray -Not recommended<strong>California</strong> Products Corporation ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.calprocorp.com ▪ 800-225-1141
Product Description:Interior or ExteriorSkid-Grip is a 100% acrylic-textured pavement coating for use over asphalt or concrete surfaces, anywhere anextremely durable, skid resistant finish is desired.Recommended Use:Patios, Pool Decks, Tennis Courts, Basketball Courts, Driveways, Steps, Walkways, RampsApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to controllead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourselfand your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.New asphalt and new concrete surfaces must cure for at least 28 days prior to applying SKID-GRIP. The surface to becoated should be well drained, free of cracks, clean and free of all loose dirt, debris, grease and oil.SKID-GRIP may be applied by brush, ¾ inch roller or squeegee. Stir contents thoroughly to insure even dispersion. Themost effective method is to pour a 3-5 inch ribbon of SKID-GRIP, sufficient to cover the surface to be coated, then eitherbrush, roll or squeegee over the entire surface.Architectural Specifications:2 coats Skid-Grip on properly prepared ashphalt, concrete or wood.Precautions:Do not apply when air and surface temperature are below 50°F (10° C). Do not apply when rain is imminent. Do notapply when surface is above 140°F (60° C). Do not apply over tar emulsions less than 4 years old.Do not allow traffic over surface for at least 24 hours (or 48 hours in humid conditions). *Pool Decks must be clean anddry. Do not use 24 hours and/or after application.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.DATA/SPECIFICATIONS 94/25/2011Skid-Grip® 100% Acrylic Anti-Slip Surface Coating65XXProduct Specifications:Type:Acrylic LatexExposure: Interior or ExteriorSpecular Gloss:
Product Description:INDUSTRIALInterior or ExteriorA tough chemical resistant coating that produces maximum protection against common corrosive chemicals, moisture,abrasion and atmospheric contamination. Creates a durable ceramic tile-like finish on masonry, plaster, sheetrock andother substrates subjected to heavy abrasion and atmospheric contamination. Protects against the deterioratingeffects of mild acids, alkalis, grease, oil, gasoline and water. Lines and coats fire protection or process water tankssubjected to immersion. Tile-Cote is a 2 package coating requiring equal parts by volume of parts A & B.Recommended Use:Coating concrete, wood and wall board surfaces in food processing rooms, shower and locker rooms, swimming poolareas, laboratories, clean rooms, dairy operations, pulp and paper mills and chemical processing structures andequipment. Finishing structural steel, industrial equipment and machinery, piping and interior tank surfaces of steel orconcrete.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead. Surfaces must be clean, dry and free of dirt, dust and other contaminants. Oil, grease and waxmust be removed by solvent washing to ensure proper adhesion and appearance of catalyzed epoxy. CONCRETEFLOORS — Thoroughly clean the floor with steam or solvents to remove all dirt, grease, oil and other contaminants.Thoroughly rinse the floor with clean water. Allow the floor to dry completely before coating. Water droplets should notbead up on a properly prepared floor, but should slowly soak into the surface and the concrete should have a profilesimilar to fine to medium sandpaper. If the profile is too smooth, or if water does bead up, mechanical abrasion may berequired. FERROUS METAL — Industrial structures subject to fumes, splash or spillage should be “Commercial” sandblasted (SSPC-SP6) or prepared by power brushing or needle guns (SSPC-SP3). Surfaces subject to severeexposure, such as immersion, require “Near White Metal” sand blasting (SSPC-SP10). WOOD SURFACES — Shouldbe sanded smooth and cleaned. MASONRY BLOCK AND POURED CONCRETE — Should be “Bricked-down” toremove all nibs and mortar splatter. PREVIOUSLY PAINTED SURFACES — Painted coating must be tightly adheredto substrate or be removed by mechanical means. Glossy surfaces including old epoxy and urethane coating shouldbe sanded and dusted clean to ensure proper adhesion of finish coats. A small patch of Tile-Cote should be applied toold surfaces to determine if the previous coating is capable of receiving catalyzed epoxy without blistering or lifting.Use Epoxy Thinner No. 2310** for thinning and for cleaning application tools.Architectural Specifications:PRIMERS & FINISHES: Recommended primers should always be used for specified surfaces. Two finish coats areusually recommended over primed surfaces to achieve desired mil thickness. ▪ MASONRY BLOCK - 1 coat Mason-Cote® 100% Acrylic Block Filler; 2 coats Tile-Cote Epoxy Finish. ▪ CONCRETE, BRICK - 2 coats Tile-Cote Finish. ▪SHEETROCK, VENEER PLASTER, PLASTER, WOOD - 1 coat 100% Acrylic Latex Enamel Undercoat; 2 coats Tile-Cote Epoxy Finish. ▪ FERROUS METALS: One coat Prime-Line® 17XX-series primer, 2 coats of Tile-Cote Epoxyfinish. GALVANIZED METALS: 2 coats of Tile-Coat directly over properly cleaned galvanized metal. ▪ PREVIOUSLYPAINTED SURFACES - 2 coats Tile-Cote Epoxy Finish. Old paint film must be sound. Test small area for compatibilitybefore finishing with Tile-Cote Epoxy Finish.Precautions:Exterior applications will surface chalk rapidly on exposure to ultraviolet rays, but painted film is not damaged.Industrial colorants used for tinting should be added to Component “A” before catalyzation. Surface and airtemperature should be above 65°F during application and curing. Test patch previously applied coatings with Tile-Coteto avoid possible blistering or lifting of old paint films. Do not intermix with other finishes or coatings. CAUTION: TILE-COTE used on floors becomes slippery when wet. Use caution signs during cleaning. Where skid resistantcharacteristics are required, add approximately one pint of Skid Grip Compound #1000 per gal. of catalyzed TILE-COTE. To maintain effective skid resistance, coated floor surface must be properly cleaned of dirt, oils, food andbeverage residue.Safety Information:PART A CONTAINS: AROMATIC NAPHTHA, 2-BUTOXYETHANOL, 2-PROPOXYETHANOL & POLYAMIDERESIN. Keep away from heat and flame. To avoid breathing vapors or spray mist, open windows and doors or useother means to ensure fresh air during application and drying. If you experience eye watering, headaches or dizziness,increase fresh air or wear respiratory protection (NIOSH/NSHA TX 23C or equivalent) or leave the area. Closecontainer after each use. Avoid contact with skin, eyes or clothing. PART A & B (MIXED) MATERIALS MAY HAVEHAZARDS OF BOTH COMPONENTS. PART B CONTAINS: AROMATIC NAPHTHA, 2-PROPOXYETHANOL, 2-BUTOXYETHONOL & EPOXY RESIN. Keep away from heat and flame. To avoid breathing vapors or spray mist,open windows and doors or use other means to ensure fresh air or wear respiratory protection (NIOSHA/MSHA TC23C or equivalent) or leave the area. Close container after each use. Avoid contact with skin, eyes or clothing. USEWITH ADEQUATE VENTILATION. NOTICE: Reports have associated repeated and prolonged occupational overexposureto solvents with permanent brain and nervous system damage. Intentional misuse by deliberatelyconcentrating and inhaling the contents may be harmful or fatal. KEEP OUT OF REACH OF CHILDREN. FORINDUSTRIAL USE ONLY.