Extreme Networks Consolidated "i" Series Hardware Installation Guide

2 Site PreparationThis chapter describes how to prepare your site for installing Extreme Networks equipment. It containsinformation about environmental and cabling requirements, power requirements, and building andelectrical code organizations.This chapter includes these sections:• Planning Your Site on page 28• Meeting Site Requirements on page 28• Planning for Stacking on page 41• Evaluating and Meeting Cable Requirements on page 44• Meeting Power Requirements on page 49• Applicable Industry Standards on page 53• Planning for Optical Budgets on page 54The requirements described in this chapter are intended for the system administrator, networkequipment technician, or network manager who is responsible for installing and managing the networkhardware. It assumes a working knowledge of local area network (LAN) operations, and a familiaritywith communications protocols that are used on interconnected LANs. Installation, maintenance, andremoval of a switch, chassis, or its components must be done by qualified service personnel only.Qualified service personnel have had appropriate technical training and experience that is necessary tobe aware of the hazards to which they are exposed when performing a task and of measures tominimize the danger to themselves or other people.By carefully planning your site, you can maximize the performance of your existing network and ensurethat it is ready to migrate to future networking technologies.To learn more about safety issues and to ensure safety compliance, see Appendix A.WARNING!Read the safety information in Appendix A thoroughly before installing your Extreme Networks switch.Failure to follow this safety information can lead to personal injury or damage to the equipment.Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide 27