Regloplas- Temperature Control Technology

More documents

Recommendations

Info

Interconnecting system(insulating channels)Max. operating temperature 300 °C.Max. pressure 16 bar.Item Description Order No.1 Channel with 4 tubes, L = 1 mChannel with 4 tubes, L = 2 mChannel with 4 tubes, L = 2.5 m480-080635480-080636480-0806372 Elbow 480-03916233aAdapter M 30/24° – M 18/60°for connections of channel to hoseM 26 x 1.5Adapter M 30/24° – M 18/60°for connection of channel to hoseM 18 x 1.5301-080809301-0808164 Angled coupling W 22-PLfor inter-connection of channel5 Angled coupling, EVW 22-PLfor connection of channel to hose305-068107305-0681206 Straight coupling G 22-PL 305-0680357 Hose M 26 x 1.5 bzw. M 18 x 1.5 Page 26,item 2 – 4Advantages– Reduction of heat losses over long distancesbetween consumer and temperature controlunit.– Increased safety: Tubes are sturdier thanhose lines.– Savings in time and costs: Instead of buildingthe installation yourself, a complete connectionsystem including screw couplings,hoses, etc. is at your disposal.RemarksFor safety reasons and in order to compensatefor expansion due to heat, we recommendusing heat-insulated all-metal flexible tubesfor high temperatures between temperaturecontrol unit, insulating channel and insulatingchannel-consumer.Depending on the temperature, suitable heatinsulatedplastic tubes can also be used.Further accessories on request28
<strong>Temperature</strong> sensorsAccessoriesExample fororderingType Resistance thermometer ThermocoupleStandard Variablemounting depthStandard Variablemounting depthMineralinsulatedMeasuring element 1 x Pt100 (DIN) J (Fe-CuNi) DIN or K (NiCr-Ni) DINContinuous 400 °C 400 °CtemperatureInsulation of wire Silicon-impregnated glass-fibre Silicon-impregnated glass-fibreShieldingSteel braidSteel braidof cableMaterial of the St V 2 A Brass St V 2 Ameasuring sleeveDimensions Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5StandardsensorPt100No. 151-046110Sensor withvariablemountingdepht Pt100No. 151-046120*J (Fe-CuNi)No. 151-046112K (Ni-CrNi)No. 151-046062Notes *Bayonet coupling No.151-046200 included (Fig. 4)Sensor withvariablemounting dephtJ (Fe-CuNi)No. 151-046122*K (Ni-CrNi)No. 151-046063*StandardsensorMineralinsulatedthermocoupleJ (Fe-CuNi)No. 151-046180K (Ni-CrNi)No. 151-046185Fig. 1: Standard sensor (plug Pt100)➀ Active zone of sensor Pt100Fig. 2: Sensor Pt100 with variable mounting depth➀ Active zoneFig. 3: Sensor with thermocoupleFurther accessories on request29
Page 1: MASTER OF TEMPERATURE CONTROLReglop
Page 5: Standard equipmentElectrical sectio
Page 8 and 9: Pressurised-watertemperature contro
Page 10: Technical data P100S P100M P140smar
Page 13 and 14: Standard equipmentElectrical sectio
Page 15 and 16: Pump capacity. Flow rate Vas a func
Page 17 and 18: Equipment RT100 RT61 RT32Operation
Page 19 and 20: Models with air-cooled condenser an
Page 21 and 22: REG Descaling unit• Incorporated
Page 23 and 24: InterpretingRegloplas dataNotesThe
Page 25 and 26: FittingsDimensions in mm if not spe
Page 27: 4. Twin connector with ball cocks f
Page 31 and 32: Since there is very little systemat

Regloplas- Temperature Control Technology

Create successful ePaper yourself

Delete template?

Save as template?