*Note: <strong>California</strong> Maximum <strong>Paints</strong> VOC ▪ 150 is Dascomb for combined Rd. components ▪ Andover, MA A+B▪ 01810 ▪ www.californiapaints.com ▪ 800-225-11415/31/2012Tile-Cote® Polyamide Epoxy ImpactedImmersion Coating 12XXProduct Specifications:Type: Polyamide EpoxyExposure: Interior or ExteriorSpecular Gloss: 80@ 60° ± 5Volume Solids: 47.2 % ±2Solids by Weight: 61.5 % ±2Vehicle: 74.3 % ±2Pigment: 25.7 % ±2Dry Film Thickness: 2.4 milsViscosity @ 77 °F: 83KU ± 3Maximum VOC: 780* g/literFlash Pt °F: 103Thinner: 2310Clean-Up: Mix Xylol/acetoneAvailable Colors and Bases:4 StockAvailable Package Sizes:2 Gal. Kit(Weight Per Gallon: 10.2 lbs. ± .5 lb)Drying Times:To Touch: 3 hrs.To Handle: 8 hrs.To Recoat: 4-8 hrs.Surface Spread Rate:Smooth: 300-375s.f./gal.Porous: 175-250 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip
Product Description:INDUSTRIALInteriorTuf-On Waterborne Epoxy Gloss Enamel is a highly durable, abrasion resistant, catalyzed coating. This two-packagecoating is available in a full range of bases for tinting and two standard gray colors. Tuf-On is resistant to commonhousehold stains and its chemical and solvent resistance properties are superior.Recommended Use:Tuf-On is designed for use on new or previously painted interior concrete floors, masonry, concrete blocks, wallboard,plaster, fiberglass, wood (not hardwoord floors or exterior exposures), treated galvanized metals, steel, aluminum orother surfaces in sound condition. Tuf-On can be applied over conventional coatings without the lifting or wrinklingcommon with solvent based epoxies. Tuf-On can be used on garage floors, manufacturing plants, schools, hospitalsand chemical handling facilities.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Tuf-On Waterborne Epoxy is self-priming over previously painted sound surfaces, but to assure good adhesion, asmall test patch application is recommended. Be sure that the existing paint is soundly adhered to the substrate beforeproceeding. Scribing an "X" in the original finish and applying an adhesive tape (such as cellophane tape or duct tape)and snapping it off quickly will tell you if the original paint's adhesion is satisfactory if more than a third of the area isremoved, don't apply Tuf-On until all of the existing paint is removed. If new wood is cedar or redwood, applications ofa stain blocking primer such as Wipe-Out is recommended. Applications over bare steel require a metal primer beforeapplication of Tuf-On. All bare concrete floors should be acid etched with a 10% muriatic acid solution. Be sure towear personal protection for your eyes and hands during this process. After etching rinse with clean water and allowthe surface to dry for at least 24 hours before coating with Tuf-On.Tuf-On Waterborne Epoxy Gloss coating consists of two components. Component A is a partially-filled galloncontainer holding 3 quarts* of base component to which a full quart of Component B should be added, This is a mixingratio of three to one by volume. Stir each component separately to assure uniformity. Then mix the two components bypouring the B component into the component A container. Mix well and wait 30 minutes to insure induction before use.If the Tuf-On is to be tinted, add the universal colorant to the component A and stir well before adding the componentB. Mix thoroughly. The pot life is 4 hours at 70-77º F.*NOTE: The fill levels for component "A" for tint bases will be: Pastel: 94oz., Medium: 92oz., Deep: 88oz., Neutral:84oz.Architectural Specifications:Two coats are recommended for most applications for best results. Be sure to apply the second coat within three daysor it will be necessary to sand the substrate to assure optimum adhesion. Application can be by brush, roller or spray.Up to 1/2 pint of water can be added per catalyzed gallon to adjust viscosity. First coat applications over porousunpainted surfaces should be thinned with up to 1/2 pint of water per catalyzed gallon to assure penetration. Allfloor enamels are more slippery when the surface becomes wet or contaminated by dirt, oils, food or beverageresidues or other debris To help reduce the possibility of slipping on a dry, clean floor, add one pint of <strong>California</strong>Industrial #1000 Slip resistant additive or #2 Pumice per gallon of floor enamel before application. To attain the bestpossible skid resistance, coated areas must be kept dry, properly cleaned and maintained. Please note that althoughthis coating can be exposed to light service in 24 hours, the full service cure is 7 days at 77º F.Precautions:Tuf-On is not recommended for exterior applications since surfaces will gradually chalk in UV light and will change theoriginal coating appearance. Do not apply when surface temperatures are below 50º F. Do not subject coating to heavyabrasion for at least seven days after application. Not recommended for use over ceramic tile that may be exposed toconstant water exposures or steam (such as in a shower). Allow new concrete to cure for at least 30 days beforeapplying Tuf-On.Safety Information:CONTAINS: GLYCOL EITHER. Avoid prolonged breathing of vapors or spray mist. Wear gloves, safety goggles andrespiratory protection (NIOSH/MSHA TC 23C or equivalent). Avoid contact with eyes and skin. Wash hands afterusing. Close container after every use. Do not take internally. USE ONLY WITH ADEQUATE VENTILATION. KEEPFROM FREEZING. KEEP OUT OF REACH OF CHILDREN.5/31/2012Tuf-On® Waterborne Epoxy Gloss Enamel15XXProduct Specifications:Type:2 Part Epoxy*Exposure:InteriorSpecular Gloss: 75@ 60° ± 5Volume Solids: 30.6 % ±2Solids by Weight: 32.0 % ±2Vehicle: 77.4 % ±2Pigment: 22.6 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 93*KU ± 5Maximum VOC: 250 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:4 Bases2 GraysAvailable Package Sizes:1 Gal. Kit(Weight Per Gallon: 9.2 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 6-8 hrs.To Recoat: 24 hrs.Surface Spread Rate:Smooth: 275-325s.f./gal.Porous: 225-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic Fiber*Please note that the product specification data given for this coating is based on mixed components of No. 1536"Seacoast Gray".Airless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
