FD 260-10 Feeder for FD 260 Tabber - Formax

3. POWER CONNECTIONWARNINGBEFORE PLUGGING THE FD 260-10 INTO ANOUTLET, CAREFULLY READ THE FOLLOWINGINFORMATION ABOUT VOLTAGES, FUSES ANDTHE POWER CORD.3.1 SafetyThe FD 260-10 can connect to any power distributionsystem, including the European IT Power System.Because the European IT Power System does nothave a grounded neutral leg, the FD 260-10 usesprotective fusing in both the neutral and hot supplylines of power.WARNINGA BLOWN FUSE IN THE NEUTRAL LEG COULDMEAN INTERIOR PARTS OF THE FD 260-10REMAIN AT A HAZARDOUS VOLTAGE. ALWAYSUNPLUG THE POWER CORD BEFORE REMOVINGCOVERS FROM THE FD 260-10.3.2 Line VoltageThe FD 260-10 is rated for continuous operationusing a variety of supply voltages. Possible linevoltages are 240V, 230V, 220V, 120V and 100V at 50or 60 Hz. The manufacturer configures the FD 260-10 to operate with the voltage requested by thecustomer.CAUTIONVERIFY THE CORRECT VOLTAGE SETTINGBEFORE PLUGGING THE FD 260-10 INTO ANOUTLET.Read the current voltage setting through theVOLTAGE SELECTOR WINDOW on the input end ofthe FD 260-10 (refer to Figure 3.1). Use thefollowing instructions to change the voltage setting:8