alphaview brochure.indd - Genesis Digital Imaging

GrayscaleMM 20The AlphaView MM20 is a 2-megapixelgrayscale monitor engineered specificallyfor medical diagnostic imaging.Featuring an ultra-high luminance of1200 cd/m 2 , and an industry-leading fiveyear warranty, the MM20 is the idealdiagnostic imaging display for CT andMR diagnostic applications in a PACSenvironment.MM 30The AlphaView MM30 is a 3-megapixelLCD, the perfect choice for aDICOM-compliant grayscale diagnosticimaging display. With a maximumluminance of 900 cd/m 2 , a narrow bezel,an 11.5-bit grayscale palette and a full5-year warranty, the MM30 is ideallysuited for CR, DR and plain filmdiagnostic applications in a PACSenvironment.MM 50The ultra-high resolution AlphaView5-megapixel MM50 grayscale displaysets the standard for precise diagnosticimage viewing. When the applicationdemands the highest quality image andthe reliability of a 5-year warranty, theAlphaView MM50 rises above thecompetition. Ideal for digitalmammography, the MM50’s slimbezel makes it perfect for multi-viewenvironments.MODEL MM20 MM30 MM50Size & Type 21.3” TFT Active Matrix 21.3” TFT Active Matrix 20.1” TFT Active MatrixDisplay Size 17.0” (H) x 12.75” (V) 17.0” (H) x 12.75” (V) 15.7” (H) x 12.5” (V)Brightness (Max) 1200 cd/m 2 900 cd/m 2 850 cd/m 2Viewing Angle 170 o Horizontal and Vertical 170 o Horizontal and Vertical 170 o Horizontal and VerticalPixel Pitch 0.27mm x 0.27mm 0.2115mm x 0.2115mm 0.156mm x 0.156mmContrast Ratio 700:1 700:1 600:1ResolutionLandscapePortraitGradation Display1600 x 12001200 x 160010-bit (1021) Grayscale (Built-in11.5-bit LUT)2048 x 15361536 x 204810-bit (1021) Grayscale (Built-in11.5-bit LUT)2560 x 20482048 x 256010-bit (1021) Grayscale (Built-in11.5-bit LUT)Calibration Factory Calibrated for DICOM Compliance Factory Calibrated for DICOM Compliance Factory Calibrated for DICOM ComplianceInternal BLU SensorBuilt-in Sensor for AutomaticBacklight StabilizationBuilt-in Sensor for AutomaticBacklight StabilizationBuilt-in Sensor for AutomaticBacklight StabilizationInput Signal DVI Standard 1.0 DVI Standard 1.0 DVI Standard 1.0Serial Port RS-232C RS-232C RS-232CUSB Hub 1 Up Stream, 2 Down Stream 1 Up Stream, 2 Down Stream 1 Up Stream, 2 Down StreamUser Control OSD Control with Lock OSD Control with Lock OSD Control with LockPlug & Play VESA DDC2B VESA DDC2B VESA DDC2BPower AC Input 100-240VAC, 50/60HZ, Built-in SMPS 100-240VAC, 50/60HZ, Built-in SMPS 100-240VAC, 50/60HZ, Built-in SMPSPower Consumption 60W 60W 70WPower Saving Mode Less than 2W Less than 2W Less than 2WRegulatory ApprovalsFDA510k, FCC Part 18, CE,CUL (UL 60601-1, CSA C22.2 No. 601-1),CE (EN60601-1), MDDFDA510k, FCC Part 18, CE,CUL (UL 60601-1, CSA C22.2 No. 601-1),CE (EN60601-1), MDDFDA510k, FCC Part 18, CE,CUL (UL 60601-1, CSA C22.2 No. 601-1),CE (EN60601-1), MDDVESA Wall/Arm Mounting VESA-standard, 100 x 100mm VESA-standard, 100 x 100mm VESA-standard, 100 x 100mmMechanical Function Height/Tilt/Swivel/Pivot Height/Tilt/Swivel/Pivot Height/Tilt/Swivel/PivotDimension (without stand) 18.5” (W) x 14.5” (H) x 3.5” (D) 18.5” (W) x 14.5” (H) x 3.5” (D) 17.25” (W) x 14.0” (H) x 3.8” (D)Optional ItemCalibration Photosensor withCalibration Software, Network CalibrationSoftware, Quality Assurance SoftwareCalibration Photosensor withCalibration Software, Network CalibrationSoftware, Quality Assurance SoftwareCalibration Photosensor withCalibration Software, Network CalibrationSoftware, Quality Assurance Software