Body Removal Brassworks A3 - Bachmann
Body Removal Brassworks A3 - Bachmann
Body Removal Brassworks A3 - Bachmann
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LNER / BRCLASS <strong>A3</strong>4-6-2Step 1Unsolder the cylinder pipes from the rearof the front steps. Hold away from thesteps with tweezers.Step 2Remove centre screw on front bogie.
Step 11Carefully lift chassis out of body, takingcare with cylinder drain cock pipes.Step 12To allow chassis to free-wheel, unsolderwires to motor and remove both screws.This picture shows all the componentparts in sub-assembly.Service Department<strong>Bachmann</strong> Europe PLC,Moat Way, Barwell, Leicestershire, LE9 8EYTelephone: 0870 751 9990www.bachmann.co.uk
Step 3Remove screw and washer carefully.Step 4Remove bogie and locate small washerwhich sits under the bogie.Step 5Put the spring and two washers back inorder and secure in place with screw.Step 6Remove both big screws either side ofpivot from front of chassis.
Step 7Remove rear screw on the Cartazzitruck.Step 8Remove front screw on the Cartazzitruck.Step 9Lift Cartazzi truck out of chassis beingcareful with spring and washer.Step 10Remove both large screws at rear ofchassis.
Change language