11.07.2015 Views

R3131 Spectrum Analyzer Operation Manual - Dudleylab.com

R3131 Spectrum Analyzer Operation Manual - Dudleylab.com

R3131 Spectrum Analyzer Operation Manual - Dudleylab.com

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>R3131</strong> <strong>Spectrum</strong> <strong>Analyzer</strong> <strong>Operation</strong> <strong>Manual</strong>1.4 System Checkout1.4 System CheckoutThis section describes the Self Test which must be performed when operating the spectrum analyzer for thefirst time. Follow the procedure below:1. Make sure that the POWER switch on the front panel is in the OFF position.2. Connect the power cable provided to the AC power supply connector on the rear panel.CAUTION:To prevent damage, operate the spectrum analyzer within specified input voltage and frequencyranges.AC power supply connectorFigure 1-4 Connecting the Power Supply Cable3. Connect the power cable to the outlet.4. Press the POWER switch to the ON position.The spectrum analyzer performs the Initial test for approximately three seconds, then displays the startupscreen as shown in Figure 1-5.NOTE:There is a possibility that the screen display is different from the one shown in Figure 1-5, dependingon previously saved conditions.1-8 Jul 10/98

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!