Modeling Military Communication

More documents

Recommendations

Info

1590 Modeling Tactical Military Communications Using JCSSNodal SHF Terminal• Setup is similar to Non-Nodal SHF• A single link is needed between twoterminals• Requires circuit creation between inputports of each terminal• One uplink MUX channel to carryoutgoing traffic• Four downlink deMUX channels tocarry incoming traffic• Contains eight input ports• Supports TSSP protocol• Capable of supporting a full meshconfiguration of nodal terminals• Up to five interconnected nodalterminalsTSSP FrameA B C DData from respective inputsA BC DE FG HCONFIDENTIAL ─ RESTRICTED ACCESS: This information may not be disclosed, copied, or transmitted in any format without the prior written consent of OPNET Technologies, Inc. © 2010 OPNET Technologies, Inc.44
1590 Modeling Tactical Military Communications Using JCSSJoint IP Modem (JIPM)• Satellite system with IP-based terminals• DoD specification for open-standards, interoperable, IP satellitemodem• Based on DVB-S2 and DVB/RCS open standards for satellitecommunications• Successful, widely used ETSI standard• One-way and 2-way communication• Efficient use of bandwidth• High data rates ( >100Mbps downlink)• Hub-Spoke architecture• Extra requirements mainly for Layer-3• Extra security requirements to fit DoD applications• Models Remote Modem (RM), Network Control Center (NCC) andsatelliteCONFIDENTIAL ─ RESTRICTED ACCESS: This information may not be disclosed, copied, or transmitted in any format without the prior written consent of OPNET Technologies, Inc. © 2010 OPNET Technologies, Inc.45
Page 1: Session 1590Modeling Tactical Milit
Page 4 and 5: 1590 Modeling Tactical Military Com

Modeling Military Communication

Create successful ePaper yourself

Delete template?

Save as template?