Release 162 Notes - Nvidia's Download site!!

: Known Product LimitationsDriver Reports 256 MB Memory on NVIDIA Quadro FX330 Cards• ProblemWhen a 64 MB NVIDIA Quadro FX 330 card is installed, the driver reportsthat the card needs 256 MB, causing 256 MB of address space to beconsumed.• ExplanationThis is not a bug but a product limitation.The NVIDIA Quadro FX 330 GPU has some limitations that prevent the cardfrom addressing less than 256 MB of system memory.Video Playback in nView Clone and Span Modes• ProblemWith nView Clone or Span mode enabled, video playback appears on onlyone display under the following conditions:• Under nView Clone mode, when full‐screen video mirror is not used.• Under nView Span mode, when full‐screen video mirror is not used andthe video is positioned to span across both monitors.• ExplanationWith applications that render using the hardware overlay—such as DirectXapplications—the default driver behavior is to enable the hardware overlaywhen nView Clone or Span mode is enabled.Because the driver supports only one hardware overlay, the video appears on onlyone display.Monitor Ordering in the Windows Settings PageMonitor Ordering on a Single GPU• IssueThe monitor order in the Display Properties Settings page is not consistentlymatched with the connectors on the graphics card.• ExplanationThe driver does not distinguish connector positions, but insteaddistinguishes the display type, and consequently assigns monitor numbersaccording to the display type and not according to the connector.22 NVIDIA Corporation