2P/2P 6~10KVA Online UPS User Manual - Voltron

More documents

Recommendations

Info

3. Operations3-1. Button OperationButtonON/Enter ButtonOFF/ESC ButtonTest/Up ButtonMute/Down ButtonTest/Up +Mute/Down ButtonFunction‣ Turn on the UPS: Press and hold the button more than 0.5s to turn on the UPS.‣ Enter Key: Press this button to confirm the selection in setting menu.‣ Turn off the UPS: Press and hold the button more than 0.5s to turn off the UPS.‣ Esc key: Press this button to return to last menu in setting menu.‣ Battery test: Press and hold the button more than 0.5s to test the battery whilein AC mode or CVCF* mode.‣ UP key: Press this button to display next selection in setting menu.‣ Mute the alarm: Press and hold the button more than 0.5s to mute the buzzer.Please refer to section 3-4-9 for details.‣ Down key: Press this button to display previous selection in setting menu.‣ Press and hold the two buttons simultaneous more than 1s to enter/escape thesetting menu.* CVCF means Constant Voltage and Constant Frequency.3-2. LED Indicators and LCD PanelLCD panelLED Indicators:There are 4 LEDs on front panel to show the UPS working status:Mode LED Bypass Line Battery FaultUPS On ● ● ● ●No Output mode ○ ○ ○ ○Bypass mode ● ○ ○ ○AC mode ○ ● ○ ○Battery mode ○ ○ ● ○CVCF mode ○ ● ○ ○Battery Test ● ● ● ○ECO mode ● ● ○ ○Fault ○ ○ ○ ●Note: ● means LED is lighting, and ○ means LED is faded.LED indicators7
LCD Panel:DisplayBackup time informationFault informationFunctionIndicates the battery discharge time in numbers.H: hours, M: minutes, S: secondsIndicates that the warning and fault occurs.Indicates the fault codes, and the codes are listed in details in section 3-9.Mute operationIndicates that the UPS alarm is disabled.Output & Battery voltage informationIndicates the output voltage, frequency or battery voltage.Vac: output voltage, Vdc: battery voltage, Hz: frequencyLoad informationIndicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.Indicates overload.Indicates the load or the output is short.Mode operation informationIndicates the UPS connects to the mains.Indicates the battery is working.Indicates the bypass circuit is working.Indicates the ECO mode is enabled.Indicates the Inverter circuit is working.Indicates the output is working.Battery informationIndicates the Battery capacity by 0-25%, 26-50%, 51-75%, and 76-100%.8
Page 2 and 3: Please comply with all warnings and
Page 4 and 5: 1. Safety and EMC instructionsPleas
Page 7 and 8: Diagram 3 : 10K Input/Output Termin
Page 9: NOTE 2: Please install the output b
Page 13 and 14: for system safety.5) If the overloa
Page 15 and 16: 3-5. Abbreviation Meaning in LCD Di
Page 17 and 18: • 01: Output voltageInterface•
Page 19 and 20: • 05: Voltage range for bypassInt
Page 21 and 22: • 13: Battery voltage calibration
Page 23 and 24: AC mode Description When the input
Page 25 and 26: LCD displayWarningstatusDescription
Page 27 and 28: 4. Trouble ShootingIf the UPS syste
Page 29 and 30: 5. Storage and Maintenance5-1. Stor

2P/2P 6~10KVA Online UPS User Manual - Voltron

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?