INDUSTRIALInterior5/31/2012Rust-Stop DTM 100% Acrylic Latex Semi-GlossProduct Description:Ready to use odorless vinyl acrylic eggshell latex paint formulated for airless spray application on interior surfaces.Excellent for use over galvanized metal, aluminum, gypsum board, plaster, wood, masonry surfaces, and completelyprimed ferrous metal. These latex spray paints can be used as dry fall paints on ceilings 16 feet or higher when therelative humidity is less than 70%.Recommended Use:Ideal for wall and ceiling surfaces in industrial plants, commercial buildings, warehouses, public institutions, schoolsand churches.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean, dry and free of dirt, dust and other contaminants.GALVANIZED METAL - Oil residue should be wiped off with mineral spirits with a clean rag.CONCRETE — Remove nibs and mortar splatter.FERROUS METAL — Must be completely primed with a rust inhibiting primerGYPSUM BOARD, PLASTER , WOOD — Fill cracks and voids with oil free patching compounds.PREVIOUSLY PAINTED SURFACES — These products are compatible with old finishes except water soluble paintssuch as calcimine or casein. Test questionable areas with a sponge and water. If water softens the surface, the oldfinish will have to be removed before finishing with latex.Architectural Specifications:▪ WOOD, CONCRETE, GYPSUM BOARD, PLASTER, MASONRY BOARD2 coats Premium Spray Eggshell▪ FERROUS METAL — Unprimed1 coat Prime Line Red Oxide Primer #17031 coat Premium Spray Eggshell▪ GALVANIZED METAL1 or 2 coats Premium Spray Eggshell▪ PREVIOUSLY PAINTED SURFACES1 coat Premium Spray EggshellPrecautions:High humidity or low temperatures will retard drying time. Do not use as a primer for other paints. Air and surfacetemperatures should be 50°F or higher during application and drying time. Do not use over unprimed ferrous metal.Safety Information:CONTAINS:NON VOLATILE VINYL-ACRYLIC RESINSCAUTION!:KEEP OUT OF THE REACH OF CHILDRENDO NOT TAKE INTERNALLY.CLOSE CONTAINER AFTER EACH USE.KEEP OUT OF REACH OF CHILDRENFOR INDUSTRIAL USE ONLYProduct Specifications:Type: Vinyl Acrylic LatexExposure:InteriorSpecular Gloss: 7 @ 60° ± 2Volume Solids: 32.5 % ±2Solids by Weight: 52.4 % ±2Vehicle: 56.2 % ±2Pigment: 43.8 % ±2Dry Film Thickness: 2.5 milsViscosity @ 77 °F:105KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:5 Gallon(Weight Per Gallon: 11.9 lbs. ± .5 lb)Drying Times:To Touch: 1-2 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 200 s.f./gal.Porous: 150 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Spray -Airless .015 to .018 Tip / 40-60° AnglesRoller -Brush on roller for smallareas only<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Quick drying rust inhibiting acrylic latex flat primers/finishes for use over new or sound rusty ferrous metal surfacesfrom which mill scale and surface contaminants have been fully removed. Excellent for use over galvanized metal,aluminum, wood and masonry surfaces to be topcoated with latex, alkyd or oil modified urethane coatings.Recommended Use:Can be used successfully for priming miscellaneous iron, bar joists, ductwork, piping, galvanized metal, doors, sash,windows or for spot touching other abraded metal primers. May be used as a self-priming finish coat where a flatappearance is required.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Remove all oil, grease, dirt, loose or scaling paint, rust, mill scale and other foreign matter.FERROUS METAL — "Power Tool" clean (SSPC-SP3) back to sound substrate.ALUMINUM - Unfinished aluminum should be wiped with mineral spirits on a clean rag to remove oil. Aluminum oxideon old weathered aluminum should be removed with steel wool and mineral spiritsGALVANIZED METAL — Oil residue should be wiped off with mineral spirits on a clean rag.PREVIOUSLY PAINTED SURFACES — Prepare ruptured or scratched surfaces as for unfinished metal. Spot primebare metal as conditions dictate.Architectural Specifications:▪ FERROUS METAL - PRECLEANED ALUMINUM, GALVANIZED METAL, WOOD OR MASONRY1 coat Rust-Stop DTM Acrylic Latex Flat Primer/Finish1 or 2 coats Alkyd Enamel, or Tuf-Quik® Oil Modified Urethane Enamel, or Rust-Stop DTM 100% Acrylic Latex MetalPaint▪ PREVIOUSLY PAINTED SURFACESSpot-prime bare metal areas with1 coat Rust-Stop DTM Acrylic Latex Flat Primer/Finish1 or 2 coats Alkyd Metal Primer, or Tuf-Quik® Oil Modified Urethane Enamel, or Rust-Stop DTM 100% Acrylic LatexMetal PaintExtremely rusty surfaces may require a second coat of Rust-Stop PrimerPrecautions:On bare ferrous metal Rust-Stop DTM Acrylic Latex 1061, 1064, 1067 must be used under #1092,1093,1094 and1095. Surface and air temperature must be 50°F or above during application and drying time. Do not recoat withcoatings using aromatic or other strong solvents. Do not intermix with solvent base primers or finishes. Use Rust-StopDTM Latex Flat Primer/Finish as a base coat under alkyd and oil modified urethane finishes. Do not use Rust-StopDTM 100% Acrylic Latex Metal Paint for thispurpose. Do not use Rust-Stop when rain is imminent or when dew point is above 60 percent. Rust-Stop is notdesigned for tank interiors or for immersion service.Safety Information:CAUTION! KEEP OUT OF THE REACH OF CHILDREN.DO NOT TAKE INTERNALLY.CLOSE CONTAINER AFTER EACH USE.