Tankless Rack System - Rinnai

More documents

Recommendations

Info

Relief Valve PipingEach Rinnai tankless water heater on the TRS comes installed with Isolaon valves and a pressure relief valve.Refer to the installaon and operaon manual for more informaon on proper piping for the relief valve drain.Pressure Relief ValveIsolaon ValvePiping for Mulple RacksMulple rack systems should be installed in parallel using a secondary manifold from the building cold and hotwater supply. Reference the drawing for guidance.A low pressure gas regulator must be installed prior to the rack system. Note the maximum cumulave input forthe system when sizing the gas regulator.Use common plumbing pracce and reference all applicable codes when sizing the secondary manifolds and gasregulator.10 Rinnai Rack Installation
11 Rinnai Rack Installation
Page 5 and 6: SpecificaonsDescription(2) RU98Wall
Page 7: ClearancesInstall the rack system s
Page 13 and 14: Condensate DrainEach Rinnai tankles
Page 15 and 16: MSB InstallaonAll of the water heat
Page 17 and 18: Final Checklist□ The water heater
Page 19 and 20: or damaged during return shipping,

Tankless Rack System - Rinnai

Create successful ePaper yourself

Delete template?

Save as template?