*Specifications based on 1061 WhiteINDUSTRIALInterior or Exterior5/31/2012Rust-Stop® DTM Acrylic Latex Flat Primer/Finish1061, 64, 67Product Specifications:Type:Acrylic Latex*Exposure: Interior or ExteriorSpecular Gloss: 9 @ 60° ± 3Volume Solids: 38.2 % ±2Solids by Weight: 49.5 % ±2Vehicle: 79.2 % ±2Pigment: 20.8 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 80KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteGrayRedAvailable Package Sizes:Quart Gallon 5 Gallon(Weight Per Gallon: 10.2 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 2 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 400-425s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:INDUSTRIALInteriorReady to use odorless vinyl acrylic flat latex paint formulated for airless spray application on interior surfaces.Economy Spray Paint may be used on wood, gypsum board, plaster, concrete, masonry block and completely primedferrous metal. This latex spray paint can be used as dry fall paints on ceilings 16 feet or higher when the relativehumidity is less than 70%.Recommended Use:Ideal for wall and ceiling surfaces in industrial plants, commercial buildings, warehouses, public institutions, schoolsand churches.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Surfaces must be clean, dry and free of dirt, dust and other contaminants.CONCRETE — Remove nibs and mortar splatter.FERROUS METAL — Must be completely primed with a rust inhibiting primer.GYPSUM BOARD, PLASTER , WOOD — Fill cracks and voids with oil free patching compounds.PREVIOUSLY PAINTED SURFACES — These products are compatible with old finishes except water soluble paintssuch as calcimine or casein. Test questionable areas with a sponge and water. If water softens the surface, the oldfinish will have to be removed before finishing with latex.Architectural Specifications:PRIMERS & FINISHES: Recommended compatible primers should always be used for specified surfaces.5/31/2012Dryfall Economy Latex Flat37XXProduct Specifications:Type: Vinyl Acrylic Latex*Exposure:InteriorSpecular Gloss: 4 @ 60° ± 2Volume Solids: 32.3 % ±2Solids by Weight: 52.8 % ±2Vehicle: 53.8 % ±2Pigment: 46.2 % ±2Dry Film Thickness: 2.5 milsViscosity @ 77 °F:103KU ± 3Maximum VOC: 50 g/literFlash Pt °F: Non combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteBlackAvailable Package Sizes:▪ WOOD, CONCRETE, GYPSUM BOARD, PLASTER, MASONRY BOARD2 coats Economy Spray Flat▪ FERROUS METAL — Unprimed1 coat Combatit® — Red Oxide Shop Primer #10501 coat Economy Spray Flat▪ PREVIOUSLY PAINTED SURFACES1 coat Economy Spray FlatPrecautions:High humidity or low temperatures will retard drying time. Do not use as a primer for other paints. Air and surfacetemperatures should be 50°F or higher during application and drying time. Do not use over unprimed ferrous metal.Safety Information:CONTAINS: NON VOLATILE VINYL-ACRYLIC RESINSCAUTION!: KEEP OUT OF THE REACH OF CHILDRENDO NOT TAKE INTERNALLY.CLOSE CONTAINER AFTER EACH USE.KEEP OUT OF REACH OF CHILDRENFOR INDUSTRIAL USE ONLY*Specifciations are for 3701 white5 Gallon(Weight Per Gallon: 12.0 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 175-225 s.f./gal.Porous: 130-160 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.015 to .018 Tip / 40-60°angles<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Mason-Cote Block Filler is a high quality exterior acrylic block filler formulated to fill small imperfections and pinholes inmasonry block and porous concrete before topcoating. This product contains mineral type fillers and fine silicaaggregates which fill voids and prevent seepage from driving rains and snow. This 100% acrylic block filler is easy toapply, alkali resistant and provides a uniform surface capable of receiving all types of finish coats. Mason-Cote BlockFiller is not water sensitive after application and its inherent flexibility gives it the finest characteristics available in anexterior block filler, far superior to cementitous and PVA block fillers.Recommended Use:Masonry block, concrete, brick, stoneINDUSTRIALInterior or ExteriorApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.5/31/2012Mason-Cote® 100% Acrylic Latex Block Filler3751Product Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 47.6 % ±2Solids by Weight: 66.9 % ±2Vehicle: 44.1 % ±2Pigment: 55.9 % ±2Dry Film Thickness: 3.8 milsViscosity @ 77 °F:112KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterNibs and mortar joints should be “bricked down” to remove all protrusions and mortar splatters. All dirt, grease, oil andother contaminants should be removed by brushing or solvent washing. Mason-Cote Block Filler is supplied ready touse and can be applied by brush or roller. Spray application is not recommended because the silica content is abrasiveto spray equipment.Thin sparingly with water, if thinning is necessary. Maximum block filling qualities are achieved with use of a roller (3/8”in nap or longer). Mason-Cote Block Filler should be applied full body vertically and cross hatched horizontally toremove all roller ridges and uneveness in the block filler. Brushing should be done with a short stubby brush, workingthe material well into the pinholes, pores and voids. Material should be applied in horizontal sections with the blockmortar lines serving as a guide.Architectural Specifications:▪ CONCRETE BLOCK, MASONRY1 coat Mason-Cote Block Filler1 or 2 coats <strong>California</strong> Acrylic Latex, Alkyd, Urethane or EpoxyPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50°F or when drying conditions are poor. Keep from freezing.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.Available Colors and Bases:WhiteAvailable Package Sizes:5 Gallon(Weight Per Gallon: 13.2 lbs. ± .5 lb)Drying Times:To Touch: 4-8 hrs.To Handle: 16 hrs.To Recoat: 24 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth:s.f./gal.Porous: 190-210 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -Not Recommended<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:INDUSTRIALInterior or ExteriorStonite Waterborne Acrylic Masonry Primer is a highly alkalai resistant coating which dries to a clear film designed tobe used under various topcoats.Recommended Use:Stonite Waterborne Acrylic Masonry Primer can be used to seal previously painted and new masonry surfaces.Concrete floors that are to be topcoated with alkyd, oil modified urethane or latex finishes can be sealed with thisconditioning sealer.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead. Remove all dirt, loose mortar, grease and oil, efflorescence and mildew by sanding, scraping orpreferably power-washing. Patch all holes and cracks with appropriate patching compounds. If mildew is present,remove using a sodium hypochlorite/water wash or commercial mildew wash followed by a clean water rinse. Stirthoroughly before use. Apply Stonite by brush, roller or spray. Work Stonite into cracks and crevices to insure propersealing. Do not thin with water or other solvents, but small amounts of clean water may be added. Do not apply whenair and surface temperatures are below 50ºF. Clean tools and equipment immediately after use while coating is stillwet using warm, soapy water. Local disposal requirements may vary. Check with your local sanitation department orstate environmental agency for disposal options.Architectural Specifications:▪Poured concrete, Masonry block1 coat Stonite Waterborne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> Acrylic Latex▪Concrete Floors:1 coat Stonite Waternorne Acrylic Masonry Primer 70071 or 2 coats <strong>California</strong> Latex, Alkyd or Urethane Floor Enamel▪Cementous <strong>Paints</strong>- Repainted:1 coat Stonite Waterborne Acrylic Masonry Primer1 or 2 coats <strong>California</strong> Acrylic Latex▪Stucco- Unpainted1 coat Stonite Waterborne Acrylic Masonry Primer1 or 2 coats <strong>California</strong> Acrylic LatexStonite® Waterborne Acrylic Masonry PrimerPrecautions:Do not add solvents, oils or colors in oil, or mix with other paint types. Do not apply when air or surface temperature isbelow 50° F or when drying conditions are poor. Keep from freezing. Use adequate ventilation.Safety Information:CONTAINS: PROPYLENE GLYCOL PHENYL ETHER AND 2-AMINO-2-METHYL-1-PROPANOL. CAUSES EYEIRRITATION. Use only with adequate ventilation. Do not breathe vapors, spray mist or sanding dust. Avoid contactwith eyes and prolonged or repeated contact with skin.Wear eye protection and gloves during application or sanding. Adust/particulate respirator approved by NIOSH should be worn when sanding or spraying. Close container after eachuse. FIRST AID: If affected by inhalation of vapors or spray mist, remove to fresh air. In case of eye contact, flushimmediately with plenty of water for at least 15 minutes and call a physician; for skin, wash thoroughly with soap andwater. In case of ingestion- DO NOT INDUCE VOMITING, call physician immediately. KEEP FROM FREEZING.KEEP OUT OF THE REACH OF CHILDREN.5/31/20127007Product Specifications:Type:Acrylic LatexExposure: Interior or ExteriorSpecular Gloss:NA@ 60° ±Volume Solids: 26.7 % ±2Solids by Weight: 27.8 % ±2Vehicle: 100.0 % ±2Pigment: 0 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: NAKU ±Maximum VOC: 200 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:ClearAvailable Package Sizes:QuartGallon(Weight Per Gallon: 8.5 lbs. ± .5 lb)Drying Times:To Touch: 1 hrs.To Handle: 2 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 250-300s.f./gal.Porous: 200-250 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:INDUSTRIALInterior or ExteriorThis durable multi-purpose alkyd gloss enamel is formulated to protect a variety of interior or exterior surfaces. Itprovides an economical finish for most surfaces in offices, institutions and other commercial applications, industrialmetal structures and structural components. WEAR-ALL Multi-Purpose Alkyd High Gloss Enamel is suitable forfrequent repeated heavy abrasion, including mechanical wear and repeated frequent scrubbing with certain industrialsolvents, cleansers or scouring agents. This all-purpose industrial enamel will withstand repeated detergent washingswithout injury to the paint and can be readily recoated when necessary.Recommended Use:Machinery, Landings, Industrial Flooring, Handrails, Steps, Racks, Shelving, ToolsWear-All® Multipurpose Alkyd High Gloss EnamelApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.5/31/2012242XXProduct Specifications:Type:AlkydExposure: Interior or ExteriorSpecular Gloss: 70@ 60° ± 5Volume Solids: 45.5 % ±2Solids by Weight: 63.3 % ±2Vehicle: 71.6 % ±2Pigment: 28.4 % ±2Dry Film Thickness: 2 milsViscosity @ 77 °F: 85KU ± 5Maximum VOC: 340 g/literFlash Pt °F: 103Thinner: Mineral SpiritsClean-Up: Mineral SpiritsSurfaces to be painted must be free of dust, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap and othersurface contamination. On new wood or concrete surfaces WearAll Alkyd High Gloss Enamel is self-priming. Apply asthinly as possible using a multi-coat system on new surfaces.Ferrous Metal - Clean, then prime with Larcoloid® Rust Inhibiting Metal Primer.Wood - New wood should be clean, dry and sanded if necessary.Previously Painted Surfaces - Wash, sand or dust and remove any loose paint to obtain a paintable surface.Glossy Surfaces - Dull by sanding to insure proper adhesion of paint.Concrete - Porous or dusty concrete must be sealed with Stonite® Masonry Conditioner. New concrete must cure aminimum of 30 days and have a moisture content below 15%. Steel troweled smooth concrete with hardeners orcuring membranes may require abrasion to obtain proper adhesion.Architectural Specifications:▪ Wood:2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XX▪ Concrete, Non-Porous Masonry:2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XX▪ Porous Masonry and Block:1 coat Mason-Cote® Block Filler 37511 or 2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XX▪ Ferrous Metal - Un-primed:1 coat Larcoloid® Rust Inhibiting Metal Primer 211501 or 2 coats Wear-All Multi-Purpose Alkyd High Gloss Enamel 242XXPrecautions:Do not add water, oils or mix with other paint types. Do not apply when air or surface temperature is below 50° F orwhen drying conditions are poor. Do not apply to concrete below ground or directly on moist ground without thoroughlyetching. Inadequate ventilation, high humidity, low temperatures or thick applications will greatly retard drying time.All coated walking surfaces become slippery when the surface is wet or contaminated. To reduce the possibility ofslipping, skidding or falling add one pint of #1000 Slip Resistant Additive or #2 Pumice per gallon of enamel beforeapplication. To maintain the best possible skid resistance, coated areas must be kept dry and properly cleaned of dirt,oils, food and beverage residue and any other contaminants.Safety Information:CAUTION! COMBUSTIBLE! Use only with adequate ventilation. Keep out of reach of children. Do not takeinternally. Close container after each use.Keep away from heat and flame. To avoid breathing vapors or spray mist, open windows and doors or use othermeans to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness,increase fresh air or wear respiratory protection (NIOSH/MSHA TC 23C or equivalent) or leave the area. Closecontainer after each use. Avoid contact with skin. If this product is swallowed, call a physician immediately. Nevergive anything by mouth to an unconscious person. Treat symptomatically.NOTICE: Reports have associated repeated and prolonged occupational exposure to solvents with permanent brainand nervous system damage. Intentional misuse by deliberately concentrating and inhaling this product may beharmful or fatal.Available Colors and Bases:WhitePastelDeep8 StockMediumNeutralAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 9.6 lbs. ± .5 lb)Drying Times:To Touch: 4-6 hrs.To Handle: 16 hrs.To Recoat: 24 hrs.Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-350 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)Short Nap Synthetic orNatural FiberAirless Spray -0.011 to 0.013 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:INDUSTRIALInterior or ExteriorThis crystal clear multi-purpose acrylic sealer provides non-yellowing protection to a large variety of surfaces.LACRYLIC will seal both interior and exterior poured concrete wall and floor surfaces, to prevent both waterpenetration and surface dusting. This material can be topcoated with itself to provide an abrasion resistant clearcoating, or topcoated with pigmented alkyd or urethane. Flagstone, terra cotta and slate can be sealed and finishedwith two coats of LACRYLIC. LACRYLIC seals common red brick and prevents oxide bleed-through on finish coats ofpaint. LACRYLIC will also seal old unfinished stucco to prevent loss of adhesion of latex finish coats. LACRYLIC isan excellent sacraficial anti-graffiti coating.Recommended Use:Masonry, Stucco, Flagstone, Brick, Concrete FloorsApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Remove all surface contaminants including grease, oil, rust, stains, dirt, dust, wax and mortar splatter. New concretemust cure for a minimum of 28 days prior to application of Lacrylic. Lacrylic is supplied at proper applicationconsistency and generally requires no thinning. Material can be applied successfully by brush, roller or airless spray.Apply full-body working the material into the pores of the surface. Clean up sealer spatters and equipment immediatelyafter use with #2308 thinner.Architectural Specifications:▪ Concrete Floors2 coats Lacrylic Clear Anti-graffiti / Waterproofing Coating▪ Patio Flagstone, Terra Cotta2 coats Lacrylic Clear Anti-graffiti / Waterproofing Coating▪ Brick – Painted: Common, Red Clay Type (or soot stained)1 coat Lacrylic Clear Anti-graffiti / Waterproofing Coating2 coats <strong>California</strong>® Acrylic Latex▪ Wood (& Plywood): Low Gloss Stain Proof Finish2 coats Lacrylic Clear Anti-graffiti / Waterproofing CoatingLacrylic® Clear Anti-Graffiti / Waterproofing CoatingPrecautions:Do not mix with water or other type paints. Do not apply below 40°F or apply to a damp surface. Not recommended asa sealer on glazed, quarry or other ceramic type tiles. Steel troweled concrete must be acid etched prior to applicationof Lacrylic to ensure adhesion to the concrete. Steel troweled smooth concrete with a curing membrane or hardenermay require abrasion to obtain proper adhesion.Safety Information:DANGER! HARMFUL OR FATAL IF SWALLOWED. COMBUSTIBLE. HARMFUL IF INHALED. MAY AFFECT THEBRAIN OR NERVOUS SYSTEM, CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES NOSE, THROAT, EYEAND SKIN IRRITATION. CONTAINS PETROLEUM DISTILLATEKeep away from heat and flame. To avoid breathing vapors or spray mist, open windows and doors or use othermeans to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness,increase fresh air or wear respiratory protection (NIOSH/MSHA TC 23C or equivalent) or leave the area.Do not transfer contents to unlabeled bottles or other containers.Close container after each use. Avoid contact with skin.FIRST AID: If swallowed, CALL A PHYSICIAN IMMEDIATELY. Never give anything by mouth to an unconsciousperson.USE WITH ADEQUATE VENTILATION.NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanentbrain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may beharmful or fatal.FOR INDUSTRY USE ONLYKEEP OUT OF REACH OF CHILDREN5/31/20127110Product Specifications:Type: Solvent AcrylicExposure: Interior or ExteriorSpecular Gloss:NA@ 60° ±Volume Solids: 14.9 % ±2Solids by Weight: 19.1 % ±2Vehicle: 100 % ±2Pigment: % ±2Dry Film Thickness: 1.2 milsViscosity @ 77 °F: NAKU ±Maximum VOC: 600 g/literFlash Pt °F: 108Thinner: 2308Clean-Up:XylolAvailable Colors and Bases:CleartoneAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 7.8 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 1 hrs.To Recoat: 1 hrs.Surface Spread Rate:Smooth: 150-175s.f./gal.Porous: 100-125 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Natural BristleRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.011 to .013 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Grid-Stripe is a long lasting, highly visible athletic field marking paint designed to put bright, sharp lines on grasssurfaces. This non-toxic material will not chalk, rub off on athletic jerseys or wash away during rainy periods. Grid-Stripe is LIME FREE so that players are protected against burns and eye injuries caused by contact with limemarkings on athletic fields.Recommended Use:Football, soccer, lacrosse, field hockey, baseball and other athletic fields.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Grass should be comparatively short before application of Grid-Stripe. Application should not be attempted if surfacesare wet from dew or rain to avoid blurring of athletic markings. Grid Stripe can be applied by any gravity fed, spray orroller type line marking machine. Initial application usually requires two coats to achieve bright, sharp lines. First coatshould be thinned about 10% with water. Second coat can be applied in approximately one hour. Relining orpatchings should be done as necessary to maintain proper athletic field marking. Normal life expectancy is about twoweeks when grass is cut on a regular basis.Architectural Specifications:NAINDUSTRIALExteriorPrecautions:Material should not be thinned with solvent. Grid-Stripe should not be applied below 50°F or when rain is imminent.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Grid-Stripe® Athletic Field Marking1001Product Specifications:Type: Vinyl Acrylic LatexExposure:ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 33.0 % ±2Solids by Weight: 54.0 % ±2Vehicle: 53.0 % ±2Pigment: 47.0 % ±2Dry Film Thickness: milsViscosity @ 77 °F:100KU ± 5Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 12.2 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 1-2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth:Porous:s.f./gal.s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Spray -Marking MachineRoller -Marking Machine<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:INDUSTRIALExteriorLatex White Field Marking #1006 is an economical athletic field marking paint designed to put bright, sharp lines ongrass surfaces. This non-toxic material will not chalk, rub off on athletic jerseys or wash away during rainy periods.Latex White Field Marking #1006 is LIME FREE so that players are protected against burns and eye injuries caused bycontact with lime markings on athletic fields.Recommended Use:Football, soccer, lacrosse, field hockey, baseball and other athletic fields.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.Grass should be comparatively short before application of Latex White Field Marking #1006. Application should not beattempted if surfaces are wet from dew or rain to avoid blurring of athletic markings.Latex White Field Marking #1006 can be applied by any gravity fed, spray or roller type marking machine. Initialapplication usually requires two coats to achieve bright, sharp lines. First coat should be thinned about 10% with water.A second coat can be applied in approximately one hour. Re-lining or patching should be done as necessary tomaintain proper athletic field marking. Normal life expectancy is about two weeks when grass is cut on a regular basis.5/31/2012Economy Latex White Field Marking1006Product Specifications:Type: Vinyl Acrylic LatexExposure:ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 32.4 % ±2Solids by Weight: 52.8 % ±2Vehicle: 53.9 % ±2Pigment: 46.1 % ±2Dry Film Thickness: milsViscosity @ 77 °F:102KU ± 3Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteArchitectural Specifications:NAPrecautions:Material should not be thinned with solvent. Latex White Field Marking #1006 should not be applied below 50°F orwhen rain is imminent.Safety Information:CONTAINS NON VOLATILE VINYL-ACRYLIC RESINSCAUTION!: KEEP OUT OF THE REACH OF CHILDRENDO NOT TAKE INTERNALLY.CLOSE CONTAINER AFTER EACH USE.Available Package Sizes:5 Gallon(Weight Per Gallon: 12.0 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 4 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth:N/As.f./gal.Porous: N/A s.f./gal.(Spray Application is 50% of above)Tools and Equipment:<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Latex Traffic & Zone Marking Paint is a glare free, non-toxic paint to be used for designating all types of lanes andzones in factories. The yellow can be used successfully as an athletic field marking paint that is free of lead hazards.Recommended Use:Suitable for line marking on pavement zones, lanes, indentification of traffic aisles in factories and warehouses orathletic surfaces.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.For zone marking, clean the surface of all dirt, dust, grease, oil or other contaminants. Thin with a small amount ofwater only if necessary. Athletic field grass should be short and dry for proper application. Thin with up to one gallon ofwater to 3 gallons of paint for this application.Architectural Specifications:NAINDUSTRIALInterior or ExteriorPrecautions:Material should not be thinned with organic solvent. Surface and air temperature should be above 50°F during drying.Safety Information:KEEP FROM FREEZING. Keep out of reach of children. Do not take internally. Close container after each use.5/31/2012Traffic and Zone Marking Paint Latex1081,5Product Specifications:Type: Vinyl Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 34.1 % ±2Solids by Weight: 51.0 % ±2Vehicle: 63.0 % ±2Pigment: 37.0 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F:107KU ± 3Maximum VOC: 150 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteYellowAvailable Package Sizes:Gallon5 Gallon(Weight Per Gallon: 11.2 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 2 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 250-300 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:INDUSTRIALInterior or ExteriorA subdued gloss 100% acrylic latex finish for swimming pools, pool areas and adjacent wood or concrete patios oraprons. This durable 100% acrylic latex pool paint will withstand normal abrasion, strong detergents and swimmingpool chemicals. 100% Acrylic Latex Swimming Pool Paint is water borne, applies smoothly and quickly withoutoffensive odors and allows easy equipment cleanup with detergent and water, making it ideal for homeownerapplication.Recommended Use:100% Acrylic Latex Swimming Pool Paint provides excellent protection to both new and previously finished concrete,gunite, fiberglass, polyester, bituminous and aluminum swimming pools that are to be filled with fresh or salt water.Application:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.5/31/2012100% Acrylic Latex Swimming Pool Paint*24XXProduct Specifications:Type: 100% Acrylic LatexExposure: Interior or ExteriorSpecular Gloss: 30@ 60° ± 5Volume Solids: 35.4 % ±2Solids by Weight: 48.2 % ±2Vehicle: 77.4 % ±2Pigment: 22.6 % ±2Dry Film Thickness: 1.5 milsViscosity @ 77 °F: 75KU ± 5Maximum VOC: 340 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterConcrete Pools - New or Unfinished - Allow new concrete to age at least 30 days. Acid etching of all new or unfinishedconcrete is required to remove free alkali and help in the removal of form release and curing agents. Etching alsoprovides “tooth” on smooth metal troweled concrete surfaces. Etching also provides “tooth” on smooth metaltroweledconcrete surfaces. Etch with a 15% solution of muriatic acid. Allow solution to bubble on concrete surface for 10minutes, rinse well with clean water and allow to dry. Use rubber gloves and protect eyes when handling acid.Gunite or Marble Dust Pools - Unfinished - These pools are not normally painted for the first few seasons until surfacesbecome stained or dingy. Before painting, remove dirt, grease, hair and body oils by scrubbing with a solution oftrisodium phosphate and water (2 oz. to 1 gallon of water.) Use special cleaning emphasis on waterline areas. Rinsewell with clear water and allow to dry before painting. Do not acid etch this type of pool.Bituminous & Fiberglass Polyester Pools - Unfinished - Remove dirt, grease, hair and body oils by scrubbing with asolution of trisodium phosphate and water (2 oz. to 1 gallon of water.) Use special cleaning emphasis on waterlineareas. Rinse well with clear water and allow to dry before painting. Do not acid etch this type of pool.Aluminum Pools - Remove dirt, grease, hair and body oils by scrubbing with a solution of trisodium phosphate andwater (2 oz. to 1 gallon of water.) Use special cleaning emphasis on waterline areas. Rinse well with clear water andallow to dry before painting. Prime aluminum surfaces with etching primer containing phosphoric acid (such as DOD-P-15328 formula 117 for metals) to insure proper adhesion of swimming pool finish coats.Previously Painted Pools - Remove dirt, grease, hair and body oils by scrubbing with a solution of trisodium phosphateand water (2 oz. to 1 gallon of water.) Use special cleaning emphasis on waterline areas. Rinse well with clear waterand allow to dry before painting. Spot touch bare spots with <strong>California</strong> 100% Acrylic Latex Swimming Pool Paint beforefinish painting.Concrete Patios & Pool Aprons - Treat in a similar fashion to concrete swimming pools.Architectural Specifications:▪ Previously Painted Surfaces:2 coats 100% Acrylic Latex Swimming Pool Paint 24XX▪ Ferrous Metals:1 coat zinc rich primer or rust-inhibiting primer recommended for immersion service2 coats 100% Acrylic Latex Swimming Pool Paint 24XX▪ Polyester Fiberglass & Bituminous:2 coats 100% Acrylic Latex Swimming Pool Paint 24XX▪ Aluminum:1 coat etching primer containing phosphoric acid (such as DOD-P-15328 formula 117 for metals)2 coats 100% Acrylic Latex Swimming Pool Paint 24XX▪ Concrete:1 thin coat 100% Acrylic Latex Swimming Pool Paint 24XX2 coats 100% Acrylic Latex Swimming Pool Paint 24XXPrecautions:Air and surface temperature must be 50°F or higher during application and cure. Keep from freezing. Used adequateventilation. *PLEASE READ PUBLICATION ON POOL PAINT APPLICATION AND PREPARATION PRIOR TO USE.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use. For professional use only.Available Colors and Bases:5 StockAvailable Package Sizes:Gallon(Weight Per Gallon: 10.4 lbs. ± .5 lb)Drying Times:To Touch: 2 hrs.To Handle: 16 hrs.To Recoat: 4 hrs.Surface Spread Rate:Smooth: 350-400s.f./gal.Porous: 275-325 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -(@ 70-77 °F, 50% R.H.)3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Product Description:Interior or ExteriorHighly reflective marking paint for use over any bituminous surface or color coating system in recreational or lighttraffic areas. The finished application is non-glaring, highly resistant to climatic conditions, fast drying, easily applied,and provides excellent hiding. <strong>California</strong> Hi-Hide Line Marking Paint will not cause crazing, cracking, peeling ordeterioration to asphalt that is typical of solvent-type traffic paints. Also available as a texture line paint containing finesilica fillers. Other colors available on request.Recommended Use:Marking of Recreational Surfaces, Parking Lots, Curbs, BermsApplication:WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY INCHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator tocontrol lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protectyourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on towww.epa.gov/lead.The surface must be clean, sound, free of dust, dirt, oil, grease and loose particles. For repainting, remove chalkysurface dust by power washing surface with a stiff bristle brush and water.Application:Apply by nylon brush or pressure-type spray equipment, snap chalk lines to give side limits for brush application, usetemplate or tape lines with double wide tape applicators.Test spray gun for proper nozzle and pressure to prevent overspraying. Do not atomize. Use pressure only.This product is ready to use from container. If thinning is required on hot dry surface, add only clear water. Applyevenly and uniformly. Use care in kneeling or walking on surfaces during application to prevent indentations ofsurrounding areas.Architectural Specifications:▪ <strong>California</strong> Hi-Hide Line Marking Paint is a 100% acrylic latex type formulated especially for use over sand-filled 100%acrylic recreational surfaces or directly on bituminous surfaces including emulsified asphalt and tar emulsion types.Plexicolor will not cause lifting, cracking, peeling or other damage to the base. White Plexicolor will not yellow.5/31/2012<strong>California</strong> Hi-Hide Line Marking Paint6020 White; 6220 Textured WhiteProduct Specifications:Type: 100% Acrylic Latex*Exposure: Interior or ExteriorSpecular Gloss: 2 @ 60° ± 2Volume Solids: 35.0 % ±2Solids by Weight: 53.0 % ±2Vehicle: 64.6 % ±2Pigment: 35.4 % ±2Dry Film Thickness: 2-3 milsViscosity @ 77 °F: 80-95 KU ± 0Maximum VOC: 100 g/literFlash Pt °F: Non-combustibleThinner:WaterClean-Up: Soap & WaterAvailable Colors and Bases:WhiteYellowRedBlueTextured WhiteGreenOrangeAvailable Package Sizes:GallonBlack5 GallonPrecautions:Do not mix with oils, solvents or other paints.Do not apply when air or surface temperature is below 50°F or when rain or high humidity is imminent.Apply when ambient temperature is 50°F and rising.Do not apply if surface temperature is in excess of 140°F.Allow asphalt surfaces to cure 14 days before application.STORE IN A COOL PLACE, NEVER IN THE HOT SUN.Do not allow to run or drip on adjacent areas. Remove any drips immediately with water before drying occurs. Cleanall brushes and equipment with water immediately after use.Safety Information:Keep out of reach of children. Do not take internally. Close container after each use.CAUTIONThis product contains more than 0.1% crystalline silica (CAS No. 14808-60-07) which has been classified by IARC asa Class 1 carcinogen. Normal application procedures pose no hazard since the silica is wet and encapsulated, butgrinding or sanding dried films may yield respirable silica dusts. Control exposures to less than 0.1 mg/m³ usingNIOSH approved dust filter respirators.* Data supplied is based on Plexicolor 6020 White. Other colors available.(Weight Per Gallon: 11.6 lbs. ± .5 lb)Drying Times:To Touch: .5 hrs.To Handle: 1 hrs.To Recoat: 2 hrs.(@ 70-77 °F, 50% R.H.)Surface Spread Rate:Smooth: 200s.f./gal.Porous: 150 s.f./gal.(Spray Application is 50% of above)Tools and Equipment:Brush -Synthetic, Nylon or PolyesterRoller -3/8" Nap Synthetic FiberAirless Spray -.017 to .019 Tip<strong>California</strong> <strong>Paints</strong> ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.californiapaints.com ▪ 800-225-1141
Change language